FCC ID: 2ATY8-IPASONP3 Notebook Computer

1) FCC 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2FCC 15.21 Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 3) FCC 15.105 For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This Notebook Computer meets the government's requirements for exposure to radio waves. The guide lines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Notebook Computer (FCC ID: 2ATY8-IPASONP3) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification is 0.243W/kg when properly worn on the body. This device was tested for typical body-worn operations with the back of the Notebook Computer kept 00mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 00cm separation distance between the user's body and the back of the Notebook Computer. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. very high volume, prolonged listening to a mobile phone can damage your hearing.

IPASON P3 Notebook Computer MODEL: IPASON P3 INPUT: 20V==2.25A FCCID : 2ATY8-IPASONP3 Wuhan Ipason Technology MADE IN CHINA

|_SN: PS3 Co.,Ltd. I

Wuhan Ipason Technology Co., Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer FCC ID: 2ATY8-IPASONP3 Model(s): IPASON P3 2.911(d)(5)(i) Equipment Type We, Wuhan Ipason Technology Co., Ltd (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:

KATY LAU Date: 2023-03-16 Engineer Title:

Company name: Wuhan Ipason Technology Co., Ltd NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Wuhan Ipason Technology Co., Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer FCC ID: 2ATY8-IPASONP3 Model(s): IPASON P3 2.911(d)(5)(ii) Applicant filing We, Wuhan Ipason Technology Co., Ltd (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:

KATY LAU Date: 2023-03-16 Engineer Title:

Company name: Wuhan Ipason Technology Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Wuhan Ipason Technology Co., Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Apr-03-2023 Ref: Attestation Statement Part2.911(d)(7) filing FCC ID: 2ATY8-IPASONP3 Wuhan Ipason Technology Co., Ltd (the applicant) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(the agent) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name:

THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address:

1200 Broadway St. APT 329, Los Angeles, CA90015 Contact Person: Sijie Zhang Signature:

Tel: +1 267 909 3692 Email: abbyzhangmedia@gmail.com Applicant Company Name: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Signature:

Contact Person: KATY LAU Tel: +86-13532691034 Email: Kitty@qytexting.com

Wuhan Ipason Technology Co., Ltd Agent Authorization Company: Wuhan Ipason Technology Co., Ltd Address: 5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District, Wuhan City, Hubei Province, China Product Name: Notebook Computer Model Number(s): IPASON P3 Product Description: Notebook Computer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

KATY LAU Title:

Engineer Company: Wuhan Ipason Technology Co., Ltd Date: 2023-04-04

Wuhan Ipason Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Long Term Confidentiality FCC ID: 2ATY8-IPASONP3 Date: 2023-04-04 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: KATY LAU Title: Engineer

Wuhan Ipason Technology Co., Ltd FCC Software Configuration Control Declaration Date: April 4, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Notebook Computer / IPASON P3 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: KATY LAU Date: April 4, 2023 Title: Engineer Signature of applicant FCC Software Configuration Control Declaration Rev1.1.docx