WARNING
TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO
OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF
IN FIRE OR WATER
AMBIENT TEMPERATURE MUST NOT EXCEED 60
MAY EXPLODE IF DISPOSE IN FIRE
DISPOSE USED BATTERIES ACCORDING TO USER MANUAL
USE SPECIFIED CHARGER ONLY
FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
(On manufacturer’s company letter heading)
EU Declaration of Conformity (DoC)
Hereby we,
Name of manufacturer:
Address:
Zip code & City:
Country:
Telephone number:
Product description:
Type designation(s):
Trademark:
Batch / Serial number:
declare that this DoC is issued under our sole responsibility and that this product:
Object of the declaration (further identification of the radio equipment allowing traceability; it may include a color
image for the identification of the radio equipment):
……[Model: The device is , it supports XXX functions. For more details, pls refer to the user manual.]……
is in conformity with the relevant Union harmonization legislation:
Radio Equipment directive: 2014 / 53 / EU
and other Union harmonization legislation where applicable:
with reference to the following standards applied:
The Notified Body XXXX Engineering, Inc., with Notified Body number XXXX performed:
[choose applicable Modules: B+C]
Where applicable:
The issued EU-type examination certificate: [XXXXXXXXX]
Description of accessories and components, including software, which allow the radio equipment to operate as
intended and covered by the DoC:
Hardware Revision:
Accessorise:
Software Revision:
.…………………………………………………………………………………………………………
Signed for and on behalf of:
_________________________
Place and date of issue
______________________________
Name, Function, signature
EU regulatory conformance：：
RF exposure information: The EIRP power of the device at maximal case is below the exempt
condition, 20mW specified in EN62479: 2010. RF exposure assessment has been performed to
prove that this unit will not generate the harmful EM emission above the reference level as
specified in EC Council Recommendation(1999/519/EC).
Getting Started:
Please select the product you want to set up:
Xencelabs Pen Tablet (including Xencelabs Pen Tablet Bundle)
Xencelabs Quick Keys only
If you are already familiar with the product and just want to download and install the driver,
please visit the driver page
SECTION: Thank you
We appreciate you choosing Xencelabs. We spent countless hours with professional artists to co-design
the details of this tablet. As result, two pens are provided to accommodate different hand sizes and
personal preferences. We’ve made innovations in our pen pressure technology so you can draw with the
lightest of touch. If you prefer a heavier touch you can easily adjust it in settings. We believe these pens
to be the most sensitive on the market.
We also scrutinized over the right amount of surface friction (or “tooth”) to give a great drawing
experience. Some improvements are more subtle like the seamless transition between the active area
and palm rest which makes the tablet more comfortable to use.
At the center of it all are the advances in the driver. With its modern and attractive interface, you can
easily configure your tablet and pens in a way that works best for you.
Have fun exploring. We can’t wait to see what you create!
Best regards
The Xencelabs Team.
SECTION: Navigation
1. Box contents
2. Connecting the tablet
3.
Install the driver
4. Charging the tablet
5. Key features of the tablet
6. Key features of the Quick Keys (Bundle only)
7. Product Registration
8. Tutorial videos
9. More resources
Next: Tablet Box Contents
SECTION 1: Tablet Box Contents
In the box are:
Xencelabs Pen Tablet (SKU: BPH1212W-A)
Thin pen
3 Button pen
USB cord
Pen case with nibs and nib puller
Carrying case
Dongle for wireless connection
USB A to USB C adapter
Drawing glove
Warranty sheet
Thank you and Quick Setup card
Xencelabs sticker
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Next: Connecting the Tablet
Return to top
If any of these items are missing, please reach out to the Support Team using this link. They will
be happy to send you the missing items.
SECTION 2: Connecting the Tablet
You can use the tablet with a USB wired connection or over wireless. Note that you should
connect the tablet before trying to install the driver. If you bought the bundle, you should also
connect the Xencelabs Quick Keys before installing the driver.
Connecting the Tablet (and Quick Keys) with a USB Cable
To use with a USB connection or to charge the tablet, connect the provided USB cable to the
tablet and to a USB-A port on a computer (Figure 1). You can connect it to a USB hub, but it
must be a powered hub.
