FCC ID: 2AVHP-VPIXEL-S VPIXEL Phantom Wireless audio and video transceiver system

VPIXEL Phantom User Quick Guide Wireless audio and video transceiver system 1. Equipment List Check list according to your device category Name Parts list and quantity Standard Deluxe 1 1 1

1

1 2 2 2 1 2 1 1 1 1 1 1 3 3 Vpixel_S Vpixel_R Transmitter HDMI adaptor Transmitter VGA adaptor Transmitter DP adaptor Transmitter mini DP adaptor Receiver HDMI adaptor Receiver VGA adaptor Power Adaptor Battery USB power cord 2 indicate light adaptor Power connector battery connector

(Host-side) Battery connector

(battery side) 2. Devices Details Infrared window Lock key

(Vpixel_S Configuration only ) Switch key

(Vpixel_S Configuration only ) Battery charge connector Battery power button Power indicator light 3 Picture2-1Main device Picture2-2 Battery 3. Instruction of Usage 3.1. Install the adaptor Select the corresponding adaptor according to the connection port requirement, and install the adaptor to the Vpixel_S and Vpixel_R respectively. Picture3-1Install the connector Comments 1.No mixed use of Vpixel_S adaptor and Vpixel_R adaptorVpixel_S adaptor is circle in orangeVpixel_R adaptor is circle in blue. 2. Via choosing different adaptors to match HDMIVGADP or Mini DP interface. 3.2. Connect Device 1. The Vpixel_S connects to the display output interface of computer(or others single source), Vpixel_R connect to the input interface of display device. 4 Picture3-2connect computer 2. Vpixel_S via Lightning Digital AV Adapter connect lightning interfaceachieving wireless display to iPhone or iPad devices.Lightning Digital AV Adapter is Apple's official accessoryit needs an extra purchase. Picture3-3connect iPhone 5 3.3. Connect power source 1. Supply power to Vpixel_S and Vpixel_R via installing battery, and the battery can be used by multiple stacking because of its modular design. Picture3-4 install battery 2. Battery needs to be taked out and to be charged. Also, it can be multiple stacking charged. There is no charging while the battery is working. Picture3-5 battery charging 6 3. Connecting to the power adapter, it can supply power to the Vpixel_S and Vpixel_R as well. Picture 3-6connect power adaptor Comment:

The power supply capacity of the USB interface equipment such as projector/hd can't meet the demand of VPIXEL phantom main equipment, so please do not connect the power cord to the USB interface, and use the power adapter to meet the requirement of power supply. 3.4. Boot and Usage After power on the battery or connecting the power adapter, the Vpixel_S and the Vpixel_R will boot automatically. The boot screen and the searching screen will be displayed by the display terminal until the connection is accomplished. If the panel indicator light is green, it means the connection is complete and it starts to After the end of use, unplug the battery directly or disconnect the adapter power operate normally. to power off. 7 4. More functions 4.1. Lock and Switch screen The lock screen function can be enabled by pressing the lock screen button when the equipment works normally. At the same time, "Locked Screen" will be shown on the display screen. To restore the normal display by pressing the lock button again. This product supports the multi-user scenarios that a Vpixel_R works with the several Vpixel_S. Under this circumstance, the connection of one of the Vpixel_S and the Vpixel_R is normal while the other Vpixel_S are in a waiting It only needs to press the "switch key" of the Vpixel_S and the display terminal will switch to the signal source image which is connected to the Vpixel_S. It supports up to 8 Vpixel_S. 4.2. Hibernate and Awake The Vpixel_R will be in a hibernate status if there is no signal access after 15 minutes and the Vpixel_R indicator light will be off, the HDMI output will be When the Vpixel_R is in a hibernate status, only the wireless module keeps working. If any Vpixel_S or mobile connecting is detected, the Vpixel_R will be awake from the hibernate and restore to the normal state. state. closed. 8 4.3. Match All the products are matched in set in our factory. It needs a matching operation only if you purchase a launcher separately or need to change the match status of the products. You can accomplish the matching operation by following the procedures below. Starting up and execute the matching. First aim the Vpixel_S infrared window at the Vpixel_R infrared window, and long press the "switch key" for 3 seconds. Then it will goes into a matching status if the blue lights of the Vpixel_S and the Vpixel_R flicker simultaneously. The Vpixel_S and Vpixel_R panel indicator lights turn into green, it means the match is successful and the signal source image will be shown on the display terminal screen. 4.4. Connect with Android phones VPIXEL Phantom wireless audio and video transceiver system supports android smart phones and tablets. Turn on the mobile phone or tablet which needs to be projected, find the wireless display options, turn on the wireless display switch, search for VPIXEL phantom Vpixel_R and connect. The mobile phone screen will synchronize displayed on a display device. Vpixel_R name will be shown in the lower left corner of the searching or locked interface, and it can be checked by switching the lock screen key. 9 Picture4-1connect to android phone Comments:

1. The Android version must be above 4.4 and it must have a Miracast function and support 5G Wi-Fi frequency range. 2. If the effect of the mobile projection screen is not good enough, please disconnect all automatic Wi-Fi and try again. 10 There are differences names of wireless display function between the different mobile phones. The common names such as: Multi-screen interaction, Miracast, WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, WIFI direct connect, Share screen, Media outputScreen Mirror, etc. Attachment: Common mobile phone brand wireless display function set path

