Digital Video Transmission System USER MANUAL DVLC Wuxi R2TECKCo.,Ltd. Content 1. Easy way to start the device ................................................................................... 1 1.1 Operating steps and instructions ................................................................... 1 2. Specification ............................................................................................................ 3 3. Introduction ............................................................................................................. 4 3.1 Disclaimer ...................................................................................................... 4 3.2 Profile ............................................................................................................. 4 3.3 Intended usage .............................................................................................. 4 3.4 Caution .......................................................................................................... 4 4. Product overview .................................................................................................... 6 4.1 Brief introduction ............................................................................................ 6 4.2 Standard spec ................................................................................................ 6 5. Port definition .......................................................................................................... 8 5.1 Air system port ............................................................................................... 8 5.2 Ground system port ..................................................................................... 11 6. Installation ............................................................................................................. 14 6.1 Air system installation .................................................................................. 14 6.2 Ground system installation ........................................................................... 14 7. Bind ....................................................................................................................... 16 8. Troubles solution ................................................................................................... 17 8.1 Trouble symptoms / diagnosis / solution ...................................................... 17 9. Appendix ............................................................................................................... 19 9.1 Monitor OSD content ................................................................................... 19 10. Contact info ......................................................................................................... 20 1. Easy way to start the device 1.1 Operating steps and instructions 1.1.1 Air system
Install the antennas.
Install the MIPI camera.
Install the OSD cable (optional).
Install the TF card Support 4GB-64GB, FAT32 format, optional.
Connect air system to the power. There should be below instructions if the air system works well. POWERlightturn-on. CAMlight turn-on. REClight turn-on if the proper TF card has been inserted, and the recording function is turned on. LINK light turn-on if the air system connect to ground system. 1.1.2 Ground system
Install the antennas.
Install the monitor by HDMI cable. (optional)
Turn off the ground system power button, then connect to the power (battery of 12V-DC power), turn on the ground system power button again.
Turn on the power. There should be below instructions if the ground system works well. After 15 seconds of power on, the WORK light will display the breathing effect, and the WORK light will loop from on to off on display. HDMI light turn-on(if installed the HDMI monitor). LINK light turn-on if the air system connect to air system. HDMI monitor instruction (if installed the HDMI monitor). The monitor shows logo "R2TECK" after ground system connect to the power. After that, the monitor shows progress bar: Start-up / Selfcheck / Link. Monitor real-time display the camera video and OSD information(if OSD module has been assembled)when the air system connect to the ground system. 1.1.3 Mobile
The mobile connect the WIFI network whose name is the same as the device number, WIFI password is "12345688".
Wait for connecting.
Run the APP (if the APP is already running, turn off it first then run again).
The mobile real-time display the camera video, the MOBILE light on the ground system turn-on. 1 Attention: Currently only allow working one mobile, if want to change the mobile, please follow below process:
Disconnect the mobile with ground system wifi network. Wait ground system MOBILE light turn off. Repeat the above 4 steps. IOS App installation: In App store, search the key word r2teck and download. Figure1.1.3.1 Connection diagram Attention:When used the ground system is fixed on the ground,its not a portable device. 2 2. Specification Here list the detailed specification about DVLC , as shown in Table 2.1.1. Table 2.1.1List of Parameters Performance Parameter Communication distance
(outdoor, no obstruction) 100mw ground distance 800m 500mw ground distance 3000m (double distance in air) If change to the wide angel directional patch antenna, the distance will be double. Effective Radiated PowerEIRP 25mw~800mw adjustable Receiving sensitivity Operating frequency Physical Parameter Operating Temperature Storage Temperature
-95dbm2dbm 5200MHz Size(Include shell, no antenna) Weight (Include shell, no antenna) Hardware function support Air system Operating Voltage Ground system Operating voltage Air system: L.71mm W.51 mm H.19 mm Ground system: L.105 mm W.74 mm H.26 mm Air system: 70g Ground system: 174g DC-12V, Compatible with 2S~3S, average power consumption 5W, Max power consumption 12W DC-12V, Compatible with 2S~3S, average power consumption 5W, Max power consumption 12W
