FCC ID: 2AUIUWLPST4 Wyze Light Strip

Wyze Light Strip Pro 10M full on rave in your living room, you have made a great choice. Now outlet and the desired location of the strips. Note: the controller will into place. Repeat for the second strip. 12V Dout GND 12V Din GND Open the Wyze app and tap the + sign on the top left corner of 2 Clean the desired strip mounting location with the included alcohol 5 Trimming the Strip: The strip can be cut to a desired length at the the Home tab. Tap Add Device and then select Wyze Light Strip Pro. wipe and allow to dry. designated marks. Make sure the power adapter is unplugged before Select and clean the controllers mounting location using an 3 Connect the strips to the controller and begin mounting them 6 cutting. included alcohol wipe. Make sure the controller can reach both an one at a time by exposing the adhesive back and pressing the strip go in the middle and connect to each of the two strips. Do not try to Corner Installation: If installing at a 90 angle (e.g, around the back of connect the two strips together with the controller at one end, it a TV) make a loop with the strip and reinforce each side with the must be in the middle. included clips. Try to avoid bending the strip where the LED is located. CAUTION Do not leave the device on while coiled as it may overheat. Avoid bending the strip where an LED is located as it may damage the product. Do not cut the device while it is plugged into power. Only mount the device onto dry, clean, and smooth surfaces. For indoor use only. Do not use if the power cord is damaged. WELCOME TO WYZE Well, hello there! If this is your rst Wyze product, welcome to the Wyze family! Whether you bought Wyze Light Strip Pro to add accent lighting behind your TV, step up your TikTok game, or have a lets get started!

IN THE BOX Wyze Light Strip Pro 2 Adhesive Clips 20 Power Adapter 1 Alcohol Wipe 4 Quick Start Guide 1 SETUP Download the Wyze app and sign in or create an account. 1 Controller Power adapter Light strip Uncover the controllers adhesive backing and rmly press the 4 controller into place. Make sure the front and side buttons are accessible after mounting. Use the included clips to reinforce the strip. Use extras around 7 corners or where the strip bends. BASIC OPERATIONS Indicator Light Front Button Side Button Plug the power adapter into the wall and conrm the strip is 8 pulsing blue. If it is not, press and hold the side button for 7 seconds until the LED on the controller begins ashing blue and yellow. If the strip doesnt turn on, make sure all the connections are secure. Follow the instructions in the Wyze app to nish pairing the 9 Front Button Change Color Power On/Off device to your Wyze account. Side Button Toggle Mode Enter Pairing Mode SINGLE PRESS LONG PRESS CONTROLLER STATUS LIGHT GUIDE Flashing blue & yellow In pairing mode Flashing blue Connect to Wyze cloud or offline Solid blue Light strip is on Off Light strip is off 3 Once enabled, follow the on-screen instructions to link your Wyze account to Alexa. You will be prompted to enter your Wyze username and password to authorize Alexa to access your camera. 4 Select Add Device so that Alexa can nd your device. You can also say, Discover my devices. After Alexa nds your device, its listed under Devices in the Smart Home section of the Alexa app. Google Assistant Download and congure the Home app by Google. CONNECTING TO YOUR VOICE ASSISTANT To control your device with your voice, connect your Wyze account to Alexa or Google Assistant. Alexa 1 Open up the Wyze app, go into your Account settings, then tap on Smart Integrations to link Alexa to your Wyze account. 2 You can also link your Wyze account by asking Alexa to Enable Wyze skill. If you have not downloaded the Alexa app you can download it from the App Store or Google Play store or go to alexa.amazon.com to search for and enable the Wyze skill. 1 2 3 4 5 6 7 Launch the Home app. Tap Add. Tap Set up device. Tap Works with Google. Find the Wyze Home listing and log in with your Wyze account. Google Assistant will automatically sync and populate a list of the devices from your Wyze account. FCC WARNING Any changes or modications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. ISEDC RSS WARNING This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user's authority to operate the equipment. This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet appareil est conforme la aux normes RSS de l'Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer des interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Le fabricant n'est pas responsable des toutes interfrences radio ou tlvision causes par des modications non autorises apportes cet appareil. De telles modications peuvent empcher l'utilisateur d'utiliser l'appareil. Le prsent metteur radio (identier le dispositif par son numro de certication ou son numro de modle s'il fait partie du matriel de catgorieII) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. ISEDC RADIATION EXPOSURE STATEMENT This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet quipement est conforme aux limites de radiations dnies par IC dans le cadre d'un environnement non contrl. Cet quipement doit tre install et fonctionner une distance minimum de 20 cm de votre corps. NEED HELP?

