Smart Label Printer Quick Start Guide NIIMBOT B1 Wuhan Jingchen Intelligent ldentificationTechnology Co., Ltd. Support Email : service@niimbot.com Official Website : www.niimbot.net Office Address :Creative Workshop No. 5, Creative World,Yezhihu West Road,Hondshan District,Wuhan, China Production Address : No. 1 Tianyang Road, Chuanlong Avenue, Hengdian Street, Huangpi District, Wuhan, China 2022 NIIMBOT. All rights reserved. NIIMBOT is a brand under Wuhan Jingchen Intelligent ldentification Technology Ltd. CONTENTS 01 Package Contents 02 Installation 03 Installing App 04 Connecting and Printing 05 Basic Functions 06 LED Indicators 07 Specifications 08 Safety Precautions 09 Related statements 02 03 05 06 07 08 09 10 12 01 02 01 Package Contents Smart Label Printer *1 Label Paper Roll *1 USB Type-C Cable *1 Quick Start Guide *1 02 Installation Open Slide 1 Press the Open Slide on the left to open the paper compartment. Print Side Fit the label paper into the compartment with the print side facing down. Tear-off Blade Paper Compartment Baffle 2 Push the paper compartment baffle to the sides and fit the label paper into the paper compartment with the print side facing down. Danger! Beware of shape blade when the paper compartment is open. 03 04 Paper Exit 3 Slide the paper compartment baffle inwards to secure the label paper, pull the first paper out, make sure it sticks out of the paper exit. Power Button Indicator Light 4 Close the paper compartment and long-press the Power Button to turn the printer on. 03 Installing App 1 Before using the printer, please install the NIIMBOT app from Google Play or the App Store. NIIMBOT Design & Print APP easy to download and use More information available on the NIIMBOT app. Sign in to NIIMBOT Me Help Center Hardware 2 Get the NIIM app for more label designs for homes. NIIM Design & Print APP easy to download and use 05 06 04 Connecting and Printing 1 Open NIIMBOT app and turn on Bluetooth on your phone. 8:30 Turn on Bluetooth NIIMBOT 2 On Home, tap Connect smart label printer. Then select device model. Notice: If a PIN code is required, input 0000 or 1234. 3 After connecting, tap on "Current label template" on the Home tab to enter the label editor. Special Notes Images of products, accessories, and the app in this manual are for illustrative purposes only and may be different from actual products. Products are subject to change without prior notice. 05 Basic Functions Function Operation Switch on Hold down the Power button for three seconds. Switch off Hold down the Power button for three seconds when the device is on. Print history Press the Power button once when the device is on. Print a test page Double-press the Power button when the device is on. 07 08 06 LED Indicators Indicator Status Description Blue Blue Blinking Hardware upgrading Solid Standby Green Blinking Printing Green Solid Bluetooth connected Red Red Blinking Charging Solid Paper compartment open/
Out of paper/Battery low 07 Specifications Product Label Printer Model NIIMBOT B1 Dimensions 132*91.2*61.6mm Weight 293g Charging Time 3.5 - 4 hours Input 5V DC, 1A Battery Capacity 1500mAh Printing Method Thermal printing Printing Resolution 203dpi Printing Width 20-48mm Connectivity BluetoothType-C Charge USB Type-C Transmit Power 4dBm(Maximum) Operating Temperature 5~40 09 10 08 Safety Precautions Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety.
*Warnings Don't disassemble the product without authorization. Disassembled products cannot be returned or exchanged. Do not wipe the product with corrosive chemicals or cleaning agents. Do not use the product near places with flammable products such as gas stations or fuel depots. 1. Please keep the product and accessories out of the reach of children or they must be used under the supervision and guidance of a guardian;
2. 3. 4. Turn off the power immediately when water gets into the product;
Turn off the power immediately in case of any product malfunction;
If you want to use a power adapter, always use one that is safe, regulatory-compliant, and compatible;
5. Do not disassemble the product to replace the battery. Improper operation may cause an explosion;
6. The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help;
7. Do not expose the product and the power adapter to high temperature or high humidity. Do not put them in water, otherwise a short circuit may occur and the battery may heat up, smoke, deform, damage, or even explode;
8. If smoke or smell comes from the product or the power adapter, please unplug the power adapter immediately and avoid any burns. 11 12 09 Related Statements FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction. Declaration of conformity Hereby, Wuhan Jingchen Intelligent Identifification Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. This product can be used across EU member states. This device can be used in European Union. Hereby, [Wuhan Jingchen Intelligent Identifification Technology Co., Ltd.]
declares that the radio equipment type [NIIMBOT D11] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://www.niimbot.com. Canadian Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. 13 14 Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement.