WARNING TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF IN FIRE OR WATER AMBIENT TEMPERATURE MUST NOT EXCEED 60 MAY EXPLODE IF DISPOSE IN FIRE DISPOSE USED BATTERIES ACCORDING TO USER MANUAL USE SPECIFIED CHARGER ONLY This device complies with part 15 of the FCC rules . Operation is subject to the following two con ditions: (1) this device may not cause harmful interference, and (2) this device must accept any i nterference received, including interference that may cause undesired operation. Getting Started:
Please select the product you want to set up:
Xencelabs Pen Tablet (including Xencelabs Pen Tablet Bundle) Xencelabs Quick Keys only If you are already familiar with the product and just want to download and install the driver, please visit the driver page FCC regulatory conformance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. SECTION: Thank you We appreciate you choosing Xencelabs. We spent countless hours with professional artists to co-design the details of this tablet. As result, two pens are provided to accommodate different hand sizes and personal preferences. Weve made innovations in our pen pressure technology so you can draw with the lightest of touch. If you prefer a heavier touch you can easily adjust it in settings. We believe these pens to be the most sensitive on the market. We also scrutinized over the right amount of surface friction (or tooth) to give a great drawing experience. Some improvements are more subtle like the seamless transition between the active area and palm rest which makes the tablet more comfortable to use. At the center of it all are the advances in the driver. With its modern and attractive interface, you can easily configure your tablet and pens in a way that works best for you. Have fun exploring. We cant wait to see what you create!
Best regards The Xencelabs Team. SECTION: Navigation 1. Box contents 2. Connecting the tablet 3. Install the driver 4. Charging the tablet 5. Key features of the tablet 6. Key features of the Quick Keys (Bundle only) 7. Product Registration 8. Tutorial videos 9. More resources Next: Tablet Box Contents SECTION 1: Tablet Box Contents In the box are:
Xencelabs Pen Tablet (SKU: BPH0812W-A) Thin pen 3 Button pen USB cord Pen case with nibs and nib puller Carrying case Dongle for wireless connection USB A to USB C adapter Drawing glove Warranty sheet Thank you and Quick Setup card Xencelabs sticker Xencelabs Quick Keys Additional USB cord Next: Connecting the Tablet Return to top Image Image Image Image Image Image Image Image Image Image Image Image Image Image If you bought the Xencelabs Pen Tablet Bundle you will also have the following:
If any of these items are missing, please reach out to the Support Team using this link. They will be happy to send you the missing items. SECTION 2: Connecting the Tablet You can use the tablet with a USB wired connection or over wireless. Note that you should connect the tablet before trying to install the driver. If you bought the bundle, you should also connect the Xencelabs Quick Keys before installing the driver. Connecting the Tablet (and Quick Keys) with a USB Cable To use with a USB connection or to charge the tablet, connect the provided USB cable to the tablet and to a USB-A port on a computer (Figure 1). You can connect it to a USB hub, but it must be a powered hub. When you connect the tablet by USB and the computer is powered on, the tablet will turn on automatically. If you bought the Bundle, please connect the Xencelabs Quick Keys via USB cable in the same way as the tablet. Figure 1 Connecting Wirelessly You can connect the tablet wirelessly (Figure 2) with the provided dongle which establishes a wireless connection between the dongle and the tablet. We have provided an USB-A to USB-C adapter if you need it. If you bought the bundle with the Xencelabs Quick Keys, the single dongle will connect both the tablet and the Quick Keys. When fully charged the wireless connection should give you a full day of continuous use. Figure 2 Next: Install the Driver Return to top SECTION 3: Install the Driver While the tablet will detect the pen location without a driver, to get the full functionality of the tablet we strongly recommend that you download and install the driver. Note that to install the driver you may need a user account that has admin rights. Visit the support section of the Xencelabs website and select the latest driver for the Xencelabs Pen Tablet Medium. You will find options for Windows, Mac and Linux. You should download this driver to your computer, run it and follow the instructions on the screen. Important note: make sure you connect the tablet (and the Quick Keys if you bought the bundle) before installing the driver. The installation wizard will only work properly if it can see your devices during setup. After installing the driver return to this page (you can keep it open while you install the driver). Next: Charging the tablet Return to top SECTION 4: Charging the Tablet To charge the tablet (and the Quick Keys if you bought the bundle), connect it to a powered-on PC, a powered USB hub or other USB charger (Figure 3). To use the tablet over a wireless connection you should make sure the tablet is sufficiently charged. When using a 5 volt 1.5 amp power supply, the tablet will take approximately 3 hours to fully charge and will last around 11 hours of continuous use. The driver will give you an indication of tablet charge level. You can also see if the tablet is charging by looking at the power LED. The Quick Keys, if you bought the bundle, has similar LEDs. Figure 3 Next: Key Features of the Tablet Return to top SECTION 5: Key Features of the Tablet Figure 4 shows the key features of the tablet including:
