MT20w Enrollment Reader User Guide Table of Contents Overview .................................................................................... 4 Operational Behavior ................................................................. 5 Communication ..................................................................... 5 Output ................................................................................... 5 RF Field ................................................................................. 6 Configuration Card ..................................................................... 6 Specifications ............................................................................. 7 Reader Specifications ........................................................... 7 Card Specifications ............................................................... 7 Card Technologies Supported ................................................... 8 125kHz Technologies ............................................................ 8 13.56MHz Technologies ........................................................ 8 Notes ......................................................................................... 9 AptiQ MT20w Enrollment Reader User Guide 3 Overview Overview The aptiQ MT20w multi-technology enrollment reader is designed to simplify the enrollment of proximity and smart credentials by using a computers USB connection. The MT20w does not require software to operate, and will function on any operating system. The MT20w is an ISO14443 and ISO15963 contactless credential reader, and is compatible with aptiQ smart credentials (MIFARE Classic and MIFARE DESFire EV1), aptiQmobile credentials, PIV credentials, and most proximity credentials up to 37-bits. Connect the readers USB to your operating system. You will see a series of green/red LED flashes and beeps:
zz zz zz 2 green LED flashes. 1 red LED flash, followed by a beep. 3 red LED flashes, with each flash followed by a beep. The LED will then turn red and stay on, indicating that the reader is ready. If the LED and the beeper do not respond, check the cable connections. Put the cursor in the desired field to receive the output and present a valid credential. You will see a series of green/red LED flashes, along with a beep:
zz zz Red LED will flash to green, followed by a beep. Green LED will flash back to red and stay on, indicating the reader is again ready for the next valid credential. The enrollment reader output will place the information from the credential to the cursors location on the screen. If a non-valid credential is presented to the enrollment reader, the red LED will not change, and there will be no beep. Spanish and French translations are online at www.allegion.com/us. 4 AptiQ MT20w Enrollment Reader User Guide Operational Behavior Operational Behavior Communication The MT20w Enrollment Reader communicates over USB. Output The USB connection uses Human Interface Device (HID) Keyboard Interface that requires the user to put the cursor in the desired field to receive the output. The default output is (Hexadecimal) for the NDE ENGAGE product. There are other outputs available and they can be ordered when ordering the enrollment reader. If you ordered the default output and now require a different output, please contact Allegion Technical Support at 1-877-671-7011, option 2. The following are the outputs available. Output Examples:
The examples provided were read from a 26 bit card FC 55, BID 1546 zz zz zz zz Default Configuration - CE-401-073 z{
For use with ENGAGEv Web Application Example - 26E0C15;26A;55;1546;
Octal Output - CE-401-061 z{
For use with Schlage Express Example - 0000000633406025 FC/BID Output - CE-401-060 (SUSB89 default) z{
For use as Keystroke Emulator Example - 55000001546 BID Only - CE-401-069 z{
For use as Keystroke Emulator Example - 000001546 Note: Please proceed to the following link to find a list of card formats supported by the ENGAGE (NDE) Web app. www.allegionengage.com AptiQ MT20w Enrollment Reader User Guide 5 Configuration Card Operational Behavior Configuration Card Using a Configuration Card to change enrollment readers output To change the enrollment reader output you will need a configuration card. zz Power cycle the reader After reader has powered up and within 60 seconds present the configuration card to the reader. The reader will confirm the configuration change by:
z{
zz zz zz zz 2 short beeps 2 flashes of Red LED z{
The reader will then reset itself z{
2 green LED flashes + beeps 1 red LED flash + beep 3 Red LED flashes + 3 beeps z{
z{
The LED will then turn red and stay on, indicating that the reader is ready. RF Field Every 100ms the RF field turns on and the reader polls for cards. The 13.56 MHZ field is on for approximately 42 ms in the default reader configuration, which is maximum complexity. The 125 kHZ field is on for approximately 20 ms in the default reader configuration, which is maximum complexity. 6 AptiQ MT20w Enrollment Reader User Guide Specifications Specifications Reader Specifications Reader Specifications Physical Dimensions Operating Temperatures
(L x W x H) 5.56 x 2.00 x .695 0 to 40 C Frequency Weight Power Supply Interface Current Requirement Max Current Requirement 125 kHz & 13.56 MHz 4.1 oz Connect to powered USB port or via USB power USB 110 mA 275 mA Card Specifications Card Read Ranges Card Frequency Card Type Read Range ASK, FSK 125 kHz Up to 2.5 (6.3 cm) 13.56 MHz ISO 15693 Up to 3.0 (7.6 cm) ISO 14443A MIFARE Standard Up to 2.0 (5.1 cm) 13.56 MHz ISO 14443A MIFARE DESFire EV1 Up to 1 (2.5 cm) 13.56 MHz AptiQ MT20w Enrollment Reader User Guide 7 Card Technologies Supported Card Technologies Supported Card Specifications 125kHz Technologies GE/CASI Proximity HID Proximity (up to 37-bits) AWID Proximity LenelProx 13.56MHz Technologies ISO14443 MIFARE DESFire EV1 with PACSA enabled ISO14443 Secure MIFARE Classic:
XCeedID MIFARE app enabled OESM (dormant - ready to be enabled by end-user) zz zz ISO14443 PIV enabled 75-bit format (other formats available) iClass/CSN enabled 64-bit format ISO15693 CSN enabled 64-bit format ISO14443 CSN disabled (can be enabled using the configuration card) aptiQmobile 8 AptiQ MT20w Enrollment Reader User Guide Notes Notes Card Specifications AptiQ MT20w Enrollment Reader User Guide 9 Notes Notes Card Specifications 10 AptiQ MT20w Enrollment Reader User Guide This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Statement Changes or modifications not expressly approved by the XceedID Corporation to this device could void the users authority to operate the device. FCC part 15.105 Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Industry Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 2015 Allegion ALL RIGHTS RESERVED Document Part Number: xxxxxxxxx Revision A 08/15 Windows is a trademark of Microsoft Corporation. The trademarks used in this manual are the property of the trademark holders. The use of these trademarks in this manual should not be regarded as infringing upon or affecting the validity of any of these trademarks. Allegion reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without the express written permission of Allegion. Customer Service U.S.A.: 877-671-7011 www.allegion.com/us Revision Check www.allegion.com/us for latest product revisions. Contact Information Should a system design engineer or developer need assistance, contact XceedID at:
Allegion 500 Golden Ridge Road Building 1, Suite 160 Golden, CO 80401 Phone: 1-877-671-7011 Fax: 1-866-954-1779 www.allegion.com/us AptiQ MT20w Enrollment Reader User Guide 11 2015 Allegion xxxxxxxxx, Rev. 08/15 www.allegion.com/us Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com.About Allegion 8.50 FRONT 4.25 FRONT 5.50 5.50 BEGINNING SHEET FINAL SIZE Additional Notes:
Revision History 1. Printed saddle-stitched booklet A B C D E F Revision Description:
A > Revised artwork 063451 Material White Paper Notes 1. printed two sides 2. Printed saddle-stitched booklet 2. printed black 3. tolerance .13 4. printed in country may vary 5. drawings not to scale Edited By D. Toppins Title Creation Date 07-20-15 Created By D. Toppins Approved By M. Sasso EC Number Release Date 063451 08-28-15 MT20w Enrollment Reader UG Number xxxxxxxxx Activity 3899 Hancock Expwy Security, CO 80911 Revision A Allegion 2015 Software: InDesign CS6