FCC ID: 2AWHY-B0210 WUUK Base Station

WHAT'S INCLUDED For WUUK Base Station For WUUK Wireless Cam Pro WUUK Base Station Power Adapter WUUK Wireless Cam Pro Mounting Bracket Ethernet Cable Mounting Screws and Anchors Type C USB Charging Cable Accessories 1. Brand Home Protection Stickers 2. User Manual 3. Tips for Alexa and Google Home Connection

*Camera quantity and accessories vary by bundle package.

*Base Station's power adapter varies by region. Use either the backplate of the mounting bracket to mark the location, or use the provided locating sheet in order to drill holes. If you are installing on bered materials such as wood, particle-

board, you can directly install the backplate on using the screws provided. Anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco. In these cases, drill holes with a drill bit, then insert the anchors into the holes. Firmly screw the backplate of the mounting bracket onto the wall. Turning the mount bracket cover clockwise to lock the ball knob stick to the backplate, and adjust the angle according to your needs. WUUK Wireless Cam Pro Power on: Long press the Power button, until you hear the device announces "Hello, WUUK". Power off: Short press the power button 5 times, until the device makes 3 short beeping sounds. Entering pairing mode: When the device is on, long press the power button for 3 seconds, until the device makes a short beeping sound and the indicator light is ashing red. After the cameras are added to the WUUK Base Station, you can move to the next step "MOUNTING THE CAMERA". Power Up SAFETY STATEMENT FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

C5266091_X10_Ed.2 WUUK LABS CORP. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

Jan.11.2021 Subject: Request for Confidentiality FCC ID: 2AWHY-B0210 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ____45__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Yang xie Title: Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization WUUK LABS CORP. Company: WUUK LABS CORP. Address: 16192 COASTAL HWY, LEWES, DE 19958, US Product Name: WUUK Base Station Model Number: B0210 FCC Identifier: 2AWHY-B0210 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yang xie Title: Manager Date: Jan.11.2021 Signature of applicant:

1/1