Exhibit H: Users Manual Xanboo Door Sensor XSC501 APPROVALS ///
FCC ID NUMBER: OU4-XSC501 / IC: 4576A-XSC501 STANDARDS 93/68/EEC, 89/336/EEC, BS EN 50082-1:1992, 73/23/EEC, EN60950:1992 CE INSTRUCTION TO THE USERS (IF DEVICE DOES NOT CONTAIN A DIGITAL DEVICE) The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. INSTRUCTION TO THE USER (IF DEVICE CONTAINS A DIGITAL DEVICE) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferences will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Increase the separation between the equipment and receiver
. DRILLING TEMPLATE FOR WALL MOUNTING SENSOR(S) ///
DRILL HOLES IN THESE POSITIONS WIRELESS DOOR/WINDOW SENSOR XWS10D USERS GUIDE PRODUCT DESCRIPTION ///
The Xanboo Door/Window Sensor allows for convenient placement. Using a magnetic force field created between the sensor and a magnetic contact you can secure household doors, office doors, file cabinets or windows. E.Go back to your PC and confirm that the device has been discovered and displayed. PACKAGE CONTENTS ///
n (1)Door/Window Sensor n (1)Magnetic Contact n (1)Hardware Kit n (1)Installation Guide DOOR/WINDOW SENSOR MAGNETIC CONTACT HARDWARE KIT CONNECTING TO THE GATEWAY ///
DISCOVERING NEW DEVICES In order for the Gateway to control Xanboo devices such as cameras and sensors, each device must be registered with the Gateway . The iG3 Gateway establishes a secure wireless network between itself and all discovered Xanboo devices. The Gateway can only control devices that it has discovered. New devices can be discovered at any time:
to begin discovery for your Door/Window Sensor. A.Log into the iG3 using XANASSIST B.Click on the DISCOVERY menu option C.Click the START DISCOVERY menu item, on the left,
D.At this time, using a paper clip, press the
Window Sensor. The light on the device will turn
green when the Gateway has discovered it properly. DISCOVERY button on the back of your Door/
MOUNTING HOLE MOUNTING HOLE DEVICE DISCOVERY BUTTON NOTE: After a brief period, the LED will turn off. The LED is only Green when transmitting. The LED is not 'lit' during sleep mode (waiting for the next time to transmit a signal). SETUP WIZARD DEVICE DISCOVERY (IN PROGRESS) PAGE F. Click on the STOP DISCOVERY menu option when you are finished discovering all of your devices. G.The Gateway and devices are now ready to be used. ADDITIONAL NOTES A.This page will refresh every 10 seconds to show newly discovered devices. You may have to
wait for a refresh to see the device listed. B.The Gateway will automatically stop discovery after 10 minutes or if you browse off the page C.New devices can only be discovered when the Gateway has an active Internet connection
(ie. your Gateway is connected to the internet). MOUNTING ///
The Xanboo Door/Window Sensor is constructed of UV resistant ABS plastic allowing for indoor or sheltered outdoor use. The Sensor works by creating a magnetic field between the Sensor base and the magnetic contact. When there is a change in status, either opening or closing, the Sensor will trigger an event to the Gateway. The spacing between the Sensor and the contact should be between 1/10 inch and .5 inch. NOTE: The Door/Window Sensor cannot be used on metal doors, metal door frames or metal objects. 1.Peel the paper strip from the double-sided tape located on the back of the Sensor.
You can also mount the sensor more securely using the screws in the hardware kit.
Using the drilling template on the back of the instruction guide, drill two small holes for
1/16 space between the screw head and the object, the screws. Affix the screws to one side of the object (typically the stationary side) leaving 2.Mount the Sensor onto the screws and slide down to lock into place 3.The magnetic contact should now be placed on the other side of the object (typically the
side that moves) I 2 4.Either peel the paper strip from the double-sided tape located on the back of the contact
or you can more securely attach it using screws in the hardware kit. Remove the cover from the contact and insert the screws through the holes on the top and bottom of the contact. 5.Make sure the magnetic contact aligns with the top of the Sensor base on either the left
or right sides of the base. MOUNTING AND POSITIONING OF MAGNETIC CONTACT HELPFUL HINTS ///
The Xanboo Door/Window Sensor is suitable for indoor and outdoor use. Please bear in mind the following points when choosing a mounting position:
or metal objects. n Xanboo Door/Window Sensor cannot be mounted on metal doors, metal door frames
n Be sure to use 2-AAA alkaline batteries from a reliable manufacturer
does not support rechargeable NiCad or NiMH batteries. However
power saving functionality. n You may want to periodically use the test button to ensure the gateway can hear the sensor
, the sensor does have
. Currently the sensor
. TROUBLE SHOOTING ///
SYMPTOM LED does not light up Gateway does not recognize the sensor during discovery Sensor continually sends an event REMEDIES 1. Be sure the batteries are properly inserted with the correct polarity 2. Be sure you are using fully charged batteries
. 1. Ensure sensor has correct power 2. Position the sensor in closer proximity to the gateway and try again. 3.Check to make sure there is no other wireless devices interfering with
the sensor. The sensor transmits on the 418 MHz or 433 MHz frequencies 1.Check to make sure that you have the proper settings configured for
the sensor. The sensor can be configured so that it can send an event
when the contacts are closed or when they are opened. 3 SYMPTOM REMEDIES Events are not triggered
. 1.Check to make sure that the sensor has been registered properly with the gateway 2.Check to make sure that the gateway is currently connected to the internet
and is online. 3. Check to make sure the spacing between the contact and the sensor is
between 1/10 and 1 4. Check to make sure that you have the proper settings configured for
5. Ensure that the sensor and contact are not placed on metal or magnetic objects the sensor. The sensor can be configured so that it can send an event when the contacts are closed or when they are opened. FAQS ///
HOW FAR AWAY CAN THE SENSOR BE PLACED FROM THE GATEWAY?
Typically 60-80 feet. CAN I PLACE THE SENSOR IN A DIFFERENT ROOM FROM THE GATEWAY?
Yes, the sensor and gateway use radio frequencies to communicate with each other These frequencies can go through objects like walls, ceilings and floors
. HOW LONG WILL THE BATTERY LAST?
The battery is expected to last up to 12 months. This will depend on actual use and how often the sensor is triggered. The Xanboo Door/Window Sensor includes battery saving features that make the Sensor hibernate when there is no activity. It wakes-up when the sensor is triggered HOW MANY SENSORS CAN I REGISTER WITH MY GATEWAY?
The gateway can support up to 8 sensors. THE LIGHT ON THE SENSOR IS NOT ON?
This indicates that the sensor has gone into hibernation mode. It will wake up when the sensor is triggered. TECHNICAL SPECS ///
n Attaches to any flat surface n Operates on 2-AAA Alkaline batteries n LED indicator when sensor is triggered n Test/Discover button n Magnetic contacts n Key-fob ready for enabling encrypted communications Typical Range Outdoors: 250 feet Typical Range Indoors: 60 feet 418-433 MHz Frequency Range: WARRANTY ///
This product has a one year manufacturers warranty which covers parts and labor only. In the unlikely event that you encounter a problem, the unit should be returned to the place of purchase. 4