Contact our Support Team at:

https://support.wyze.com Join our Community:

https://wyze.com/community Scan the QR code to learn more Wyze Light Strip Pro 5M WELCOME TO WYZE Well, hello there! If this is your rst Wyze product, welcome to the Open the Wyze app and tap the + sign on the top left corner of 2 Clean the desired strip mounting location with the included alcohol 5 Trimming the Strip: The strip can be cut to a desired length at the the Home tab. Tap Add Device and then select Wyze Light Strip Pro. wipe and allow to dry. designated marks. Make sure the power adapter is unplugged before Wyze family! Whether you bought Wyze Light Strip Pro to add Select and clean the controllers mounting location using an 3 accent lighting behind your TV, step up your TikTok game, or have a full on rave in your living room, you have made a great choice. Now included alcohol wipe. Make sure the controller can reach both an outlet and the desired location of the strip. lets get started!

Connect the strip to the controller and begin mounting the strip 6 cutting. by exposing the adhesive back and pressing the strip into place. Corner Installation: If installing at a 90 angle (e.g, around the back of a TV) make a loop with the strip and reinforce each side with the included clips. Try to avoid bending the strip where the LED is located. 12V Dout GND 12V Din GND CAUTION Do not leave the device on while coiled as it may overheat. Avoid bending the strip where an LED is located as it may damage the product. Do not cut the device while it is plugged into power. Only mount the device onto dry, clean, and smooth surfaces. For indoor use only. Do not use if the power cord is damaged. IN THE BOX Wyze Light Strip Pro 1 Adhesive Clips 10 Power Adapter 1 Alcohol Wipe 2 Quick Start Guide 1 SETUP Download the Wyze app and sign in or create an account. 1 Power adapter Controller Light strip Uncover the controllers adhesive backing and rmly press the 4 controller into place. Make sure the front and side buttons are accessible after mounting. Use the included clips to reinforce the strip. Use extras around 7 corners or where the strip bends. BASIC OPERATIONS Indicator Light Front Button Side Button Plug the power adapter into the wall and conrm the strip is 8 pulsing blue. If it is not, press and hold the side button for 7 seconds until the LED on the controller begins ashing blue and yellow. If the strip doesnt turn on, make sure all the connections are secure. Follow the instructions in the Wyze app to nish pairing the 9 Front Button Change Color Power On/Off device to your Wyze account. Side Button Toggle Mode Enter Pairing Mode SINGLE PRESS LONG PRESS CONTROLLER STATUS LIGHT GUIDE Flashing blue & yellow In pairing mode Flashing blue Connect to Wyze cloud or offline Solid blue Light strip is on Off Light strip is off 3 Once enabled, follow the on-screen instructions to link your Wyze account to Alexa. You will be prompted to enter your Wyze username and password to authorize Alexa to access your camera. 4 Select Add Device so that Alexa can nd your device. You can also say, Discover my devices. After Alexa nds your device, its listed under Devices in the Smart Home section of the Alexa app. Google Assistant Download and congure the Home app by Google. CONNECTING TO YOUR VOICE ASSISTANT To control your device with your voice, connect your Wyze account to Alexa or Google Assistant. Alexa 1 Open up the Wyze app, go into your Account settings, then tap on Smart Integrations to link Alexa to your Wyze account. 2 You can also link your Wyze account by asking Alexa to Enable Wyze skill. If you have not downloaded the Alexa app you can download it from the App Store or Google Play store or go to alexa.amazon.com to search for and enable the Wyze skill. 1 2 3 4 5 6 7 Launch the Home app. Tap Add. Tap Set up device. Tap Works with Google. Find the Wyze Home listing and log in with your Wyze account. Google Assistant will automatically sync and populate a list of the devices from your Wyze account. FCC WARNING Any changes or modications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. ISEDC RSS WARNING This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user's authority to operate the equipment. This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet appareil est conforme la aux normes RSS de l'Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer des interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Le fabricant n'est pas responsable des toutes interfrences radio ou tlvision causes par des modications non autorises apportes cet appareil. De telles modications peuvent empcher l'utilisateur d'utiliser l'appareil. Le prsent metteur radio (identier le dispositif par son numro de certication ou son numro de modle s'il fait partie du matriel de catgorieII) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. ISEDC RADIATION EXPOSURE STATEMENT This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet quipement est conforme aux limites de radiations dnies par IC dans le cadre d'un environnement non contrl. Cet quipement doit tre install et fonctionner une distance minimum de 20 cm de votre corps. NEED HELP?