A. Three buttons at the top of the tablet give access to commonly used functions. All the buttons can be re-assigned in driver settings (see below). If you like to use short-cut keys, you may consider purchasing the optional Xencelabs Quick Keys (included in the Xencelabs Tablet Bundle). From left to right:
o Launch Settings o Adjust pen pressure levels opens settings page for pen pressure levels. o Switch displays for each press the tablet will be mapped to each of the displays attached to your system. If you only have one display attached, nothing will happen. B. Power switch slide and hold to turn on/off C. Kensington Nano lock slot D. Active area lights (brightness and color can be changed in settings) E. LED lights F. Working temperature-10-50 G. Frequency range2402MHz-2485MHz H. Bandwidth1MHz I. Transmitting power0dBm Figure 4 Next: Key Features of the Xencelabs Quick Keys Return to top SECTION 6: Key Features of the Xencelabs Quick Keys If you bought the bundle, the package will also include the Xencelabs Quick Keys. This is a device that adds up to 40 short-cut keys as well as a dial with 4 different modes per application. During driver installation you will have had the opportunity to set the main defaults for your device. Settings will give you many more options which you can set. Here are the main features of the Xencelabs Quick Keys:
A. Dial. This is used for functions like zoom or brush size. You can select up to 4 different modes per application. The color ring can also be set for each mode. You can also adjust the brightness. B. The OLED display. Shows the current setting for each key. You can change what is displayed in settings. You can also change the brightness of the display. C. Power button. Slide to turn on the Quick Keys. After a certain period of time of inactivity, the Quick Keys will go to sleep. You can adjust this sleep time in settings. D. Eight buttons. These can be set as desired per application. E. Set button. With this button you can toggle between up to 5 sets of buttons per application giving a total of 40 short-cuts. You can disable sets if they are not needed. Common usage is to group your workflow activities into sets e.g. sketching, coloring, editing. F. USB port. Used to charge the battery and/or connect to the computer. G. Kensington Nano lock slot Need a diagram of the Quick Keys Next: Product Registration Return to top SECTION 7: Product Registration Blurb around Registration and Account Setup. Fields to be filled in also The registration page will be a pop-up window, and when completed and closed, it will drop them back off at the Getting Started page. 1. The customer will be asked to register their tablet 2. They will be asked to enter in some key information a. Contct info b. Tablet info and serial number c. A few questions about how they will be using the tablet d. Phase two will include Software link(s) that the customer can download Next: Tutorial Videos Return to Top This page not for translation. See Mike McBride for details of registration page. SECTION 8: Video Tutorials Embed 3-4 tutorial videos here (to be created). Next: More Resources Return to Top SECTION 9: More Resources There are many other places you can get more information and help. Please visit the following Frequently asked questions (open new page) This is a list of questions that are frequently asked by our customers. They cover a variety of topics from how to buy a product through to technical question. The list is regularly updated. Support page Our support page offers a variety of services including how to contact support, download the latest driver and other resources. Community Forum Our community forum is an area that is monitored by our support staff. You can post ideas, tips and tricks or questions here which may also be answered by other customers. Our team as well as guest artists, frequently write blogs on a many interesting topics. Blogs Return to top Xencelabs Quick Keys Setup SECTION: Quick Keys Thank You We appreciate you choosing Xencelabs. We spent countless hours with professional artists to co-design the details of the Xencelabs Quick Keys. As a result, we included more buttons for those artists who want to have easy access to a lot of short-cuts. With the Quick Keys you can have up to 5 sets of 8 buttons making a total of 40 per application. We know that is a lot of buttons, so to help you remember them, we also included an OLED display that shows the function assigned to each button. We also included a physical dial which is natural and easy to use. We also added a colored light ring underneath the dial to help you remember which setting is active. You can adjust the color and brightness in Settings (you can even turn it off if you prefer). The Quick Keys will turn off to save battery if it is not being used for a while and something that was important to many of our testers was the ability to change the sleep time. We made this easy to do in Settings. At the center of it all are the advances in the driver. With its modern and attractive interface, you can easily configure your Quick Keys in a way that works best for you. Have fun exploring. We cant wait to see what you create!
