Exhibit J: Users Manual Xanboo Security Camera, Model XWC700 DRILLING TEMPLATE FOR WALL MOUNTING CAMERA(S) ///
For wall-mounting Camera(s), drill two holes using a 7/32 drill bit and the template below. Insert supplied wall anchors into holes and secure camera to wall with supplied screws. Printers and copy machines can affect the scale of this template. Before drilling, compare this template with the actual camera by placing the template on the back of the camera and observing if mounting holes on camera line up exactly with the drill holes on this template. WIRELESS CAMERA DRILL HOLES IN THESE POSITIONS PRODUCT DESCRIPTION ///
The Shell HomeGenie Wireless Camera is a 2.4 GHz wireless camera with motion detection. PACKAGE CONTENTS ///
n (1) Shell HomeGenie Wireless Camera n (1) 9V Power Supply n (1) Wall Mounting Kit SHELL HOMEGENIE WIRELESS CAMERA WALL MOUNTING KIT 9V CAMERA ADAPTER WALL MOUNTING ///
NOTE: Be aware of the length of the power adapter cord before selecting a mounting position. 1.Using the holes on the drilling template on the back page of the manual, mark the position
of the holes to be drilled. For drywall or other composite surfaces use a a 7/32 drill bit.
Drill a hole for each of the mounting screws and insert a plastic wall plug into each hole. 2.Using the screws provided, secure the camera to the wall. 3.Position the camera to view the desired area and plug in the power supply.
Please keep in mind that the field of view is 80 degrees and motion sensor
distance is up to 30 feet. 4.Any slight adjustments can now be made to the camera viewing angle by
tilting and panning the camera head with your hand. 5.It is recommended that the antenna be set fully vertical. WALL MOUNTED TABLETOP MOUNTING ///
Alternatively the camera may be placed on a level surface. 1.Plug in the power supply 2.Any slight adjustments can now be made to the camera viewing
angle by tilting and panning the camera mirror with your hand. DESK/TABLETOP MOUNTING 3.Adjust the antenna as needed. It is recommended that the antenna stay
at a 90-degree angle to the base of the camera for the best picture quality. TECHNICAL SPECS ///
n High resolution color video camera with motion detection n All hardware for either wall or ceiling mounting included n AC or battery operation (batteries not included) n Auto Brightness, Auto Contrast, Auto White-Balance TV System: Integrated Lens: Motion and camera lens: Focus range: Resolution: Signal/Noise Ratio: Image Sensor: Frequency Range: High Speed Electronic Shutter: Modulation: Min Illumination: Current Consumption: Channel Selection: RX Sensitiivity: Typical free range space: Typical indoor range: NTSC or PAL (color) standard 4.3 mm, F2.0 fixed focus 80 degree field of view 2 - Infinity 360 horizontal TV lines 48 dB 1/3 CMOS 2.41 - 2.47GHz 1/60 - 1/15,000 sec FM 3 lux approx. 220mA Electronic tuning with PLL
-102 dBm 200 feet 60 feet APPROVALS ///
FCC ID NUMBER: OU4-XWC700 / IC: 4576A STANDARDS 93/68/EEC, 89/336/EEC, BS EN 50082-1:1992, 73/23/EEC, EN60950:1992 CE INSTRUCTIONS TO THE USER:
The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferences will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. CE directive 93/68/EEC, EMC directive 89/336/EEC, LV directive 73/23/EEC. This class B digital apparatus complies with Canadian ICES-003. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Increase the separation between the equipment and receiver. I 2