WARNING
TO REDUCE THE RISK OF BURNS OR FIRE; DO NOT ATTEMPT TO
OPEN,DISASSEMBLE,CRUSH,PUNCTURE,SHORT EXTERNAL CONTACTS OR DISPOSE OF
IN FIRE OR WATER
AMBIENT TEMPERATURE MUST NOT EXCEED 60
MAY EXPLODE IF DISPOSE IN FIRE
DISPOSE USED BATTERIES ACCORDING TO USER MANUAL
USE SPECIFIED CHARGER ONLY
FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
(On manufacturer’s company letter heading)
EU Declaration of Conformity (DoC)
Hereby we,
Name of manufacturer:
Address:
Zip code & City:
Country:
Telephone number:
Product description:
Type designation(s):
Trademark:
Batch / Serial number:
declare that this DoC is issued under our sole responsibility and that this product:
Object of the declaration (further identification of the radio equipment allowing traceability; it may include a color
image for the identification of the radio equipment):
……[Model: The device is , it supports XXX functions. For more details, pls refer to the user manual.]……
is in conformity with the relevant Union harmonization legislation:
Radio Equipment directive: 2014 / 53 / EU
and other Union harmonization legislation where applicable:
with reference to the following standards applied:
The Notified Body XXXX Engineering, Inc., with Notified Body number XXXX performed:
[choose applicable Modules: B+C]
Where applicable:
The issued EU-type examination certificate: [XXXXXXXXX]
Description of accessories and components, including software, which allow the radio equipment to operate as
intended and covered by the DoC:
Hardware Revision:
Accessorise:
Software Revision:
.…………………………………………………………………………………………………………
Signed for and on behalf of:
_________________________
Place and date of issue
______________________________
Name, Function, signature
EU regulatory conformance：
RF exposure information: The EIRP power of the device at maximal case is below the exempt
condition, 20mWspecified in EN62479: 2010. RF exposure assessment has been performed to
prove that this unit will not generate the harmful EM emission above the reference level as
specified in EC Council Recommendation(1999/519/EC).
Xencelabs Quick Keys Setup
SECTION: Quick Keys Thank You
We appreciate you choosing Xencelabs. We spent countless hours with professional artists to co-design
the details of the Xencelabs Quick Keys. As a result, we included more buttons for those artists who
want to have easy access to a lot of short-cuts. With the Quick Keys you can have up to 5 sets of 8
buttons making a total of 40 per application. We know that is a lot of buttons, so to help you remember
them, we also included an OLED display that shows the function assigned to each button.
We also included a physical dial which is natural and easy to use. We also added a colored light ring
underneath the dial to help you remember which setting is active. You can adjust the color and
brightness in Settings (you can even turn it off if you prefer). The Quick Keys will turn off to save battery
if it is not being used for a while and something that was important to many of our testers was the
ability to change the sleep time. We made this easy to do in Settings.
At the center of it all are the advances in the driver. With its modern and attractive interface, you can
easily configure your Quick Keys in a way that works best for you.
Have fun exploring. We can’t wait to see what you create!
Best regards
The Xencelabs Team.
SECTION: Quick Keys Navigation
Install the driver
1. Box contents
2. Connecting the Quick Keys
3.
4. Charging the Quick Keys
5. Key features of the Quick Keys
6. Pairing the Quick Keys with the Tablet dongle (optional)
7. Product Registration
8. Tutorial videos
9. More resources
SECTION 1: Quick Keys Box Contents
Diagram of Quick Keys Box Contents
In the box you will find:
Xencelabs Quick Keys Remote
Wireless dongle
USB cable
Carrying case
Sticker
Warranty card
Thank you note
Next: Connecting the Quick Keys
Return to top
If any of these items are missing, please contact the Support Team using this link. They will send
you the missing items.
SECTION 2: Connecting the Xencelabs Quick Keys
You can use the Xencelabs Quick Keys with a USB wired connection or over wireless. Note that
you should connect the tablet before trying to install the driver. If you bought the bundle, you
should also connect the Xencelabs Quick Keys before installing the driver.
Connecting the Xencelabs Quick Keys with a USB Cable
To use with a USB connection or to charge the Quick Keys, connect the provided USB cable to
the Quick Keys and to a USB-A port on a computer (Figure 1). You can connect it to a USB hub,
but it must be a powered hub. To charge the Quick Keys you need a USB port with at least 5
volts with 1.5 amps. It will take approx. 2 hours to fully charge.