Contact our Support Team at:

https://support.wyze.com Join our Community:

https://wyze.com/community Scan the QR code to learn more Wyze Light Strip 10M rave in your living room, you have made a great choice. Now lets outlet and the desired location of the strips. Note: the controller will into place. Repeat for the second strip.

+12V GREEN RED ELUE

+12V GREEN RED ELUE Open the Wyze app and tap the + sign on the top left corner of 2 Clean the desired strip mounting location with the included alcohol 5 Trimming the Strip: The strip can be cut to a desired length at the the Home tab. Tap Add Device and then select Wyze Light Strip. wipe and allow to dry. designated marks. Make sure the power adapter is unplugged before Select and clean the controllers mounting location using an 3 Connect the strips to the controller and begin mounting them 6 cutting. included alcohol wipe. Make sure the controller can reach both an one at a time by exposing the adhesive back and pressing the strip go in the middle and connect to each of the two strips. Do not try to Corner Installation: If installing at a 90 angle (e.g, around the back of connect the two strips together with the controller at one end, it a TV) make a loop with the strip and reinforce each side with the must be in the middle. included clips. Try to avoid bending the strip where the LED is located. CAUTION Do not leave the device on while coiled as it may overheat. Avoid bending the strip where an LED is located as it may damage the product. Do not cut the device while it is plugged into power. Only mount the device onto dry, clean, and smooth surfaces. For indoor use only. Do not use if the power cord is damaged. WELCOME TO WYZE Well, hello there! If this is your rst Wyze product, welcome to the Wyze family! Whether you bought Wyze Light Strip to add accent lighting behind your TV, step up your TikTok game, or have a full on get started!

IN THE BOX Wyze Light Strip 2 Adhesive Clips 20 Power Adapter 1 Alcohol Wipe 4 Quick Start Guide 1 SETUP Download the Wyze app and sign in or create an account. 1 Controller Power adapter Light strip Uncover the controllers adhesive backing and rmly press the 4 controller into place. Make sure the front and side buttons are accessible after mounting. Use the included clips to reinforce the strip. Use extras around 7 corners or where the strip bends. BASIC OPERATIONS Indicator Light Front Button Side Button Plug the power adapter into the wall and conrm the strip is 8 pulsing blue. If it is not, press and hold the side button for 7 seconds until the LED on the controller begins ashing blue and yellow. If the strip doesnt turn on, make sure all the connections are secure. Follow the instructions in the Wyze app to nish pairing the 9 Front Button Change Color Power On/Off device to your Wyze account. Side Button Toggle Mode Enter Pairing Mode SINGLE PRESS LONG PRESS CONTROLLER STATUS LIGHT GUIDE Flashing blue & yellow In pairing mode Flashing blue Connect to Wyze cloud or offline Solid blue Light strip is on Off Light strip is off 3 Once enabled, follow the on-screen instructions to link your Wyze account to Alexa. You will be prompted to enter your Wyze username and password to authorize Alexa to access your camera. 4 Select Add Device so that Alexa can nd your device. You can also say, Discover my devices. After Alexa nds your device, its listed under Devices in the Smart Home section of the Alexa app. Google Assistant Download and congure the Home app by Google. CONNECTING TO YOUR VOICE ASSISTANT To control your device with your voice, connect your Wyze account to Alexa or Google Assistant. Alexa 1 Open up the Wyze app, go into your Account settings, then tap on Smart Integrations to link Alexa to your Wyze account. 2 You can also link your Wyze account by asking Alexa to Enable Wyze skill. If you have not downloaded the Alexa app you can download it from the App Store or Google Play store or go to alexa.amazon.com to search for and enable the Wyze skill. 1 2 3 4 5 6 7 Launch the Home app. Tap Add. Tap Set up device. Tap Works with Google. Find the Wyze Home listing and log in with your Wyze account. Google Assistant will automatically sync and populate a list of the devices from your Wyze account. FCC WARNING Any changes or modications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. ISEDC RSS WARNING This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user's authority to operate the equipment. This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet appareil est conforme la aux normes RSS de l'Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer des interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Le fabricant n'est pas responsable des toutes interfrences radio ou tlvision causes par des modications non autorises apportes cet appareil. De telles modications peuvent empcher l'utilisateur d'utiliser l'appareil. Le prsent metteur radio (identier le dispositif par son numro de certication ou son numro de modle s'il fait partie du matriel de catgorieII) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. ISEDC RADIATION EXPOSURE STATEMENT This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet quipement est conforme aux limites de radiations dnies par IC dans le cadre d'un environnement non contrl. Cet quipement doit tre install et fonctionner une distance minimum de 20 cm de votre corps. NEED HELP?