When you connect the tablet by USB and the computer is powered on, the tablet will turn on
automatically.
If you bought the Bundle, please connect the Xencelabs Quick Keys via USB cable in the same
way as the tablet.
Figure 1
Connecting Wirelessly
You can connect the tablet wirelessly (Figure 2) with the provided dongle which establishes a
wireless connection between the dongle and the tablet. We have provided an USB-A to USB-C
adapter if you need it. If you bought the bundle with the Xencelabs Quick Keys, the single
dongle will connect both the tablet and the Quick Keys.
When fully charged the wireless connection should give you a full day of continuous use.
Figure 2
Next: Install the Driver
Return to top
SECTION 3: Install the Driver
While the tablet will detect the pen location without a driver, to get the full functionality of the
tablet we strongly recommend that you download and install the driver. Note that to install the
driver you may need a user account that has admin rights.
Visit the support section of the Xencelabs website and select the latest driver for the Xencelabs
Pen Tablet Medium. You will find options for Windows, Mac and Linux.
You should download this driver to your computer, run it and follow the instructions on the
screen.
Important note: make sure you connect the tablet (and the Quick Keys if you bought the
bundle) before installing the driver. The installation wizard will only work properly if it can see
your devices during setup.
After installing the driver return to this page (you can keep it open while you install the driver).
Next: Charging the tablet
Return to top
SECTION 4: Charging the Tablet
To charge the tablet (and the Quick Keys if you bought the bundle), connect it to a powered-on
PC, a powered USB hub or other USB charger (Figure 3).
To use the tablet over a wireless connection you should make sure the tablet is sufficiently
charged. When using a 5 volt 1.5 amp power supply, the tablet will take approximately 3 hours
to fully charge and will last around 11 hours of continuous use.
The driver will give you an indication of tablet charge level. You can also see if the tablet is
charging by looking at the power LED. The Quick Keys, if you bought the bundle, has similar
LEDs.
Figure 3
Next: Key Features of the Tablet
Return to top
SECTION 5: Key Features of the Tablet
Figure 4 shows the key features of the tablet including:
A. Three buttons at the top of the tablet give access to commonly used functions. All the
buttons can be re-assigned in driver settings (see below). If you like to use short-cut
keys, you may consider purchasing the optional Xencelabs Quick Keys (included in the
Xencelabs Tablet Bundle).
From left to right:
o Launch Settings
o Adjust pen pressure levels – opens settings page for pen pressure levels.
o Switch displays – for each press the tablet will be mapped to each of the displays
attached to your system. If you only have one display attached, nothing will
happen.
B. Power switch – slide and hold to turn on/off
C. Kensington Nano lock slot
D. Active area lights (brightness and color can be changed in settings)
E. LED lights
F. working temperature：-10℃-50℃
G. Frequency range：2400MHz-2483.5MHz
H. Bandwidth：1MHz
I.
Transmitting power：0dBm
Figure 4
Next: Key Features of the Xencelabs Quick Keys
Return to top
SECTION 6: Product Registration
Blurb around Registration and Account Setup. Fields to be filled in also
The registration page will be a pop-up window, and when completed and closed, it will drop
them back off at the Getting Started page.
1. The customer will be asked to register their tablet
2. They will be asked to enter in some key information
a. Contct info
b. Tablet info and serial number
c. A few questions about how they will be using the tablet
d. Phase two will include Software link(s) that the customer can download
Next: Tutorial Videos
Return to Top
SECTION7: Video Tutorials
Embed 3-4 tutorial videos here (to be created).
Next: More Resources
Return to Top
SECTION 8: More Resources
There are many other places you can get more information and help. Please visit the following
Frequently asked questions (open new page)
This is a list of questions that are frequently asked by our customers. They cover a
variety of topics from how to buy a product through to technical question. The list is
regularly updated.
Support page
Our support page offers a variety of services including how to contact support,
download the latest driver and other resources.
Community Forum
Our community forum is an area that is monitored by our support staff. You can post
ideas, tips and tricks or questions here which may also be answered by other customers.
Our team as well as guest artists, frequently write blogs on a many interesting topics.
Blogs
Return to top