FCC ID: 2AUIUWWGH1 Wyze Wireless Gaming Headset

105mm 105mm CALL CONTROLS Mute Button Multi-Function Button (MFB) 1S Phone Controls To answer/end a call

- Press the MFB button once. To reject a call

- Press and hold the MFB button for 1 second. To mute the microphone

- During the call, press the mute button to mute your mic. To unmute your mic, press the mute button again. IN THE BOX Wyze Wireless Gaming Headset 1 Boom Mic 1 Mic Foam Cover 1 USB Dongle 1 USB Type-C Cable 1 Quick Start Guide 1 WARRANTY 12-month limited warranty. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wyze labs, Inc. is under license. Other trademarks and trade names are those of their respective owners. Select mobile devices requires iOS 14.0+, Android 7.0+. Disclaimer: The products, accessories, user interfaces, etc. illustrated in this guide are intended for reference only. Due to product updates, the actual product and the illustrations in this guide may vary. TROUBLESHOOTING Cannot connect via Bluetooth:

- Factory reset the headset, then try to pair via Bluetooth again. Cannot connect to USB dongle:

- Factory reset the headset, then plug the USB dongle in again. WARNINGS 1) DO NOT use your headset while driving. 2) DO NOT use the headset at any time the inability to hear surrounding sounds may present a danger to yourself or others, construction site or railroad, etc., and follow applicable laws regarding headphone use. 3) DO NOT use the headset if it emits any loud or unusual noises. 4) Remove the headset immediately if you experience a warming sensation or loss of audio. 5) DO NOT use mobile phone adapters to connect the headset to an airplane seat jack, as this could result in injury or damage due to overheating. 6) DO NOT use the gaming headset as aviation communication headset except in case of emergency. 7) Contains small parts, which may be a choking hazard for children under 3. Power Button Volume Wheel Headset Boom Mic Mic Foam Cover Multi-Function Button (MFB) Mute Button QSG Press the power button for 1 second to turn on the headset. The red LED will turn on. BASIC OPERATION You can connect via Bluetooth and Bluetooth LE. Bluetooth Pairing With the headset turned on, press the MFB button for 3.5 seconds to enter Bluetooth pairing mode. The headset will prompt Bluetooth pairing, the LED will ash blue while pairing, and turn solid blue when paired. Bluetooth LE Pairing Plug the USB dongle into the USB port on your device. The headset will prompt Bluetooth pairing, and the LED on the headset will turn white when paired. To pair the headset with a new USB dongle, press the power button 5 times to enter USB dongle pairing mode. Checking the Battery Life To check the headsets battery life, press the power button once while the headset is turned on. A voice prompt will announce the battery level. of no activity or no media playing. Charging To charge the headset, plug a USB-C cable into the USB-C port on the headset. The LED will ash red while charging. Once the headset is fully charged, the red LED will turn solid. Note: If the headset battery level is below 10%, the headset will prompt Battery low. Volume Wheel Multi-Function Button (MFB) Power Button Switching Between Bluetooth and LE Mode To switch between Bluetooth and LE mode, press the MFB button twice. The LED status light is blue in Bluetooth mode, and white in LE mode. Bluetooth LE mode will not activate if the USB dongle is not plugged in. Factory Reset To factory reset the headset and clear the Bluetooth pairing Play/Pause Press the MFB button once to play or pause audio. seconds. Then, press and hold the power button for 15 seconds. The headset will prompt Factory reset when complete. Volume Turn the volume wheel to adjust the volume level. USB Dongle USB Type-C Cable Quick Start Guide 8) This product contains magnetic materials. Consult your device. 9) To reduce the risk of re or electrical shock, DO NOT expose this product to rain, liquids or moisture. 10) DO NOT expose this product to dripping or splashing liquids, and do not place objects lled with liquids, such as vases, on or near the product. 11) DO NOT make unauthorized alterations to this product. 12) Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CASA, VDE, CCC). 13) DO NOT expose products containing batteries to excessive heat (e.g. storage in direct sunlight, hot surfaces, or re). 14) DO NOT wear the headset while charging. 15) The gaming headset does not play audio while charging. 16) To avoid hearing damage, use your headset at a comfortable, moderate volume level. TROUBLESHOOTING Cannot connect via Bluetooth:

- Factory reset the headset, then try to pair via Bluetooth again. Cannot connect to USB dongle:

- Factory reset the headset, then plug the USB dongle in again. FCC WARNING Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver. which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. US Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mmbetween the radiator and the head. ISED Compliance Statements This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

(1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Canada Radiation Exposure Statement This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is measured at a distance of 0mmbetween the radiator and the head. Cet quipement est conforme aux limites d'exposition aux rayonnements de l'ised pour les environnements non contrls. L'utilisateur nal doit se conformer des instructions d'exploitation spciques an de respecter la conformit l'exposition aux radiofrquences. L'metteur ne doit pas tre au mme endroit qu'une autre antenne ou un autre metteur et ne doit pas fonctionner avec une autre antenne ou un autre metteur. Le dispositif portatif est conu pour rpondre aux exigences dexposition aux ondes radio tablie par le dveloppement nergtique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus leve est mesure une distance de 0mmentre le radiateur et le tte. CAUTION Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas;

a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas. SPECIFICATIONS Product Name: Wyze Wireless Gaming Headset Model: WWGH1-FWWGH1-L Product Size: 203.2 mm x 159.4 mm x 90.8 mm Product Weight: 235 g Power: 600mAh DC 3.7V Compatibility: Android 7.0+, iOS 14.0+

Operating Temperature: 32F - 104F (0C - 40C) Operating Humidity: 85%RH Storage & Transport Temperature: -4F- 140F (-20C - 60C) Storage & Transport Humidity: 95%RH FCC ID: 2AUIUWWGH1 IC: 25466-WWGH1 Product Name: Wyze Wireless Gaming Dongle Model: WWGH1USB Product Size: 50.8 mm x 17.0 mm x 7.6 mm Product Weight: 5 g Power: Computer USB port (5V) Compatibility: Windows OS, Mac OS Operating Temperature: 32F - 104F (0C - 40C) Operating Humidity: 85%RH Storage & Transport Temperature: -4F - 140F (-20C - 60C) Storage & Transport Humidity: 95%RH FCC ID: 2AUIUWWGH1USB IC: 25466-WWGH1USB NEED HELP?

Contact our Support Team:

https://wyze.com/support Join the Community:

https://wyze.com/community Scan the QR code to learn more Wyze and Wyze Wireless Gaming Headset are trademarks of Wyze Labs, Inc. Apple logo and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Google Assistant, Google Home, Google Play, and the Google Play logo are trademarks of Google LLC.

Wyze Labs, Inc. Date: 05/07/2022 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AUIUWWGH1 To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Winkey Wang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wyze Labs, Inc. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature:

On behalf of Company: Wyze Labs, Inc. Telephone: 8617600404714 E-mail: roy.zhang@wyze.cn

Wyze Labs, Inc. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding:

Confidentiality Request regarding application for FCC ID: 2AUIUWWGH1 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Tune-up Procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User Manuals Sincerely, Print Name: Roy Zhang Title: Certification Senior Manager Signature:

On behalf of Company: Wyze Labs, Inc. Telephone: 8617600404714 E-mail: roy.zhang@wyze.cn

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Wyze Labs, Inc. Address Grantee Code FCC ID 5808 Lake Washington Blvd NE Ste 300 Kirkland Washington 98033, United States 2AUIU 2AUIUWWGH1 Authorized Contact Name Roy Zhang Contact Email Contact Phone roy.zhang@wyze.cn 8617600404714 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date: 05/07/2022 Print Name:

Roy Zhang Title:

Certification Senior Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0