companies    
happy holidays!

FCC ID: 2AQPLLBEE5HY1MW Communication Module

by: Xaptum, Inc. latest update: 2020-12-17 model: LBEE5HY1MW

Five grants have been issued under this FCC ID from 02/11/2019 to 12/17/2020 (this is one of two releases in 2020 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked warrantee terms, password defaults, instructions, drivers, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photos
app s submitted / available
1 2 3 4 5 user manual Users Manual pdf 228.47 KiB December 17 2020
1 2 3 4 5 int photos Internal Photos pdf 129.57 KiB December 17 2020
1 2 3 4 5 ext photos External Photos pdf 1.56 MiB December 17 2020
1 2 3 4 5 Antenna Info Cover Letter(s) pdf 413.08 KiB December 17 2020
1 2 3 4 5 Class II Change letter Cover Letter(s) pdf 327.09 KiB December 17 2020
1 2 3 4 5 Limited usage Cover Letter(s) pdf 250.31 KiB December 17 2020
1 2 3 4 5 Test Report Test Report pdf 1.46 MiB December 17 2020
1 2 3 4 5 Test Setup photos Test Setup Photos pdf 812.51 KiB December 17 2020
1 2 3 4 5
Cover Letter(s) pdf November 02 2019
1 2 3 4 5
Cover Letter(s) pdf November 02 2019
1 2 3 4 5
ID Label/Location Info pdf November 02 2019
1 2 3 4 5
Cover Letter(s) pdf November 02 2019
1 2 3 4 5
ID Label/Location Info pdf November 02 2019
1 2 3 4 5 user manual Users Manual pdf 228.47 KiB December 17 2020
1 2 3 4 5 int photos Internal Photos pdf 129.57 KiB December 17 2020
1 2 3 4 5 ext photos External Photos pdf 1.56 MiB December 17 2020
1 2 3 4 5 Antenna Info Cover Letter(s) pdf 413.08 KiB December 17 2020
1 2 3 4 5 Class II Change letter Cover Letter(s) pdf 327.09 KiB December 17 2020
1 2 3 4 5 Limited usage Cover Letter(s) pdf 250.31 KiB December 17 2020
1 2 3 4 5 Test Report Test Report pdf 1.46 MiB December 17 2020
1 2 3 4 5 Test Setup photos Test Setup Photos pdf 812.51 KiB December 17 2020

frequency equipment class purpose
1 2020-12-17 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2019-02-11 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/25/2018
4 2412 ~ 2462 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018

Application Forms

app s Applicant Information
1 2 3 4 5 Effective 2020-12-17
1 2 3 4 5 2019-02-11
1 2 3 4 5 Applicant's complete, legal business name Xaptum, Inc.
1 2 3 4 5 FCC Registration Number (FRN) 0027710342
1 2 3 4 5 Physical Address 541 N Fairbanks Ct Suite 2200
1 2 3 4 5 541 N Fairbanks Ct
1 2 3 4 5 Chicago, IL
1 2 3 4 5 Chicago, Illinois 60611
1 2 3 4 5 United States
app s TCB Information
1 2 3 4 5 TCB Application Email Address B******@phoenix-testlab.de
1 2 3 4 5 B******@phoenix-testlab.de
1 2 3 4 5 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 Grantee Code 2AQPL
1 2 3 4 5 Equipment Product Code LBEE5HY1MW
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 Name D****** R******** B****
1 2 3 4 5 Title VP, Product Delivery
1 2 3 4 5 Telephone Number 505-8********
1 2 3 4 5 Fax Number 505-8********
1 2 3 4 5 E-mail d******@xaptum.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 4 5 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Communication Module
1 2 3 4 5 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 Modular Equipment TypeLimited Single Modular Approval
1 2 3 4 5 Single Modular Approval
1 2 3 4 5 Purpose / Application is forClass II Permissive Change
1 2 3 4 5 Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/25/2018
1 2 3 4 5 Change in identification of presently authorized equipment. Original FCC ID: VPYLBEE5HY1MW Grant Date: 05/24/2018
1 2 3 4 5 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 Grant CommentsPower output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. Class II Permissive Change adds a new antenna trace RF layout in combination with an external omnidirectional antenna (max gain 3 dBi@2.4 GHz / 5 dBi@5GHz) as documented in this filing. The composite certified Bluetooth functionalities (DSS/DTS), UNII band 2 (5250-5350 MHz) and 3 (5470-5725 MHz) and the 80 MHz mode of UNII Band 2 and 4 are disabled via firmware for the usage of this new dedicated constellation. Integration of this modular transmitter with the new antenna trace RF layout in combination with this external antenna is strictly limited to the Grantee himself - therefore the modular type is changed to Limited.
1 2 3 4 5 Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters. Class II Permissive Change adds a new antenna trace RF layout in combination with an external omnidirectional antenna (max gain 3 dBi@2.4 GHz / 5 dBi@5GHz) as documented in this filing. The composite certified Bluetooth functionalities (DSS/DTS), UNII band 2 (5250-5350 MHz) and 3 (5470-5725 MHz) and the 80 MHz mode of UNII Band 2 and 4 are disabled via firmware for the usage of this new dedicated constellation. Integration of this modular transmitter with the new antenna trace RF layout in combination with this external antenna is strictly limited to the Grantee himself - therefore the modular type is changed to Limited.
1 2 3 4 5 Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth and WLAN 802.11b/g/n transmitters. This device has 20/40/80 MHz bandwidth modes.
1 2 3 4 5 Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Classic Bluetooth and WLAN 802.11a/n/ac transmitters.
1 2 3 4 5 Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains Bluetooth Low Energy and WLAN 802.11a/b/g/n/ac transmitters.
1 2 3 4 5 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 Firm Name PHOENIX TESTLAB GmbH
1 2 3 4 5 MRT Technology (Suzhou) Co., Ltd.
1 2 3 4 5 Name H****** B********
1 2 3 4 5 M****** C********
1 2 3 4 5 Telephone Number 49-52********
1 2 3 4 5 +86-5******** Extension:
1 2 3 4 5 Fax Number 49-52********
1 2 3 4 5 E-mail o******@phoenix-testlab.de
1 2 3 4 5 m******@mrt-cert.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2412.00000000 2462.00000000 0.2415000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC 5180 5240 0.0303
2 2 15E 38 CC 5745 5825 0.0237
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC 5180 5240 0.0303
3 2 15E 38 CC 5260 5320 0.0296
3 3 15E 38 CC 5500 5720 0.0278
3 4 15E 38 CC 5745 5825 0.0237
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.0032
4 2 15C CC 2412 2462 0.2415
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0070000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: ZD3FTF360 Feitian Technologies Co., Ltd. 2BL7L-DG25ELMT DG Shades LLC 2BE3U-X1 CND Electronic Technology (shenzhen) Co.,Ltd 2ADYY-T1001W TECNO MOBILE LIMITED 2BLC6-LMT-DVR Shenzhen DAZA Innovation Technology Co.,Ltd

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC