THE COMPOSITION OF PRODUCTS AND ACCESSORIES The following items are included in the packing box Storage bag User manual PASTE METHOD Massage Master In The Pocket Hosting Product User Manual Connecting wire Electrode slice
(A) Electrode slice
(B) Tear off of electrodes stickers Note:
Used for the first time, please open the battery cover
(Refer to the battery replacement), take out the battery. Take out the battery slot insulation piece, reload the battery into the host. Diagram of massage position Operation keys Bluetooth indicator light Control section Power section Accessory electrode slice
(2pair) CR2032battery
(2pcs) Battery Use Points for Attention Please correct installation pole of the battery Have run out of battery should be removed immediately, and change the new battery with the same model at the same time Please take out the battery when not in use for a long time(more than 3 months) Do not heat the battery, or thrown into the fire Please abide by the provisions of the local processing after use of the battery this product, Abandoned in accordance with the relevant environmental protection regulations of the city for process-
ing please Please do not use, store the product in the following places. The place of direct sunlight The place of high temperature and high humidity The places where there is water The dusty place The place near the fireworks The place of vulnerable to vibration impact The place of strong electromagnetic Pay attention to the dust when storage the electrode Electrodes with dust, will reduce the viscosi-
ty White sticker Shouldersand neck Waist Back Connection buckle Adhesive face Hand tear position Arm Leg TECHNICAL PARAMETERS Designation Power&Voltage Pulse Width Battery Life Input Current Massage Minimachine 2.2~3.3V(2032button battery) Under200us, error of +-10%
About 1 month(Continuous use 15 minutes a day) Mam:30mA in the strongest work mode Standby Power Consumption Max:10uA Output Voltage Rated Time 0~100V +-10%, 15 minutes Work Environment operating temperature: 0C~+45C; operating humidity: 10%-90%
Storage Environment storage temperature: -10C~+70C; Storage humidity: 10%-90%
Recovery Time 5s(aim at the electrodes shed when using) BLE Communication Distance In 10M(open air) Weight The host unit:19g(not contain battery and electrodes); host+box:77g(not contain battery and electrodes) Noumenon Dimention 38x10(mm) Box Dimention Operating Principle 120x66x22.5(mm) Use of muscle and nerve response to low frequency electric circulation make the skin surface weak low frequency current local auxiliary massage to the body Accessory Hosting product\storage bag\user manual\electrode slice(2pair)\CR2032battery(2pcs) USE MODE Mobil Control Mode Mobil APP control AFTER USING Please be sure to tidy up after poweroff and LED light off. Click the to open it Bluetooth lights flashing Open the phone APP applications Suspend the APP before shutdown Press and hold 1 second to turn it off Bluetooth lights out AUTO Mode break away from Mobil AUTO Mode during use transform to mode 1 Turn off automatically after work 15 minutes Double-click to open it Press and hold to turn it off After operation with Mobil control mode Work directly into automatic mode 2 levels of intensity during use Click the to open it Bluetooth lights flashing Products to suspend work APP Connect automatically BATTERY REPLACEMENT 4. Lock the battery cover 1. Confirm the power is turned off, the electrode slice gently removed from the skin Note:can hold the hand position reserved to take electrode 2. Take the original stickers back to electrodes 3. Put the Magic Touch stick into the storage bag ONE YEAR LIMITED WARRANTY This product promise users since the acquisition date, under normal use if the host appeared quality problem, free warranty for one year.The electrodes slice and the battery is consumables, is beyond the scope of the warranty Recommend to use batteryCR2032 Please be sure to turn off the power before switching Please replace the battery when battery flashes Battery life:about 1 month
(Continuous use 15 minutes a day) 1. Open the shell of host power supply 2. Remove the old battery Old New 3. +pole of the battery upwards, assembled battery ELECTRODE SLICE REPLACEMENT Please be sure to turn off the power before switching 1.Remove the electrode slice from the connection buckle 2.put the new electrode slice into the connection buckle FCC DISCLAIMER Caution: The user is cautioned that changes or modifica-
tions not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Long-term unused 1. Remove the battery 2. Use again, confirm that the LED lights This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. CARE AND MAINTENANCE Care and maintenance of electrode slice 1. Remove the electrode slice from host 2. Drip about 10 drops of water, clear the dirt with Finger abdomen do not use nails or brush do not soak in water do not wash, hang put do not use detergent 3. Dry moisture 4. The water vapour on the surface should be drying fully Do not use paper towel or rag to wipe paste Avoid direct sun The electrodes slice is consumables, if there are damage or dirt on surface of the paste, please change in time Care and maintenance of Host Please use the cloth with water or warm water to wipe the host Never use Thinner, Volatile Oil, Alcohol etc, or easy to cause adverse or partly damaged, color, etc Can not wash the product directly to the faucet NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.