When you connect the Quick Keys by USB and the computer is powered on, the Quick Keys will
turn on automatically.
Need graphic here
Need to update this for the Quick Keys
Connecting Wirelessly
You can connect the Xencelabs Quick Keys wirelessly with the provided dongle which
establishes a wireless connection between the computer and the Quick Keys.
If you already have a Xencelabs Pen Tablet you can pair the Quick Keys with the dongle that
came with your Tablet. A single dongle will connect both the tablet and the Quick Keys. See
here for how to pair your Quick Keys with the Tablet dongle.
When fully charged, the Quick Keys wireless connection should give you up to 32 hours of
continuous use.
Next Install the driver
Return to top
SECTION 3: Install the driver
The Xencelabs Quick Keys will NOT work without a driver. To use it, you must download and
install the driver.
If you have already installed a driver for the Xencelabs Pen Tablet, the same driver will work for
the Quick Keys and you do not have to do it again.
If you have purchased a Xencelabs Pen Tablet but have not yet installed it, please follow the
instructions for the Pen Tablet here
Otherwise, visit the support section of the Xencelabs website and select the latest driver for the
Xencelabs Quick Keys. You will find options for Windows, Mac and Linux.
You should download this driver to your computer, run it and follow the instructions on the
screen.
Important note: make sure you connect the Quick Keys before installing the driver in order to
be guided through important customization options during setup.
After installing the driver return to this page (you can keep it open while you install the driver).
Next: Charging the Xencelabs Quick Keys
Return to top
SECTION 4: Charging the Quick Keys
To charge the Xencelabs Quick Keys, connect it to a powered-on PC, a powered USB hub or
other USB charger (Figure x below). The Quick Keys needs a USB port with 5v and 1.5 amps.
To use the Quick Keys over a wireless connection you should make sure it is sufficiently charged.
When fully charged, the Quick Keys will give you around 15 hours of continuous use.
The driver will give you an indication of tablet charge level. You can also see if the Quick Keys is
charging by looking at the power LED.
Need a diagram similar to the one for the tablet
Next: Key features of the Quick Keys
Return to top
SECTION 5: Key Features of the Quick Keys
The Xencelabs Quick Keys is a device that adds up to 40 short-cut keys as well as a dial with 4
different modes per application.
During driver installation you will have had the opportunity to set the main defaults for your
device. Settings will give you many more options which you can set.
Here are the main features of the Xencelabs Quick Keys:
A. Dial. This is used for functions like zoom or brush size. You can select up to 4 different
modes per application. The color ring can also be set for each mode. You can also adjust
the brightness.
B. The OLED display. Shows the current setting for each key. You can change what is
displayed in settings. You can also change the brightness of the display.
C. Power button. Slide to turn on the Quick Keys. After a certain period of time of inactivity,
the Quick Keys will go to sleep. You can adjust this sleep time in settings.
D. Eight buttons. These can be set as desired per application.
E. Set button. With this button you can toggle between up to 5 sets of buttons per
application giving a total of 40 short-cuts. You can disable sets if they are not needed.
Common usage is to group your workflow activities into sets e.g. sketching, coloring,
editing.
F. USB port. Used to charge the battery and/or connect to the computer.
G. Kensington Nano lock slot
H. working temperature：-10℃-50℃
I.
J. Bandwidth：1MHz
K. Transmitting power：0dBm
Frequency range：2402MHz-2483.5MHz
Need a diagram of the Quick Keys
Next: Pairing the Quick Keys with the Tablet dongle (optional)
Return to top
SECTION 6: Pairing the Quick Keys with the Tablet dongle (optional)
If you already have a Xencelabs Pen Tablet you can pair it with the dongle that came with your
tablet. Each dongle can have up to 2 Quick Keys and 1 tablet attached.
Instructions on how to pair
Next: Product Registration
Return to Top
SECTION 7: Product registration
Same content as for Tablet
Next: Tutorial Videos
Return to Top
SECTION 8: Tutorial videos
Insert 2 or three videos about the Quick Keys
here
Next: More resources
Return to Top
SECTION 9: More Quick Keys Resources
Content same as for Tablet section
Return to top