FCC ID: SNA-V420 V420 Rat Snap Trap

1. ACCOUNT SET-UP 5. CONNECT TRAP TO THE NETWORK 1. Before you begin, confirm that you have a VLINK account created and an Admin has added you to the account. Contact your VLINK sales representative for confirmation if you are unsure. 2. Confirm that you can successfully log-in at www.vlinkhq.com. 1. Hold the back end of the trap, place both thumbs on the thumb grips. 2. Pull bar back into the easy-set latch until it clicks and locks. 3. Take notice of LED light sequences on the back left corner of the trap. NOTE: Setting the trap can only be successfully accomplished if the trap is level. If it is tilted significantly, it will not set. Rodent Grabbing Teeth 2. CONNECT THE GATEWAY Bait Cup Plug in the gateway. If you are planning to use your local network, plug your ethernet cable into the ethernet port. For all other gateway instructions, refer to the manual provided with the unit. 3. DOWNLOAD THE APP 1. Search for the Victor VLINK app from the Apple App Store or Google Play Store and download to your device. LED Light Sequences 1. Green Flash When Set: The trap Is set and fully powered on. 2. Yellow Flash: The trap is disengaged and in power saving mode. 3. Red Flash When Set: The trap is set but the battery is low. 4. Blue Flash: The trap successfully communicated with the network. START-UP GUIDE Set Bar Thumb Grips LED Indicator Light Easy-Set Latch Trap Mounting Holes Kill-Bar Bait Tie Down QR Code Label Kill-Bar/Antenna 2. Log-in using your VLINK account credentials. 6. PLACE TRAP Victor VLINK Mouse Trap Model: V420 | Victor VLINK Rat Trap Model: V430 3. Launch the app and follow the on-screen instructions to connect your trap to the app. Once your trap is connected, place it in the area of rodent activity and wait for the trap to alert you of a capture. 4. BAIT TRAPS 7. RESET TRAP AFTER A KILL Paste Baits 1. Place paste baits in the bait cup container. 2. Place bait in cup firmly to prevent it from being pulled out easily by the rodent. 3. Placing bait on the trigger petal may lead to non-capture triggers. Tied Baits 1. Tie desired bait to raised Victor V. 2. Orient bait towards middle of trap pedal. 1. If a rodent has been captured, record your kill data using the VLINK Mobile App. 2. Once the rodent is removed, the trap is ready to be baited and reset for another capture. 3. To reset, simply pull the kill bar back to the set position and wait for the green and blue LED flashes to let you know the trap is communicating and ready for another kill. Pro Tip: Avoid using strong cleaning products on the traps. A captured rodent can leave behind scent and odor that can make the trap more attractive to other rodents. 1. CONFIGURATION DU COMPTE 5. CONNECTER LA TRAPPE AU RSEAU 1. Avant de commencer, confirmez que vous avez un compte VLINK cr et qu'un administrateur vous a ajout ce compte. En cas de doute, contactez votre reprsentant commercial VLINK pour obtenir une confirmation. 2. Confirmez que vous pouvez vous connecter avec succs l'adresse www.vlinkhq.com. 1. Tenez l'extrmit arrire du pige, placez les deux pouces sur les poignes. 2. Tirez la barre dans le loquet rglage facile jusqu' ce qu'elle s'enclenche et se verrouille. 3. Observez les squences lumineuses DEL dans le coin arrire gauche du pige. Dents attrapant les rongeurs 2. CONNECTER LA PASSERELLE Branchez la passerelle. Gobelet dappt Si vous prvoyez d'utiliser votre rseau local, branchez votre cble Ethernet dans le port Ethernet. Pour toutes les autres instructions relatives la passerelle, reportez-vous au manuel fourni avec l'appareil. 3. TLCHARGER L'APPLICATION 1. Recherchez l'application Victor VLINK sur l'App Store dApple ou le Google Play Store et tlchargez-la sur votre appareil. NOTE : La pose du pige ne peut tre effectue avec succs que si le pige est niveau. S'il est fortement inclin, il ne sactivera pas. Squences lumineuses DEL 1. Clignotement vert lorsque pos :

Le pige est enclench et entirement activ. 2. Clignotement jaune : Le pige est dsactiv et en mode d'conomie d'nergie. 3. Clignotement rouge lorsque pos :