Best regards The Xencelabs Team. SECTION: Quick Keys Navigation Install the driver 1. Box contents 2. Connecting the Quick Keys 3. 4. Charging the Quick Keys 5. Key features of the Quick Keys 6. Pairing the Quick Keys with the Tablet dongle (optional) 7. Product Registration 8. Tutorial videos 9. More resources SECTION 1: Quick Keys Box Contents Diagram of Quick Keys Box Contents In the box you will find:
Xencelabs Quick Keys Remote Wireless dongle USB cable Carrying case Sticker Warranty card Thank you note Next: Connecting the Quick Keys Return to top If any of these items are missing, please contact the Support Team using this link. They will send you the missing items. SECTION 2: Connecting the Xencelabs Quick Keys You can use the Xencelabs Quick Keys with a USB wired connection or over wireless. Note that you should connect the tablet before trying to install the driver. If you bought the bundle, you should also connect the Xencelabs Quick Keys before installing the driver. Connecting the Xencelabs Quick Keys with a USB Cable To use with a USB connection or to charge the Quick Keys, connect the provided USB cable to the Quick Keys and to a USB-A port on a computer (Figure 1). You can connect it to a USB hub, but it must be a powered hub. To charge the Quick Keys you need a USB port with at least 5 volts with 1.5 amps. It will take approx. 2 hours to fully charge. When you connect the Quick Keys by USB and the computer is powered on, the Quick Keys will turn on automatically. Need graphic here Need to update this for the Quick Keys Connecting Wirelessly You can connect the Xencelabs Quick Keys wirelessly with the provided dongle which establishes a wireless connection between the computer and the Quick Keys. If you already have a Xencelabs Pen Tablet you can pair the Quick Keys with the dongle that came with your Tablet. A single dongle will connect both the tablet and the Quick Keys. See here for how to pair your Quick Keys with the Tablet dongle. When fully charged, the Quick Keys wireless connection should give you up to 32 hours of continuous use. Next Install the driver Return to top SECTION 3: Install the driver The Xencelabs Quick Keys will NOT work without a driver. To use it, you must download and install the driver. If you have already installed a driver for the Xencelabs Pen Tablet, the same driver will work for the Quick Keys and you do not have to do it again. If you have purchased a Xencelabs Pen Tablet but have not yet installed it, please follow the instructions for the Pen Tablet here Otherwise, visit the support section of the Xencelabs website and select the latest driver for the Xencelabs Quick Keys. You will find options for Windows, Mac and Linux. You should download this driver to your computer, run it and follow the instructions on the screen. Important note: make sure you connect the Quick Keys before installing the driver in order to be guided through important customization options during setup. After installing the driver return to this page (you can keep it open while you install the driver). Next: Charging the Xencelabs Quick Keys Return to top SECTION 4: Charging the Quick Keys To charge the Xencelabs Quick Keys, connect it to a powered-on PC, a powered USB hub or other USB charger (Figure x below). The Quick Keys needs a USB port with 5v and 1.5 amps. To use the Quick Keys over a wireless connection you should make sure it is sufficiently charged. When fully charged, the Quick Keys will give you around 15 hours of continuous use. The driver will give you an indication of tablet charge level. You can also see if the Quick Keys is charging by looking at the power LED. Need a diagram similar to the one for the tablet Next: Key features of the Quick Keys Return to top SECTION 5: Key Features of the Quick Keys The Xencelabs Quick Keys is a device that adds up to 40 short-cut keys as well as a dial with 4 different modes per application. During driver installation you will have had the opportunity to set the main defaults for your device. Settings will give you many more options which you can set. Here are the main features of the Xencelabs Quick Keys:
A. Dial. This is used for functions like zoom or brush size. You can select up to 4 different modes per application. The color ring can also be set for each mode. You can also adjust the brightness. B. The OLED display. Shows the current setting for each key. You can change what is displayed in settings. You can also change the brightness of the display. C. Power button. Slide to turn on the Quick Keys. After a certain period of time of inactivity, the Quick Keys will go to sleep. You can adjust this sleep time in settings. D. Eight buttons. These can be set as desired per application. E. Set button. With this button you can toggle between up to 5 sets of buttons per application giving a total of 40 short-cuts. You can disable sets if they are not needed. Common usage is to group your workflow activities into sets e.g. sketching, coloring, editing. F. USB port. Used to charge the battery and/or connect to the computer. G. Kensington Nano lock slot Need a diagram of the Quick Keys Next: Pairing the Quick Keys with the Tablet dongle (optional) Return to top SECTION 6: Pairing the Quick Keys with the Tablet dongle (optional) If you already have a Xencelabs Pen Tablet you can pair it with the dongle that came with your tablet. Each dongle can have up to 2 Quick Keys and 1 tablet attached. Instructions on how to pair Next: Product Registration Return to Top SECTION 7: Product registration Same content as for Tablet Next: Tutorial Videos Return to Top SECTION 8: Tutorial videos Insert 2 or three videos about the Quick Keys here Next: More resources Return to Top SECTION 9: More Quick Keys Resources Content same as for Tablet section Return to top