FCC ID: 2BD76-X2 Body Worn Camera

PRODUCTMANUALwrap.com WRAP INTRENSIC X2 BODY WORN CAMERA Contact: 800-583-2652, option 4 | support@wrap.com | wrap.com/intrensic 2023 WRAP TECHNOLOGIES, INC. | ALL RIGHTS RESERVED WRAP INTRENSIC X2 BODY WORN CAMERA CONTENTS Camera Introduction Features and Specifications Camera Buttons/Functions Legend Charging and Status LEDs Guide to Upload from Your MDT To Change to Record Reminder Feature FCC Warning 1 2 4 5 6 8 9-10 WRAP INTRENSIC X2 BODY WORN CAMERA CAMERA INTRODUCTION Optional Mounts MOLLE Mount Fixed Outer Carrier Wrap Intrensic X2 Camera Wrap Intrensic | Evidence on Cloud Technical Support Magnetic Camera-Mounting Stud Stud 800-583-2652, option 4 support@wrap.com To log onto Evidence on Cloud:

app.intrensic.com Your kit contains:

1 Camera 1 1 1 Alligator Clip Mount Camera Dock

(Charging/Transferring) 1 USB Cable (1 m or 39 in) 1 110-120V AC to USB Wall Charger 1 Camera Introduction Booklet PAGE 1 WRAP INTRENSIC X2 BODY WORN CAMERA FEATURES Battery life - up to 14 hours Front video record button Captures photos while video continues uninterrupted Digital Audio Recorder GPS One button activates Discreet Mode IP67 Notifications & Alerts: Recording Reminder, Low Battery, Low Storage Secured: Evidence & Settings SPECIFICATIONS Video resolution Low light Camera resolution FOV Battery life Image stabilization Charging dock Charge time Battery capacity Storage Video file format Storage type Pre/Post Event Recording Up to 1440 Auto/manual 40MP 140 Up to 14 hours Yes Yes + data 250 minutes 3200mAh 64GB

.MP4 Internal Yes One-touch recording Record reminder GPS Bluetooth Photos while recording Password protection Waterproof rating USB LCD screen Weight (ounces) Dimensions Warranty Multiple mounts Yes Yes Yes Yes Yes Yes IP67 Yes Yes 5.75 3.3" x 2.2" x 1"

1 year & optional extended Yes FRONT Light sensor R. IR light Microphone Lens Video Recording Button 1 SIDE 1 USB port Discreet button Charging LED Status LED Photo Button 1 Video Recording Button 2 TOP SIDE 2 Photo button 2 Low light button Digital audio button Power button BACK Mounting slot Speaker LCD screen Menu controls Playback button Down arrow

(Photo: zoom-out) Menu button Up arrow

(Photo: zoom-in) PAGE 2 WRAP INTRENSIC X2 BODY WORN CAMERA Camera Power ON/OFF Power On/Standby When the camera is powered OFF, press, and hold the power button for 3 seconds to turn the camera ON. The camera will vibrate once The status LED will turn solid green The LCD screen will remain off If using the Pre-Event Recording Mode feature, the Status LED will be solid red. Power Off When the camera is powered ON, press, and hold the power button for 3 seconds to turn the camera OFF. The camera will beep once The camera will quickly vibrate three times The Wrap Intrensic logo will display on the LCD screen The status LED will turn off Video Recording When the camera is powered on/standby mode but is not currently recording:

Start = Single-Press the video recording button to start recording video Stop = Double-Press (default) the video recording button again to stop the recording.

* There is an optional single-tap stop programmable in the camera manager If you press the Digital audio recording button during a video recording, the video recording will save to a file and begin a new digital audio recording. PhotographSnapshot Capture When the camera is powered on/standby mode but is not currently recording, press the photo button 1 or 2 to take a photograph. This will be a higher resolution photograph (note zoom-in and zoom-out features available.) Screenshot When the camera is recording a video, press photo button 1 or 2 to take a snapshot from the recording video. This photo will be smaller in size than a regular photo. Note: Taking a screenshot does not disrupt your video recording. It copies one frame from your video as a photo and saves it separate from the video recording. The photo will be much smaller and a reduced quality. Audio Recording When the camera is powered on/standby mode but is not currently recording:

Start = Single-Press the audio recording button to start recording audio Status LED will flash green while recording audio Stop = Double-Press the audio recording button again to stop recording If you press either of the Video recording buttons during a digital audio recording, the audio recording will save to a file and begin a new video recording. PAGE 3 BUTTON/

FUNCTION LEGEND Power button Video recording buttons

(front and top) Digital audio recording button Photo recording button Low light button PTT button

