FCC ID: 2AU4DDCD Self-Cleaning Cat Litter Box

Product Manual Automatic cat litter box The picture is for reference only, please refer to the actual product!. Please read the instruction manual carefully before using product. 1 Precautions Table of Content 2 Packing List 3 Instructions 4 Usage of APP 5 Cleaning and Maintenance 6 Common Failures and Troubleshooting Methods 1. Precautions This product should be placed and used indoors or similar environment. It should be placed on flat ground or wooden ground. When transporting the product without package, please do not drag it without leaving the ground and handle it carefully, otherwise the weight sensor will be damaged. The cats weight should be 2.2LB - 22LB. There is a magnet installed on the front of this product. Be patient with pacemakers or related materials should consult their physicians before using this product. 2. Packing List Host 1 Special garbage bag (gift) 1 Power supply adapter 1 Manual 1 3. main technical index product name: fully automatic cat toilet model:HIP-C101W power adapter:input AC100-240V/0.4A output DC12V/1A rated power:6W(without UV lamp sterilization power) UV lamp sterilization power:5W standby power:0.5W weighing range:1-20kg(MAX) weighing precision:0.01kg (static) cat litter load:3L collecting bucket capacity:3L running noise:55dB(A weighting) UV wavelength: 253.7nm UV lamp working time:15minutes classification of electrical appliance:IIType equipment product size:length655mm x width642mm x height605mm net weight:8.50.3kg normal working environment:environment temperature5~40C,Relative humidity93%,no condensation storage and transportation environment:environment temperature-20~60 C,Relative humidity 93%,no condensation 4. Instructions Product sketch Preparation before turning on Before connecting the power supply adapter, make the following preparations (otherwise the weight sensor of the device cannot initialize the data). 1. First load the cat litter onto the silicone tray (refer the MAX line). 2. Take out the collection bucket, put the garbage bag on it, and put the bucket back in its place. Turn on the device Connect the adaptor to the device (IN DC 12V), the device automatically enters the standby state. Display interface and function operation. Working status: the green indicator light is flashing, indicating that the cleaning cabin is about to rotate; the green indicator light is on steady when the cleaning cabin is rotating. Weight display: when the cat is in use, it is displayed as the cats weight. No bucket reminder: it will be displayed after the collection bucket is taken out. The voice will be broadcast, and the device will stop working. STOP: the cleaning cabin will stop when it is rotating, and it will be displayed when device in the induction protection and sterilization mode. Bucket full reminder: display when the bucket is full, and the device will stop working. 5. Usage of APP Use your cell phone to search tuyasmart in app store or scan the QR code on the product. Then download and setup . The device is placed within the effective distance of WIFI, and the device is on standby. Switch on cell phones WIFI, location, Bluetooth, then open the APP, click "Add Device" on the homepage, then click "Auto Scan". Immediately press the button under the display of device for 5 seconds, until hearing the "ticking" sound, and the WIFI icon flashes. Click "Access location" in the "Auto Scan" of the APP, and then click "Start Search". When searched for the "automatic cat litter box" then click "Next". Enter the WIFI password and click confirm. Click Done after connecting and adding successfully. Function Description Cat Weight Real-time feedback of the cat's weight Toilet times Number of times cat go to toilet every day One-click cleaning Press once, the device will run one time for cleaning Smart deodorizing

(optional attachment) null Voice switch On or off the voice of device Trash can switch Switch to large or small trash can Timed sleep Click to enter, you can add timing time. Health management excretion time duration Figure shows cats weight, excretion times, Delayed cleaning settings Set the time from cat leaving to device cleaning 6. Cleaning and Maintenance Clean the top cover and surface Please unplug the power supply adapter, use a clean, soft, damp cloth with some detergent to wipe. Note: There is a circuit board inside the product, and liquids are not allowed to enter. Clean the cleaning cabin and collection bucket The cleaning cabin and the collection bucket are detachable structures, which can be disassembled and washed separately, but they must be dried before put back. Disassembly steps:

Unplug the power supply adapter. Take out the top cover (refer to the product sketch). Remove the fixing band (refer to the product sketch). Take out the cleaning cabin. 7. Common Failures and Troubleshooting Methods Item Failure Cause Analysis Troubleshooting 1. Check if the placement is balanced and stable, The check if it is placed on a hard floor or wooden floor. weight 2.Check if the cat litter pad is in contact with the 1 value has device. Reposition device. changed 3.Check if there are other objects in contact with the device. 1. Sensor initialization error. Restart the device. 2 Not work 2. Malfunction If it still does not work, please contact customer service. If it still fails after done the above, please call the customer service for consultation. Note: The company reserves the right to change the technology and appearance of the product. Specifications and information are subject to change without notice. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Page 1 of 1 FCC ID:

2AU4DDCD LABEL AND LOCATION Self-Cleaning Cat Litter Box Model: CLB0A FCC ID: 2AU4DDCD This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Shenzhen Soikoi Technology Co.,Ltd 2A1803 ZhongLiang Square 2a1803, RuYi Road, LongGang Dist, ShenZhen China Date: 2023-9-14 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The letter grants authorization for representative of X-Sense Innovations Co., Ltd. to apply for its own FCC identification number FCC ID: 2AU4DDCD for the product that is the subject of the Shenzhen Soikoi Technology Co.,Ltd , FCC ID: 2A3X7HIP-C101W, granted on 12/30/2021. The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the changed equipment. Applicant/Grantee (Original Company) Name: Shenzhen Soikoi Technology Co.,Ltd Applicant/Grantee (New Company) Name: X-Sense Innovations Co., Ltd. New applicant Grantee Code (s): 2AU4D New applicant FRN (s): 0028970382 Name of New Point of Contact to be in EAS Database: li xu E-mail address of New Point of Contact in EAS Database: xu.li@x-sense.com Please contact me if you have any question. Contact name / title : yk guo/Sales Company: Shenzhen Soikoi Technology Co.,Ltd address : 2A1803 ZhongLiang Square 2a1803, RuYi Road, LongGang Dist, ShenZhen China Tel: 0769-82527696 Fax: 0769-82527696 E-mail: sunny.yang@lcs-cert.com

X-Sense Innovations Co., Ltd. B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-9-14 To whom it may concern:

We, X-Sense Innovations Co., Ltd. , hereby certify that the equipment for which authorization is sought

(FCC ID: 2AU4DDCD) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature li xu Manager X-Sense Innovations Co., Ltd. 3 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9

. 2 _ u q E d e r e v o C

l e d o m

_ 2 6

X-Sense Innovations Co., Ltd. B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-9-14 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AU4DDCD including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

li xu/Manager X-Sense Innovations Co., Ltd. B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China 755 2267 0560 755 2267 0560 xu.li@x-sense.com

X-Sense Innovations Co., Ltd. B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules Reference: FCC ID: 2AU4DDCD Date: 2023-9-14 To The Commission:

This change of Identification request applies for a new FCC ID: 2AU4DDCD as established in 47CFR 2.933(b) for a currently approved device. This application by X-Sense Innovations Co., Ltd. will establish a new FCC ID under X-Sense Innovations Co., Ltd. Grantee code for purpose of marketing. The original grant to Shenzhen Soikoi Technology Co.,Ltd will remain in effect. An authorization letter by Shenzhen Soikoi Technology Co.,Ltd attached. Per 2.933(b) 1. The original identification is FCC ID: 2A3X7HIP-C101W 2. The original grant date is 12/30/2021 3. The equipment is identical to the original equipment. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Clients name / title : li xu/Manager Company: X-Sense Innovations Co., Ltd. address : B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Tel: 755 2267 0560 Fax: 755 2267 0560 Email: xu.li@x-sense.com

X-Sense Innovations Co., Ltd. B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Date: 2023-9-14 To:

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: 2A3X7HIP-C101W; Model Number: HIP-C101W New FCC ID: 2AU4DDCD; Model Number: CLB0A, This is to advise and officially, that we, X-Sense Innovations Co., Ltd. hereby declare that the product name is same and only FCC ID and model number difference as market requirement;

The original test results continue to be representative of and applicable to the equipment of the new FCC ID;

If you have any query, please feel free to contact me. Sincerely, Clients name / title : li xu/Manager Company: X-Sense Innovations Co., Ltd. address : B4 503D,Tower B,Kexing Science Park, No15 Keyuan Road,Technology Park Community, Yuehai Avenue,Nanshan District,Shenzhen China Tel: 755 2267 0560 Fax: 755 2267 0560 Email: xu.li@x-sense.com

X-Sense Innovations Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 9/12/2023 X-Sense Innovations Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:

2AU4DDCD):

Name and company of U.S. agent:

FCC US Agent, LLC Physical U.S. address of agent:

3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent:

0033402884 Email address of U.S. agent:

Support@FCCUSAgent.com FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of X-Sense Innovations Co., Ltd.. X-Sense Innovations Co., Ltd. with the FRN 0028970382 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature li xu Manager X-Sense Innovations Co., Ltd. 5 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature Tim Payne Manager FCC US Agent, LLC