Contact our Support Team at:

https://support.wyze.com Join our Community:

https://wyze.com/community Scan the QR code to learn more Wyze Light Strip 5M WELCOME TO WYZE Well, hello there! If this is your rst Wyze product, welcome to the Open the Wyze app and tap the + sign on the top left corner of 2 Clean the desired strip mounting location with the included alcohol 5 Trimming the Strip: The strip can be cut to a desired length at the the Home tab. Tap Add Device and then select Wyze Light Strip. wipe and allow to dry. designated marks. Make sure the power adapter is unplugged before Wyze family! Whether you bought Wyze Light Strip to add accent Select and clean the controllers mounting location using an 3 lighting behind your TV, step up your TikTok game, or have a full on rave in your living room, you have made a great choice. Now lets included alcohol wipe. Make sure the controller can reach both an outlet and the desired location of the strip. get started!

Connect the strip to the controller and begin mounting the strip 6 cutting. by exposing the adhesive back and pressing the strip into place. Corner Installation: If installing at a 90 angle (e.g, around the back of a TV) make a loop with the strip and reinforce each side with the included clips. Try to avoid bending the strip where the LED is located.

+12V GREEN RED ELUE

+12V GREEN RED ELUE CAUTION Do not leave the device on while coiled as it may overheat. Avoid bending the strip where an LED is located as it may damage the product. Do not cut the device while it is plugged into power. Only mount the device onto dry, clean, and smooth surfaces. For indoor use only. Do not use if the power cord is damaged. IN THE BOX Wyze Light Strip 1 Adhesive Clips 10 Power Adapter 1 Alcohol Wipe 2 Quick Start Guide 1 SETUP Download the Wyze app and sign in or create an account. 1 Power adapter Controller Light strip Uncover the controllers adhesive backing and rmly press the 4 controller into place. Make sure the front and side buttons are accessible after mounting. Use the included clips to reinforce the strip. Use extras around 7 corners or where the strip bends. BASIC OPERATIONS Indicator Light Front Button Side Button Plug the power adapter into the wall and conrm the strip is 8 pulsing blue. If it is not, press and hold the side button for 7 seconds until the LED on the controller begins ashing blue and yellow. If the strip doesnt turn on, make sure all the connections are secure. Follow the instructions in the Wyze app to nish pairing the 9 Front Button Change Color Power On/Off device to your Wyze account. Side Button Toggle Mode Enter Pairing Mode SINGLE PRESS LONG PRESS CONTROLLER STATUS LIGHT GUIDE Flashing blue & yellow In pairing mode Flashing blue Connect to Wyze cloud or offline Solid blue Light strip is on Off Light strip is off 3 Once enabled, follow the on-screen instructions to link your Wyze account to Alexa. You will be prompted to enter your Wyze username and password to authorize Alexa to access your camera. 4 Select Add Device so that Alexa can nd your device. You can also say, Discover my devices. After Alexa nds your device, its listed under Devices in the Smart Home section of the Alexa app. Google Assistant Download and congure the Home app by Google. CONNECTING TO YOUR VOICE ASSISTANT To control your device with your voice, connect your Wyze account to Alexa or Google Assistant. Alexa 1 Open up the Wyze app, go into your Account settings, then tap on Smart Integrations to link Alexa to your Wyze account. 2 You can also link your Wyze account by asking Alexa to Enable Wyze skill. If you have not downloaded the Alexa app you can download it from the App Store or Google Play store or go to alexa.amazon.com to search for and enable the Wyze skill. 1 2 3 4 5 6 7 Launch the Home app. Tap Add. Tap Set up device. Tap Works with Google. Find the Wyze Home listing and log in with your Wyze account. Google Assistant will automatically sync and populate a list of the devices from your Wyze account. FCC WARNING Any changes or modications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. ISEDC RSS WARNING This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications or change to this equipment. Such modications or change could void the user's authority to operate the equipment. This radio transmitter (identify the device by certication number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Cet appareil est conforme la aux normes RSS de l'Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer des interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Le fabricant n'est pas responsable des toutes interfrences radio ou tlvision causes par des modications non autorises apportes cet appareil. De telles modications peuvent empcher l'utilisateur d'utiliser l'appareil. Le prsent metteur radio (identier le dispositif par son numro de certication ou son numro de modle s'il fait partie du matriel de catgorieII) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. ISEDC RADIATION EXPOSURE STATEMENT This equipment complies with ISED RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Cet quipement est conforme aux limites de radiations dnies par IC dans le cadre d'un environnement non contrl. Cet quipement doit tre install et fonctionner une distance minimum de 20 cm de votre corps. NEED HELP?