-10~60
-20~50 3 3. Introduction 3.1 Disclaimer Thanks for purchasing the DVLC from Wuxi R2TECK. Everyone need to read and understand this disclaimer before using the DVL1. You are supposed to be accepted the disclaimer once the product is started to use. Please comply with the installation and using process indicated in this use manual. Wuxi R2TECK will not be responsible for the consequence of the improper use, improper install, improper modify. The product name, brand mentioned here are belong to R2TECK. 3.2 Profile This user manual as the instruction of Full-HD Digital Video Transmission system DVLC, the components and functions mentioned here may not be the standard spec. please check the enclosed list with the product, please contact with the dealer if you have any question. The right of the manual write, modify and release only belong to Wuxi R2TECK, Without the authorization of Wuxi R2TECK, this use manual could not be copied or modified or released The information in this manual is only for DVLC Full-HD Digital Video Transmission System. This manual is subject to change without prior notice. Version profile code & version RR.H.0001. 0018. V01 release date August 2018 3.3 Intended usage DVLC use for wireless Full-HD Digital Video transmission. 3.4 Caution The effectiveness of DVLC use is subject to if comply with operate and maintain direction in this manual. Before operating the product, the staff must make sure the operate process and condition is correct. specially to check the product cables are good or not, if the cable is damaged, please change it before operating the product. 4 DVLC is intended to use on the UAV and other Full-HD digital video transmission. DVLC may not be reached the defined function if it works in the improper temperature, improper humidity and improver air pressure. DVLC should not work when it is wet. Have to make sure it is dry when you use it.It should be dried immediately at a ventilated place in case of accidentally wet. DVLC is the high precise product. NOBEATING, CLASHING OR KNOCKING. Product life time is 2 years, quality warranty is 1 year. Manufacture and dealer are responsible for the product maintenance, without the authorization, please don't fix the product and don't modify the product. 5 4. Product overview 4. Product overview 4.1 Brief introduction DVLC is the 1080p full-HD Digital Video transmission system which including air HD Digital Video transmission system which including air part and ground part, part and ground part, it transmit the video, image and more information by the wireless communication mode. DVL it transmit the video, image and more information by the wireless communication mode. DVL it transmit the video, image and more information by the wireless communication mode. DVLC is perfect for all fields video transmission because of the light weight, low power, long distance, low latency. Please for all fields video transmission because of the light weight, low power, long distance, low latency. Please for all fields video transmission because of the light weight, low power, long distance, low latency. Please install the air system on the aircraft, connect the ground system to the monitor or mobile phone to on the aircraft, connect the ground system to the monitor or mobile phone to on the aircraft, connect the ground system to the monitor or mobile phone to monitoring the video. 4.2 Standard spec 4.2.1 Product main part Air system x 1 Ground system x 1 Ground system antenna x 2 Camera x 1 Ground system mobile antenna x 2 x 2 6 4.2.2 Air system cable Air system power cable x 1 (standard) Air system power cable x 1 (standard) Air system power cable 12V 4.2.3 Ground system cable Power adapter x 1 (optional) Vehicle power 12V- DC for ground DC for ground system HDMI cable x 1 (optional) Monitor HDMI cabe Monitor x 1 (optional) For video receive and monitoring For video receive and monitoring Ground system tripod x 1 (optional) Ground system tripod x 1 (optional) Ground system tripod Extension tripod x 1 (standard) Extension bar Battery bin x 1 Directly charging the ground system Directly charging the ground system in battery bin.. 7 5. Port definition 5.1 Air system port 5.1.1 Back side Figure 5.1.1.1 schematic diagram of back side
[1]: REClight,mp4 video recording status light Light status Description Operation Turn-on Turn-off Flashing The recording function is on and the recording status is normal. The recording function is off. The recording function is on and the recording state is abnormal. NA NA Check whether the TF card has been inserted, or turn off the recording function toggle switch to reopen.
[2]:CAMlight,The camera is connected and the status of appropriate image data collection. Light status Turn-on Turn-off Operation Description The camera is connected and the image data collection is normal. The camera is not connected. Replug the camera cable. NA
[3]:LINKlight, Indicate the wireless connection status with the ground system. Light status Turn-on Turn-off Operation Description The wireless module is connected to the ground system. The wireless module is not 1. Please wait for connecting;
NA 8 connected to the ground system. 2.Make sure the air system is connected the power;
3.Bind the air system and ground system again;
4. Connect the power again.
[4]: POWERlight, Indicate the power supply state of the air system, and the description of each state is as follows. Light status Description Turn-on Turn-off No power supply. The power supply is normal. Operation Check whether the power supply is normal. NA
[5]: BIND button,For bind the air system and ground system. Press the button more than 5 seconds, 3 lights (REC, CAM, LINK) are all turn-off, then 3 lights flash one by one, when the LED light works well that means they are well bind.
[6]: FREQ-SW button,Reserved,Not support temporary.
[7]: STOP/REC video recording toggle switch mp4 format video recording toggle switch: turn off the recording function by toggling left (STOP), then the recording light of video turn off; turn on the recording function by toggling right (REC), which lights up/flashes the recording light.
[8]: TF-CARD slot 5.1.2 Left side port Figure 5.1.2.1Schematic diagram of left side port
[1]: MIPI camera port,Connect with MIPI camera, and get video data of the camera via this port. 9
[2]: OSD port,When it is necessary to display the OSD information of the flight control system, connect to the data line port of the flight control system for reading OSD information. 5.1.3 Right side port Figure 5.1.3.1 Schematic diagram of right side port
[1]: OSD port,When it is necessary to display the OSD information of the flight control system, connect to the data line port of the flight control system for reading OSD information.
[2]: POWER port,For air system get the power DC-12 V or 2S~3S from the aircraft. 5.1.4 Top side port 1080P/720P Figure 5.1.4.1 Schematic diagram of top side port
[1]: 1080p /720p toggle switch,Toggle left to 1080p and right to 720p. 10 5.2 Ground system port 5.2.1 Bottom side port Figure 5.2.1.1 schematic diagram of bottom side port
[1]: Battery port, For connect with 2S/3S battery.
[2]: Fix hole, For fix the ground system on the tripod.
[3]: DC power port, For ground system to connect with the DC power, suggest output power is more than 1A. 5.2.2 Left side port Figure 5.2.1.1 schematic diagram of left side port
[1]: Bind button,For bind the air system and ground system. Press the button more than 5 seconds, 4 lights (HDMI, LINK, OSD, WORK) are all turn-off, then 4 lights flash one by one, when the LED light works well that means they are well bind.
[2]: Work light,For monitor the ground system working status. Light status Flash regularly Description The ground system works well. Action NA 11 Other status The ground system does not The ground system does not work. Connect the system to the Connect the system to the power again, or contact with power again, or contact with the customer service.
[3]:Link light,For monitor the status of connect with the monitor the status of connect with the air system. Light status Turn-on Description Description Connect with Connect with air system well Turn-off Does not connect with Does not connect with system air Action NA 1. Please wait for connecting 1. Please wait for connecting;
2.Make sure the ground 2.Make sure the ground system is power;
3. Bind the air system and 3. Bind the air system and ground system again;
4. Connect the power again 4. Connect the power again. connected the connected the
[4]: HDMI light,For monitor the camera status. or monitor the camera status. Light status Turn-on Turn-off Description Description Camera connect well. Camera connect well. Camera does not connect. Camera does not connect. Action NA Check camera cable position. camera cable position.
[5]: MOBILE light, For monitor the status of connect with the mobile For monitor the status of connect with the mobile device(iPhoneiPad). iPad). Light status Turn-on Description Description Connect with mobile Connect with mobile well. Action device NA Turn-off Does not connect with Does not connect with mobile device. Make sure that the mobile Make sure that the mobile device is connected to the device is connected to the ground system network. Close network. Close the background software and the background software and reopen it. 5.2.3 Right side port Figure 5.2.3.1 schematic diagram of right side port Figure 5.2.3.1 schematic diagram of right side port
[1]: Power button, ON (the system connect the power), OFF (the system without the power)
[1]: Power button, ON (the system connect the power), OFF (the system without the power)
[2]: HDMI port, For connect with the monitor. or connect with the monitor.
[3]: USB port, For firmware Update. 12 5.2.4 Front side port Figure 5.2.4.1 schematic diagram of front side port Figure 5.2.4.1 schematic diagram of front side port
[1]: Air vent: Pay attention to not cover the Air vent: Pay attention to not cover the air vent. 13 6. Installation 6.1 Air system installation 6.1.1 Antenna installation
Take out two pcs air system antenna.