Le pige est enclench mais la batterie est faible. 4. Clignotement bleu : Le pige a russi communiquer avec le rseau. GUIDE DE DMARRAGE Poignes de la barre dactivation Tmoin lumineux DEL Loquet rglage facile Trous de fixation du pig Kill-Bar Attache d'appt tiquette du code QR Barre de capture/

Antenne 2. Connectez-vous l'aide de vos identifiants de compte VLINK. 6. PLACEMENT DU PIGE Modle de pige souris Victor VLINK : V420 | Modle de pige rats Victor VLINK : V430 3. Lancez l'application et suivez les instructions l'cran pour connecter votre pige l'application. Once your trap is connected, place it in the area of rodent activity and wait for the trap to alert you of a capture. 4. PIGES APPT 7. RACTIVER LE PIGE APRS UNE CAPTURE Appts en pte 1. Placez la pte dans le rcipient du gobelet appt. 1. Si un rongeur a t captur, enregistrez vos donnes de capture en utilisant l'application mobile VLINK. 2. Placez fermement l'appt dans la tasse pour viter qu'il ne soit facilement retir par le rongeur. 3. Placer un appt sur la pdale de dclenchement peut entraner des dclenchements sans capture. Appts attachs 1. Attachez l'appt dsir au V Victor lev. 2. Orientez l'appt vers le milieu de la pdale du pige. 2. Une fois le rongeur enlev, le pige est prt tre appt et remis en place pour une nouvelle capture. 3. Pour le ractiver, il suffit de ramener la barre de capture la position dactivation et d'attendre que les lumires DEL verte et bleue clignotent pour vous indiquer que le pige communique et qu'il est prt pour une nouvelle capture. Astuce pro : vitez d'utiliser des produits de nettoyage puissants sur les piges. Un rongeur captur peut laisser derrire lui une odeur qui peut rendre le pige plus attrayant pour les autres rongeurs. Design Patent No. D904,551 Design Patent No. D904,550 Patent Pending UK Registered Design No. 6081591

1.375 1/8 ROUNDED CORNERS FCC ID: SNA-V420 IC: 9458A-V420 Model / Modle: V420 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la partie 15 des rglements de la FCC. Son fonctionnement est soumis aux conditions suivantes: (1) ce dispositif ne doit pas provoquer de brouillage prjudiciable; (2) il doit accepter tout brouillage reu, y compris le brouillage qui pourrait nuire son fonctionnement. Manufactured For / Fabriqu Pour:

Woodstream Corporation 69 N. Locust St. Lititz, PA 17543 1-800-800-1819 Imported By / Import Par:

Woodstream Canada Corporation 25 Bramtree Court, Unit 1 Brampton, ON L6S 6G2 Manufactured under U.S. Patent No. D904,551;

9,743,657; 10,111,416; 10,499,633; 10,863,732 Patent Pending PLACE QR CODE STICKER HERE 3.250

69 N. Locust Street Lititz, PA 17543

(800) 800-1819 www.woodstreamcorp.com Authority to Act as Agent Date: March 26, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Steve Fanella from BEC Incorporated is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _03/25/2022 By:

Title:

On behalf of: __________________________ Telephone:

(Print name) __________________________ __________________________

(Company Name-Legrand)

(Signature1) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Dwayne ArrighyElectronic Compliance ManagerWoodstream Corporation717-740-4600 Ext.1294

69 N. Locust Street Lititz, PA 17543

(800) 800-1819 www.woodstreamcorp.com Request for Confidentiality Date: April 1, 2021 Subject: Confidentiality Request for: FCC ID: SNA-V420 and IC: 9458A-V420 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Woodstream Corporation has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) ________________________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. Electronic Compliance ManagerDwayne Arrighy

69 N. Locust Street P.O. Box 327 Lititz, PA 17543-0327 OODSTREAM en exe Fax: (717) 626-1912 www.woodstreamcorp.com 10/8/2019 To Whom It May Concern:

We hereby delegate CKC Certification Services, LLC (CKC CS) power of attorney to act on our behalf in matters pertaining to certification of products. The actions of CKC CS shall be considered the same as our own. Sincerely, Dwayne Atrighy Electronic Product Cmpliance Engineer