FCC ID: 2BCNH-65KEY Paw65

Paw65KEY Mechanical Keyboard 2.4G Bluetooth + USB Triple Mode Operation Instructions V1.01 Specifications of Keyboard Annotation 1 2 3 4 5 6 This instruction is only applicable to the operation requirements of Paw65KEY triple mode with RGB USB+BT+Bluetooth double mode connection, keyboard name: Paw65KEY RGB; PC computer support: independent driver It supports up to 4 devices pairing, bluetooth devices can be switched under 2.4g, no offline function. Bluetooth/2.4g mode, the battery enters the power supply state, and enters the first-level sleep mode

(turning off the light) if there is no operation for 5 minutes by default. Under the USB state, follow the PC to sleep, press any key then exit the sleep Remove the space bar cap: the physical switch is (left) Bluetooth-(middle) wired-(right) 2.4g Button and lighting effect description Fuction Key Combination Operation Instruction FN+|\

Lighting mode adjustment, 16 kinds of lighting effect and switching lights Support music rhythm, drive light recording function FN+DEL FN+/

FN+/

FN+G FN+ESC FN+TAB Color shift Addition and subtraction of backlight brightness Backlight speed Test mode

White light one button HOT KEY FN+BACKSPACE Long press 3S to restore factory settings, the lights default streamer FN+ right alt Decorative lighting effects,switches, driver support debugging, light color, speed and brightness FN+Z FN+X Shift to MAC,Z button flashes red 3 times to restore the default light effect Shift to WINX button flashes blue 3 times to restore the default light effect fn+1~+= F1~F12 FN+Win Lock Win, flash white,unlock then restore default lighting effect Win/ALT interchangeable in Mac mode, no need to lock Win Code pairing device No.1: Enter the pairing state, and the time for code pairing and searching for devices is 120 seconds. If the pairing is successful, it will display the Bluetooth input state, otherwise, it will exit the current state and recover to the state before code pairing Long press 3S FN + Q The LED enters the pairing status during pairing. The Q key flashes blue quickly, after the pairing is successful the lighting effect will be synchronized. State switch: Bluetooth is connected to Device1 Short press When the Bluetooth is not connected and search for Bluetooth devices,the W key flashes blue slowly during pairing,after successful connection, the lighting effect will be synchronized. Long press 3S Code pairing device No.2: Enter the pairing state, and the time or code pairing and searching for devices is 120 seconds. If the pairing is successful, it will display the Bluetooth input state otherwise, it will exit the current state The LED enters the pairing status during pairing. The W key flashes blue quickly, after the pairing is successful the lighting effect will be synchronized. State switch: Bluetooth is connected to Device2 Short press When the Bluetooth is not connected and search for Bluetooth devices,the W key flashes blue slowly during pairing,after successful connection, the lighting effect will be synchronized. Long press 3S Code pairing device No.3: Enter the pairing state, and the time or code pairing and searching for devices is 120 seconds. If the pairing is successful, it will display the Bluetooth input state otherwise, it will exit the current state The LED enters the pairing status during pairing. The E key flashes blue quickly, after the pairing is successful the lighting effect will be synchronized. State switch: Bluetooth is connected to Device3 Short press When the Bluetooth is not connected and search for Bluetooth devices,the E key flashes blue slowly during pairing,after successful connection, the lighting effect will be synchronized. Long press 3S Enter the matching state,the R button flashes green quickly,and stops flashing if the matching is successful. Short press Switch devices wirelessly,when the connection is successful, press the R key to synchronize the lighting effects. Bluetooth operation

(Support 3-way Bluetooth device connectio n) FN + W FN + E Wieless 2.4g operation FN + R Keyboard indicator light 1 FN indicator Light red long when the FN button is charging, when in low 3.3V, the red flashes quickly, and in 3.0V the keyboard will turn off after it is fully charged. (restores the current state mode indicator light) Charging/battery indicator 1 2 3 Low battery indicator Charging indication Shared with the FnSwitch light, when the battery is low, the red light flashes quickly. Shared with the FnSwitch light, the red light flashes to indicate charging, and there is no indication when fully charged. Battery check Press FN+left ALT to check the batteryunder 3 flashes redabove 3 flashes green. Electrical specifications 1 2 3 4 5 6 7 Operating current with back light on(white light) Operating current with back light off Sleep current Working current in bluetooth mode Operating voltage of USB 672ma 59ma 0.06ma Varies by lighting effects and brightness 4.8V Battery specifications 3544105/2250*2 Charging current of the battery 350ma This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction

C5266091_X24_Ed.2 Wuhan Ruobing Technology Co., Ltd Attestation Statements TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules for covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List1, which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) that prohibit equipment authorization 2BCNH-65KEY Applicant Company name: Wuhan Ruobing Technology Co., Ltd Grantee code: 2BCNH FCC ID:

Contact Name: Rose Yang Address: No. 29, No. 1, 12th Floor, Jinning International Commercial Building, No. 336 Heping Avenue, Wuchang District Telephone No:

Fax No:

Email: jack5302@163.com 13729961005 N/A i. ii.

[Wuhan Ruobing Technology Co., Ltd] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification.

[Wuhan Ruobing Technology Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing covered equipment. The applicant must sign this certification.

[Wuhan Ruobing Technology Co., Ltd] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing coveredequipment . Date: 2023/9/1 Applicants Name: Rose Yang Title: manager Signature 1 The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist 1/1

Wuhan Ruobing Technology Co., Ltd Wuhan Ruobing Technology Co., Ltd Paw65 65key, Paw65key FCC ID2BCNH-65KEY 249 2410-

2475 247 2402-

2480 MHz

2M

@20db BW MHz

66 40 95.17 1.077@20db 1.652 0.6893@6db PCB Antenna@

1.2dBi PCB Antenna@

1.2dBi Offer numberFCS-23-893 Project number373631 23/36403316 DC 5V Hardware version number V1.0 Software version number V1.0 247 249 MPE FCS202308144W01 FCS202308144W02 FCC RF Exposure Flux Compliance Service Laboratory 514908

Wuhan Ruobing Technology Co., Ltd Product Similarity Declaration EUT Description:Paw65 Model No.: 65key,Paw65key FCC ID: 2BCNH-65KEY We (Wuhan Ruobing Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature:

Name:Rose yang Title: Manager Place, date:Aug 25, 2023

C5266091_X8_Ed.1 Letter of Authorization Wuhan Ruobing Technology Co., Ltd Company: Wuhan Ruobing Technology Co., Ltd Address: No. 29, No. 1, 12th Floor, Jinning International Commercial Building, No. 336 Heping Avenue, Wuchang District Product Name: Paw65 Model Number: 65key, Paw65key FCC Identifier: 2BCNH-65KEY We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Rose Yang Date: 2023.09.1 Title: manager Signature of applicant:

1/1

USA MEIHUA TRADING INCLETTER OF ATTESTATION TO;

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process:

Company Name: USA MEIHUA TRADING INC FRN:; 0033406166 Contact Name: Harley Quinn Address: 5379 Pine Valley Ct Boulder CO 80301 United States Telephone No: 1-312-363-9424 Emall: melhua-trading-Inc@foxmall.com Applicant:

Company name:Wuhan Ruobing Technology Co., Ltd Product Description: Paw65 Grantee code:2BCNH FCC ID:2BCNH-65KEY Contact Name:Rose Yang Address:No. 29, No. 1, 12th Floor, Jinning International Commercial Building, No. 336 Heping Avenue, Wuchang District Telephone No:13729961005 Email:jack5302@163.com

(Wuhan Ruobing Technology Co., Ltd] certifles that, as of the date of this filing of the application with the TCB, [USA MEIHUA TRADING INC] Is our designated US agent for service of process for the above referenced FCC ID, [Wuhan Ruobing Technology Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and Importation or the conclusion of any commission related proceeding Involving equipment. [USA MEIHUA TRADING INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process Is aware of and agrees to comply with the requirements outlined In the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant Is aware of and agrees to comply with the requirements outlined In the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. Date: 2023/08/24

| Applicant's Name:Rose Yang Title:Manager Signature Rose Yang US Agent Title: Manager Signature auenettitiny,, Re :

2. f .

Vennee ws a

\S e

i 3%

ON ee, i.

"4, 6, 1/1