(Same as photo recording button) SOS button

(Discreet mode) Menu button Up-arrow button Down-arrow button Playback button BUTTON BUTTON ICON OPERATION FUNCTION Press once Hold for 3 seconds Turn the LCD ON/OFF Turn the camera ON/OFF Press once Start recording when the camera is powered ON Press and hold for 3 Seconds Start recording when the camera is powered OFF Press twice Press once Press twice Press once Press once Hold for 3 seconds Press once Press and hold Press once Press once Hold for 3 seconds Press once Hold for 3 seconds Press once Hold for 3 seconds Stop recording a video (default) Start recording (camera on) Stop recording (default) Take a photo Turn low light ON/OFF Turn flashlight ON/OFF Take a photo While recording video or audio, press and hold the SOS button to mute the audio recording Menu and/or confirm selection Scroll up/left Zoom out Scroll down/right Zoom in Go back/exit Playback last recorded file Reset the camera by holding both the top video recording button and the power button at the same time. Reset the camera: No settings or evidence will be lost PAGE 4 Reset Press and hold for 10 seconds WRAP INTRENSIC X2 BODY WORN CAMERA Charging and Status LEDs Fully charge the X2 camera using the included USB cable and charging dock for 34 hours.

* The charging indicator on the top of the camera will turn solid blue LED when charging. When the device is fully charged, the blue LED will turn off. Charging LED Blue : Charging OFF : Charged Status LED Solid Green: Camera is On Solid Red: Pre-Event Buffering Flashing Green: Audio Recording Flashing Red: Video Recording LCD Display Press the Power button once to wake the LCD when the camera is powered on or press any of the menu buttons below the LCD. Bluetooth is ON Recording remaining time

(# hrs. remaining memory) 1080P30 000:00:00 GPS Recording resolution Remaining battery Recording indicator Elapsed time of recorded event Agency and your ID#

XX:XX:XX YYYY/MM/DDHH:MM:SS xx.xxG/xx.xxG Camera time and date Space Remaining of Total Formatted Space Guide to Upload to TOC

(Multi-Camera Kiosk Mode) Power the Wrap Intrensic X2 Camera OFF and place in docking dtation. If the camera is assigned and the PIN requirement is OFF the camera will automatically begin to offload. If the camera is not assigned, you will see this screen and must identify yourself prior to uploading if the PIN requirement is OFF after selecting yourself from the list, the camera will begin to offload. If the PIN requirement is ON for your agency, you will see this screen and must code your PIN# for the camera to begin offloading. When its completed, the message will display for 30 seconds after the offload to indicate the offload is complete, and you may remove your camera. Note: After the offload and upload to the cloud you may go to the link below to identify and categorize your videos. A new screen Evidence Labeling is now available to assist you in labeling your evidence. Visit app.intrensic.com

** Ask about our CAD/RMS integration. It saves time and adds consistency. PAGE 5 WRAP INTRENSIC X2 BODY WORN CAMERA Guide to Upload from Your MDT

(Single-Dock Mobile or Desktop) From your MDT or desktop make sure the Wrap Intrensic uploader is installed per the previous instructions and connected to the single docking station with the USB cable provided. Power-off the camera, then dock the Wrap Intrensic X2 camera in your single dock supplied (connected to MDT or desktop) When prompted, log in with your username and password

(this tells the system where to park your files) Preview, edit, and add identifiers to your evidence, then hit Send to Cloud. The video will be copied from the camera to the computer where they will process and upload to the cloud. Once prompted, Video Transferred, Safe to Remove your Camera, unplug your camera and place back in service. 1 2 3 4 5 PAGE 6 Evidence on CloudTM navigation menu

* Change your password

** Before using the Wrap Intrensic System, change your password from the Wrap Intrensic default password

(Admin.) Agency settings menu

(Admin.) Global settings and categories

(Admin.) Global user settings

(Admin.) Agency org chart The NEW evidence labeling Evidence menu Case menu Share menu Reports menu Wrap Intrensic camera uploader PAGE 7 Log in screen to the Wrap Intrensic Evidence on CloudTM website Visit app.intrensic.com WRAP INTRENSIC X2 BODY WORN CAMERA Add Your Wrap Intrensic Uploader (New Install) To Change to Record Reminder Feature