Contact our Support Team at:

https://support.wyze.com Join our Community:

https://wyze.com/community Scan the QR code to learn more

Wyze Labs, Inc. Agent Authorization Company: Wyze Labs, Inc. Address: 5808 Lake Washington Blvd NE Ste 300,Kirkland,WA,United States Product Name: Wyze Light Strip Model Number(s): WLPSTG-5,WLPSTG-10,WLPSTPR-5,WLPSTPR-10 Product Description: Wyze Light Strip We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2021.07.26 Name:

Steve Skeoch Title:

Head of Hardware Company: Wyze Labs, Inc.

Differences Description

We Wyze Labs, Inc. state:

Product： Wyze Light Strip

Model Name：

WLPSTG-5,

WLPSTG-10,

WLPSTPR-5,

WLPSTPR-10

Brand Name： WYZE

FCC ID： 2AUIUWLPST4

IC： 25466-WLPST4

Model name

Power Adapter

LED strips

WLPSTG-5

GA-1201500

WLPSTG-10 GA-0361203000

WLPSTPR-5

GA-1202000

WLPSTPR-10 GA-0481204000

Same

Same

1pcs 5m

strip

2pcs 5m

strips

1pcs 5m

strip

2pcs 5m

strips

Controller

Circuit

schematic &

Layout

PWM output

control

Same

Triode control

IC control

Sincerely,

Company: Wyze Labs, Inc.

Title: Head of Hardware

E-mail: sskeoch@wyze.com

Name: Steve Skeoch

Signature:

Wyze Labs, Inc.

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

USA

Date: 2021.07.26

Subject; Request for Confidentiality

FCC ID: 2AUIUWLPST4

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we

are requesting the Commission to withhold the following attachment(s) as confidential

documents from public disclosure indefinitely.

These documents contain detailed system and equipment descriptions and are considered as

proprietary information in operation of the equipment. The public disclosure of these documents

might be harmful to our company and would give competitors an unfair advantage in the market.

Schematic Diagram

Block Diagram

Parts List

Operational Description

Tune-up Procedure

External Photos

Test Setup Photos

Internal Photos

User Manual

In additional to above mentioned documents, in order to comply with the marketing regulations

in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that

business sensitive information remains confidential until the actual marketing of newly

authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR

For 45 days, pursuant to Public Notice DA 04-1705.

For 180 days pursuant to KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of equipment

authorization is issued.

Sincerely,

Signature:

Name: Steve Skeoch

Title: Head of Hardware