FCC ID: 2AU4DDBX Smart Security Camera

Wireless Smart Battery Camera Operation Instruction Packing list 1. Camera*1 2. Bracket*1 3. Mounting kit*1 4. USB charging cable *1 5. Operation instruction*1 Product appearance Infrared light Lens Spotlight Indicator light Microphone Human body infrared sensor Threaded bracket interface Speaker Threaded bracket interface Micro-USB port Power button Reboot hole Micro-SD card slot Quick start The wireless smart battery camera supports battery-powered supply and AC-powered supply. 1. Download and install the App The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration. Android Download App Store Download Scan QR code or go to the link to download and install the App https://www.vicohome.io/download/

2. Add the device Sign in to App prompts (please bring the device close to the router when configuring). connect to Wi-Fi and add the device according to the Power on/off and network configuration Long press the power button for 3s to power on/off the device. Double click the power button to enter the network configuration mode after the prompt tone. When connecting the camera for the first time, use the App and follow the instruction to configure the camera network. Set up the camera 1) Click the "Add Camera Now" in the App and enter the Wi-Fi network name and password that you want the camera to connect. To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise-level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click

"Continue" to generate the QR code for pairing the camera. 2) After pressing the camera switch for 3 seconds, the camera will turn on. At this moment, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a

"Di" sound, which represents the scanning is succeeded and the pairing is started. Power button about 7 inches (20cm) 3) After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click

"Continue" to complete the pairing. Possible problems with binding:

When you hear the "Wi-Fi Password Error", please check whether the Wi-Fi password you entered in the App is correct;

When you hear the "Authentication error", please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;

When you hear the "Wi-Fi not found", please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be searched by the device;

When you hear the "Retrieving IP timeout", it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;

When you hear the "Cloud service connection fail", please check whether your router is connected properly to the external network. When you hear this error prompt,it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily turn off the firewall to connect again. Install the camera You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.

(1) Select a good spot for your camera Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera's field of view than movements toward or away from the camera. About 15 downward Recommended height About 6 ft

(2) Install the bracket 1) Screw fixing:

Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing. 2) Fix the camera Align the bracket screw with the screw hole on the back or bottom of th e camera, and then rotate it to the tightened state. 3)Adjust the angle Adjust the camera to an appropriate angle, the best angle is about 15 degrees downward and then tighten the base by rotating it in clockwise direction to fix the angle. About 15 downward Share the camera When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device. 1) Find the camera you want to share on the App homepage or camera setting page. Find the button and enter the sharing page. 2) Click "Invite", and a QR code will be generated for sharing. 3) For the members you need to share, find "Add Friends Camera" in the "User" page to enter the scanning page. 4) Scan the QR code on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree. Charge the camera App will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera's indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 10 hours to fully charge the camera. Indicator light status Mode Status Working mode Sleep mode Charging mode Fully charged mode Blue Off Yellow Green Product specification Item Specification Camera lens Field of view: 110 Image resolution Max. 19201080 Video bit rate Storage media Adaptive Micro SD card (Up to 128GB) Battery capacity 5200mAh/6700mAh *

Adapter requirement 5V/1.5A Size 67*58*89mm Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading. FCC warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference.

(2) this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FAQ 1.Q:Camera permission management: How to invite family and friends to use my camera together?

A: Open the App and select your camera on the home page. Click the share button on the home page or the "Share" in the camera settings to enter the sharing page, and then click "Invite " to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone. 2.Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?

A: On Apple devices with iOS13 and above, you need to turn on the

"location permission" for the app in the system settings and change it to "allow when using."

3. Q:Will the camera show red lights when night vision is activated?

A: The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment. 4.Q:What are the requirements for Wi-Fi?

A: Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required. 5.Q:How far should the camera be placed from the router?

A: After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. 6.Q:What is the maximum length of recording time?

A: If you set the duration as "Auto", when someone occurs in the view of the camera, it will start recording a video for up to 3 minutes. 7.Q:How to quickly view videos by category?

A: Click the icon in the upper left corner of the "Library" page to start filtering videos by category. Select the category you want to see and then click "Save" to view the video playbacks. 8.Q: What should I do when the device is in malfunction?