(User Selectable) 1 2 3 4 5 Open your browser and go to app.intrensic.com Log in to the Wrap Intrensic Evidence on CloudTM Select the last item in the menu: Wrap Intrensic Uploader Click the icon to download then click set-up in toolbar Follow instructions to complete set-up Single press the first button on the back to wake up the device. Single press again to Enter Password. The password is [SIX] 0s, or just hit the main ENTER button (the first button below the screen) six times. After entering the password, press button 3 to highlight the gear, and button 1 to select. Press button 3 to scroll down to record reminder and select using 1. Scroll through the options and select with button 1 PAGE 8 Enter button Up arrow Down arrow Escape/

back WRAP INTRENSIC X2 BODY WORN CAMERA FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Specific Absorption Rate (SAR) information:

This X2 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement PAGE 9 WRAP INTRENSIC X2 BODY WORN CAMERA FCC Warning This radio is designed for and classified as General population/uncontrolled Use, the guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.The exposure standard for wireless radio employs a unit of measurement known as the Specific Absorption Rate, or SAR, the SAR limit set 1.6W/kg. Body-worn operation; this device was tested for typical body-worn operations with the back of the handset kept 0mm for body worn. To maintain compliance with RF exposure requirements, use accessories that maintain a 0mm for body worn. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. The highest reported SAR value for worn on the body is 0.626 W/kg PAGE 10 2023 WRAP TECHNOLOGIES, INC. | ALL RIGHTS RESERVED

Wrap Technologies, Inc. (Wrap Intrensic) Section 2.911(d)(5)(i) Certification Equipment Type Company name: Wrap Technologies, Inc. (Wrap Intrensic) Address: 1817 W 4th Street, Tempe, AZ 85281 USA Product Name: Body Worn Camera FCC ID: 2BD76-X2 Model(s): X2 2.911(d)(5)(i) Equipment Type We, [Wrap Technologies, Inc. (Wrap Intrensic)] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Matt Campagni Date: 2024-01-04 Title and Company name: SVP, Operations/ Wrap Technologies, Inc. (Wrap Intrensic) NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Wrap Technologies, Inc. (Wrap Intrensic) Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Wrap Technologies, Inc. (Wrap Intrensic) Address: 1817 W 4th Street, Tempe, AZ 85281 USA Product Name: Body Worn Camera FCC ID: 2BD76-X2 Model(s): X2 2.911(d)(5)(ii) Applicant filing We, [Wrap Technologies, Inc. (Wrap Intrensic)] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Matt Campagni Date: 2023-12-27 Title and Company name: SVP, Operations/ Wrap Technologies, Inc. (Wrap Intrensic) NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Wrap Technologies, Inc. (Wrap Intrensic) Section 2.911(d)(7) USA Agent for Service of Process Company name: Wrap Technologies, Inc. (Wrap Intrensic) Address:1817 W 4th Street, Tempe, AZ 85281 USA Product Name: Body Worn Camera FCC ID: 2BD76-X2 Model(s): X2 2.911(d)(7) USA Designated Agent for Service of Process We, [Wrap Technologies, Inc. (Wrap Intrensic)] (the applicant) designate [Wrap Technologies, Inc. (Wrap Intrensic)] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wrap Technologies, Inc.

(Wrap Intrensic) USA Address: 1817 W 4th Street, Tempe, AZ 85281 USA Applicant Company name: Wrap Technologies, Inc.

(Wrap Intrensic) Address: 1817 W 4th Street, Tempe, AZ 85281 USA FRN Number: 0034641043 Contact Name: Matt Campagni Telephone No: (800) 583-2652 Email: support@wrap.com Grantee FRN Number:0034641043 FCC Grantee Code: 2BD76 Contact Name: Matt Campagni Telephone No: (800) 583-2652 Email: support@wrap.com Signature:

Signature:

2.911 (d)(7)USA Agent v1.5 Wrap Technologies, Inc. (Wrap Intrensic) Title: SVP, Operations Date: 2023-12-27 Title: SVP, Operations Date: 2023-12-27 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.5

Wrap Technologies, Inc. (Wrap Intrensic) Agent Authorization Company: Wrap Technologies, Inc. (Wrap Intrensic) Address:1817 W 4th Street, Tempe, AZ 85281 USA Product Name:Body Worn Camera Model Number(s):X2 Product Description:Body Worn Camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023-12-27 Name:

Matt Campagni Title:

SVP, Operations Company: Wrap Technologies, Inc. (Wrap Intrensic)

Wrap Technologies, Inc. (Wrap Intrensic) Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2BD76-X2 Date: 2023-12-27 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Matt Campagni Title: SVP, Operations

Wrap Technologies, Inc. (Wrap Intrensic) FCC Software Configuration Control Declaration Date: December 27, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Body Worn Camera/ X2 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Matt Campagni Date: 2023-12-27 Title: SVP, Operations Signature of applicant FCC Software Configuration Control Declaration Rev1.1