Install them on the air system antenna holes, when you hear a clicking sound indicates completion of installation. Attention: For better transmit result, please make sure the antenna be away from the metal and carbon fiber frame, avoid being blocked by the main body of the aircraft or batteries, antenna should be vertical to the ground. Figure 6.1.1.1 schematic diagram of air system antenna installation 6.1.2 MIPI camera installation Connect one end of the MIPI cable to the camera and the other end to the MIPI port of the air system. 6.1.3 Power cable installation one end with terminals of the cable connect with air system power port, another end of cable connect with power 12V-DC, the red cable is positive, the black is negative. 6.2 Ground system installation 6.2.1 Antennas installation Prepared 4pcs ground system antennas, 2pcs of each style, fix them on the ground system according the photo below:
14 Figure 6.2.1.1 schematic diagram of ground system antenna installation schematic diagram of ground system antenna installation 6.2.2 HDMI cable installation One end of HDMI connect to the monitor, the other end of HDMI connect to the ground system. One end of HDMI connect to the monitor, the other end of HDMI connect to the ground system. One end of HDMI connect to the monitor, the other end of HDMI connect to the ground system. 6.2.3 Power cable installation Both of DC and AC power are supported by the ground system. Both of DC and AC power are supported by the ground system. Support 2s-3s model battery Support 12V-DC power, suggest th Connect to the power according to the requirement. Connect to the power according to the requirement. suggest the output power is more than 1A. 15 7. Bind Function description: Restores the device to factory settings, bind one air system with one ground system and gives the pairthe matching ID code. Operation method: the device LED light shows correctly, press two BIND buttons on air system and ground system together and keep more than 5 seconds, all the LED light turn off, release the button. All the LED light flash one by one regularly, means the device start the bind progress. when all the LED lights of both sides shows correctly that means bind progress is finished. Attention:When the air system is connecting with the ground system, the video will be paused two times during the bind progress, the video will work correctly when the progress is finished. 16 8. Troubles solution Below is the device maintenances about DVLC, to help the users whom don't have professional testing device and technology to solve the simply troubles. 8.1 Trouble symptoms / diagnosis / solution Table 8.1.1Troublediagnosis and solution Symptoms Diagnosis Solution Did not follow the process Air system Ground system REC light flash CAM light turn-off POWER light turn-off LINK light turn-off HDMI light turn-off WORK light is abnormal (not flash regularly) LINK light turn-off No video Bind abnormal LINK light turn-off Blue screen Air system HDMI bad contact 17 Follow the process as chapter 1. Insert the TF card first and turn on the video recording function. If you have inserted the TF card, you need to turn off the video recording function and open it again. Make sure the TF card format is FAT32. MIPI cable is bad contacted, connect the MIPI cable again. Battery is dead. Replace the battery and connect the power again. Connect the power again. Camera HDMI cable is bad connected, connect the HDMI cable again. Connect the power again. Connect the power again. If the above solutions do not work, please restore factory setting Restore factory setting succeed, suggest to process the bind progress. Action and instruction as chapter 7. Please make sure HDMI cable works and connect with the device well. Video pause HDMI cable problem Out of allowed distance Change a new HDMI cable. Back to the allowed distance. OSD cable is bad connected. Reconnect OSD cable of the ground system. OSD display abnormal Flight control battery voltage VT not accurate If the above solutions do not work, please contact with the customer service. Power supply is uncalibrated. Calibrate the flight control power voltage in the ground station software in advance. 18 9 9. Appendix 9.1 Monitor OSD content Beside the video, on the top side and bottom side of the monitor display the OSD data. Beside the video, on the top side and bottom side of the monitor display the OSD data. Beside the video, on the top side and bottom side of the monitor display the OSD data. SP: Video signal intensity VOLT: Voltage of Transmitter PW: Transmitting power FREQ: Frequency H: Hight of Transmitter Lat: Latitude of Transmitter Lng: Longitude of Transmitter D: The actual flight distance of the drone The actual flight distance of the drone (unit: m) Number of satellites 19 10. Contact info Thanks for purchasing our device again. If you have any suggestion or need technical support, please visit our website or send us the email, also welcome to call us. AddressRoom307,Building of Cetus,Wuxi software park,111th Linghuavenue,new Wuxi R2TECK Co., Ltd district ,Wuxi city,Jiangsu Province P.C.214000 Tel0510-81012344 Fax0510-81012344 Webhttp://www.gor2teck.com Emailsales1@gor2teck.com 20