(for reference) No. Mobile brand Reference Path 1 HUAWEI Pull-down Menu-switch-multi-screen interaction 2 MI Setting- other connection mode-wireless display 3 OPPO Setting-more - WLAN display Setting- multi-screen interaction-open setting 4 VIVO Setting-more setting- WLAN display 5 ZET-T Setting-display-Projection screen 6 Meizu Setting-other connection mode-projection screen Letv Setting -more setting- WLAN display Coolpad Setting-WLAN- more-WiFi display Setting-system setting-WLAN-bottom- projection screen 9 Lenovo Setting- more WLAN display -WLAN same screen Setting - more WLAN display -WLAN display 10 Samsung Pull-down Menu-smart view-click device connect 7 8 11 5. Description of the status of hazardous substances in the products Component name Enclosure Mainboard Adapter Battery Charger USB standard. Hazardous Substance

(Pb)

(Hg)

(Cd)

(Cr6+)

(PBB)

(PBDE) O X X X X X O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O This form is prepared according to the provisions of SJ/T 11364 OThe content of this toxic and hazardous substance in all homogeneous materials in the component is required under the limit of GB/T 26572 XThe quantity of the toxic substances at least in one of the parts of the component exceeds the limit of GB/T 26572. Introductions The products shown in this table may contain these substances, but this information may be updated with the development of the technology. This product marked with "X" the reason is: at this stage there is no alternative technology and components, and conform to the state of the electric and electronic products hazardous substances restrictions on the use of measures for the administration regulations. The left image is a symbol of the environmental use of this model. Some of the replaceable parts may have a different period of environmental protection (for example, cell modules). This environmental protection term applies only to the conditions specified in the product manual 12 6. Q&A Q1No display on the display terminal?

A Please check whether the Vpixel_R battery is power on or whether the power adapter is well connected. Please check whether the Vpixel_R adapter is the proper one, and the display connects fine. Check if the display source has been switched to the correct display mode (HDMI or VGA mode, etc.) Q2Display terminal showsSearchingorwaiting for device connection A Check whether the Vpixel_S battery is power on or whether the power Check if the Vpixel_S and Vpixel_R is a match set, otherwise it needs to match adapter is well connected again according to the instruction book. Q3Display terminal shows No video signal input ACheck whether the Vpixel_S is properly connected to the computer or other Check whether the computer display mode is correct or not , do not set the mode Q4 If there is lag or screen blurred while projecting through the android A Please disconnect all automatic Wi-Fi and try again. source device

"computer only. phone 13 FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

connected. Radiation Exposure Statement This environment. between the radiator and your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. uncontrolled 20cm limits operated radiation be FCC should set with with equipment equipment minimum exposure complies installed distance forth This and for an

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AVHP-VPIXEL-S Label and Location VPIXEL Phantom Wireless audio and video transceiver system Model No.: Vpixel_S FCC ID : 2AVHP-VPIXEL-S Input: 5V 1A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size: L: 25mm*W: 25mm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

C5266091_X10_Ed.1 CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046

<2020-03-05>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AVHP-VPIXEL-S Vpixel_S For the product stated above, we request that the following information be held confidential;

Model name Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. 1/1 C5266091_X10_Ed.1

(Signed) Name / Title: Yan Nie / General manager Company: Xi'an VANXVM Electronics Technology Co.Ltd. Address: Room 302, 3rd Floor, No. 4 Workshop, 3G Smart Terminal Industrial Park, No. 8 Tangyannan Road, Xi'an,Shaanxi, 710065 China Phone: +86 029-81114919 Fax: +86 029-81114919 E-Mail: Tequila<tequila@vanxum.com>

Sincerely, 1/1

Room 302, 3rd Floor, No. 4 Workshop, 3G Smart Terminal Industrial Park, No. 8 Tangyannan Road, Xian VANXVM Electronics Technology Co.Ltd. Xi'an,Shaanxi, 710065 China 05/3/2020 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

matters. effect as acts of our own. Sincerely, We, Xian VANXVM Electronics Technology Co. Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AVHP-VPIXEL-S including the signing of all documents related to these Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862.

(Signed) Name / Title: Yan Nie / General manager Company: Xi'an VANXVM Electronics Technology Co.Ltd. Address: Room 302, 3rd Floor, No. 4 Workshop, 3G Smart Terminal Industrial Park, No. 8 Tangyannan Road, Xi'an,Shaanxi, 710065 China Phone: +86 029-81114919 Fax: +86 029-81114919 E-Mail: Tequila<tequila@vanxum.com>

Xian VANXVM Electronics Technology Co.Ltd. Room 302, 3rd Floor, No. 4 Workshop, 3G Smart Terminal Industrial Park, No. 8 Tangyannan Road, Xi'an,Shaanxi, 710065 China UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AVHP-VPIXEL-S

(1) DFS Device:

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) 5180-5240 5745-5825 Active Scanning

(the device can transmit a probe

(beacon)) Yes Yes No No passive scanning

(where the device is can listen only with no probes) No No Yes Yes

(3) Country code selection ability Yes If yes, pls explain how it was implemented:

No

(4) Meet 15.202 requirement Yes No pls check below :

Master N/A Client with Radar detection capability Client without radar detection capability, Ad Hoc Mode capability Access point capability Yes Yes No No Yes Yes No No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Yan Nie / General manager Company: Xi'an VANXVM Electronics Technology Co.Ltd. Address: Room 302, 3rd Floor, No. 4 Workshop, 3G Smart Terminal Industrial Park, No. 8 Tangyannan Road, Xi'an,Shaanxi, 710065 China Phone: +86 029-81114919 Fax: +86 029-81114919 E-Mail: tequila@vanxum.com