A: Long press the power bottom for 3 seconds to restart it. If there is no response, you can remove the rubber plug at the button of the camera. Press the reboot hole with a pointed object to restart the camera. V1.0.2

Appendix ID Label Smart Security Camera FCC ID: 2AU4DDBX Model: SSC0A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Size for the label: 30mm X 30mm Appendix ID Label Location FCC ID: 2AU4DDBX TB-RF-074-1.0

Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen China Date: 2023-5-8 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, The letter grants authorization for representative of X-Sense Innovations Co., Ltd. to apply for its own FCC identification number FCC ID: 2AU4DDBX for the product that is the subject of the Shenzhen ADDX Innovation Technology co. ,LTD., FCC ID: Z2AUDF-CG62X, granted on 04/03/2023. The equipment is electrically identical. The only change being the label on the device. The original test results, technical information and relevant documents continue to be representative of and applicable to the changed equipment. Applicant/Grantee (Original Company) Name: Shenzhen ADDX Innovation Technology co. ,LTD. Applicant/Grantee (New Company) Name: X-Sense Innovations Co., Ltd. New applicant Grantee Code (s): 2AU4D New applicant FRN (s): 0028970382 Name of New Point of Contact to be in EAS Database: li xu E-mail address of New Point of Contact in EAS Database: [email protected] Please contact me if you have any question. Contact name / title : Garry yang// C ai \ J ced Company: Shenzhen ADDX Innovation Technology co. ,LTD. a address : NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park, Nanshan District shenzhen China Tel: 18594279025 Fax: 0755-32914980 E-mail: [email protected]

X-Sense Innovations Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-5-8 To whom it may concern:

We, X-Sense Innovations Co., Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: 2AU4DDBX) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). Sincerely, a

(; XU Signature li Xu

= X-Sense Innovations Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1.

X-Sense Innovations Co., Ltd. B4 503D,Tower B, Kexing Science Park, No15 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-5-8 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AU4DDBx including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title: lixu/N/A [i XV Company: X-Sense Innovations Co., Ltd. Address: B4 503D,Tower B, Kexing Science Park, No15 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Phone: 755 2267 0560 Fax: 755 2267 0560 E-Mail: [email protected]

X-Sense Innovations Co., Ltd. B4 503D,Tower B, Kexing Science Park, No15 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attention: Application Examiner / Review Engineer Subject: Request to change in identification per section 2.933 of FCC rules Reference: FCC ID: 2AU4DDBX Date: 2023-5-8 To The Commission:

This change of Identification request applies for a new FCC ID: 2AU4DDBxX as established in 47CFR 2.933(b) for a currently approved device. This application by X-Sense Innovations Co., Ltd. will establish a new FCC ID under X-Sense Innovations Co., Ltd. Grantee code for purpose of marketing. The original grant to Shenzhen ADDX Innovation Technology co. ,LTD. will remain in effect. An authorization letter by Shenzhen ADDX Innovation Technology co. ,LTD. attached. Per 2.933(b) 1. The original identification is FCC ID: 2AUDF-CG62X 2. The original grant date is 04/03/2023 3. The equipment is identical to the original equipment. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachments:

FCC ID label and label location External photographs Letter of Change FCC ID Authorization Letter for FCC ID User Manual Product Equality Declaration Sincerely, Client's name / title : li xu/N/A / XV Company: X-Sense Innovations Co., Ltd. address : B4 503D,Tower B, Kexing Science Park, Nol5 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Tel: 755 22670560 Fax: 755 2267 0560 Email: [email protected]

X-Sense Innovations Co., Ltd. B4 503D,Tower B, Kexing Science Park, No15 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Date: 2023-5-8 To:

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, Original FCC ID: 2AUDF-CG62X; Model Number: CG6 New FCC ID: 2AU4DDBX; Model Number: SSCOA This is to advise and officially, that we, X-Sense Innovations Co., Ltd. hereby declare that the original product name is Smart Battery Camera, New product name is Smart Security Camera, Only FCC ID and model number difference as market requirement;

The original test results continue to be representative of and applicable to the equipment of the new FCC ID;

If you have any query, please feel free to contact me. Sincerely, Client's name /title: lixwNW/A | <V Company: X-Sense Innovations Co., Ltd. address: B4 503D, Tower B, Kexing Science Park, No15 Keyuan Road, Technology Park Community, Yuehai Avenue, Nanshan District, Shenzhen, China Tel: 755 2267 0560 Fax: 755 2267 0560 Email: [email protected]

VO04 l\

X-Sense Innovations Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/10/23 U.S. Agent Designation X-Sense Innovations Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2AU4DDBx:

Name and company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of X-Sense Innovations Co., Ltd. X-Sense Innovations Co., Ltd. with the FRN 0028970382 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.91 1(d)(7). Sincerely,

[i_ Xv Signature li xu X-Sense Innovations Co., Ltd. Signature Tim Payne FCC US Agent, LLC The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 DO1. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.