Osakt Instruction Manual Model No. EC-624C. Before operating this unit, please read these instructions completely. Contents Before Use Safety Precautions a
+ FCC Radiation Exposure Statement 3 Chair Components ..
+ Bluetooth Speaker 5 Sotting up the massage chal... ee) ASSOMIY oe ceeeeeeete = 944 Preparation before Use 1546 How to Use Controller (Touch Pad) e : 17-18 Quick Start 1920 Automatic Course. Advanced Function
+ Basic Massage
+ Air Massage
* Special Position Setting. How to End Massage. 20-23 Q8A / Important Cleaning and maintenance Troubleshooting Grounding Instructions. Chair Specifications. Thank you for purchasing this Massage Chair. Before using your massage chair, please read the contents of this, Instruction manual and refer to it when needed. When using the massage char, basic precautions should always be followed to reduce the risk of electric shock, burns, fre or injury to persons. Please read the following precautions before using the massage chal. Make sure the power plug is securely inserted into a proper electrical outlet to reduce the risk of short-circuit and fire. is highly recommended that a surge protector is used to prevent from damage. DO NOT use the massage chair in areas where the humidity is high such as a sauna steam room, Pools, bathrooms, AC or heating vents, etc. DO NOT use the massage chair outdoors and avoid areas with direct sunlight. Ifthe chair is not being used, turn the power switch to the OFF position and unplug the massage chair from the electrical outlet to prevent any damages to the cchair when there are power outages/surges that may cause serious damage. Never plug/unplug the power cord plug socket with wet hands. Close and continuous supervision is necessary when the massage chair is used by, on or near children or disabled persons.
* No more than one person should use the massage chair at the same time. The massage chair is intended for use as described in the Instruction Manual. Dot not use any attachments other than those recommended by the manufacturer. DO NOT attempt to stand or sit on the backrest, armrest or footrest in order to prevent accident, injury or damage to the chair. Avoid falling asleep while using the massage chair. Always keep the massage chair clean, and never insert any objects into or around the gaps of the massage che
* DO NOT move the massage chair by pulling on the power supply cord. Make sure there are no children, pets or other obstacles behind or underneath the massage chair Ifyou find any rips or tears in the fabric of the massage chair contact the service department and stop using the chair immediately. This massage chair Is designed for household use and should not be used in non-residential settings. Safety Precautions Please consult your doctor If you are in doubt as to whether or not you should use this massage chair. Please consult a doctor before using the massage chair if you are pregnant, undergoing any medical treatment, using a medical electronic device such as a Pacemaker, or are experiencing any ofthe following: Malignant tumor, heart disease, back pain, abnormal or curved back bone, osteoporosis or acute lines. If you experience pain while using the massage chair, stop using the chair immediately and consult your doctor. Never use @ massage function on swollen or inflamed parts of the body. DO NOT use the massage chair for more than 30 minutes at atime. DO NOT use the massage chair where aerosol(spray) products are being used or where oxygen is being administered. This massage chair is a non-professional product designed to provide a comfortable massage and should not be substituted for appropriate medical treatment. Never operate the appliance with the air hoses that inflate while they are blocked. Keep the air openings free of lint, hair, and any other obstructions. Check the skin in contact with the heated area ofthe appliance frequently to reduce the risk of injury. Ifthe heating pad malfunctions and extreme heat Is. produced it may cause serious bums. Bums may result form improper use. If this Is the case immediately shut off the chair and unplug from the outlet
* Remove all sharp objects from the body and pockets such as keys and Pens. Keep children away from extended foot support (or other similar parts.) DO NOT WET-DO NOT USE PINS. NEVER REMOVE COVER. LX caution The user's weight is usually limited to 220 Ibs. When using the massage chair, the mechanism will stop for safety while there Is. too much pressure on itWhen that happens, please switch off the power and restart after 10 seconds. FCC Radiation Exposure Statement FCC Radiation Exposure Statement: (mobile device) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibily of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. FOC STATEMENT 1. This device complies with Part 15 ofthe FCC Rules. Operation is subject to the folowing two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation 2. Changes or modifications not expressly approved by the party responsible for Compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no uarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Rearient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, Consult the dealer or an experienced radio! TV technician for help Pilow Pad (2 Bluetooth Speaker (See Page 5)
@ Shoulder side massage section @ Backrest Pad Controler Stand @ Hand and arm massage section D Seat and thigh side massage section @ Seat
@ Legrest Chair Components Back 40 Controtter {) Side Panel 2 Backrest 43 Power Switch Section 44 Bluetooth Name Label Bluetooth Speaker NOTE:
The bluetooth speaker can only connects with one bluetooth device at a time. Please turn off your bluetooth device after using so that other users can enjoy itas well The bluetooth name label is on the right side of power switch on the electric control box. The naming rule of bluetooth name is MASSAGE CHAIR 000K. XXOOOK (MEX), 5 Setti 1. Installation Position.
+ Ensure there is adequate space to reciine. up the massage chi seas 7 atleast 72 Bl App 79"
+ Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of heating sources, because this can cause discoloration or hardening of the synthetic leather.
+ Place the unit on a mat to prevent floor damage.
+ When placing a mat under the unit, the size of the mat should be sufficient
(at least 52" x 32") to cover the areas where the unit touches and where the legrest could touch the floor, as shown in the diagram on the above.
+ Install the unit near a power outlet. Setting up the massage chi 2.Removing everything from the box and installing the unit.
* Confirm that the main unit and the accessories are in the box
+ Since the unit is very heavy, be careful to avoid back injures.
+ The unit must be cartied by two persons.
+ To put the unit down on the floor, do it siowly and carefully watch your step. Main unit 2 Spit Pin x3 Spacers4 AlonSorwx4 Balt x2
(9@xi8x2) (M25)
+The tools you may also use: ===) | Gross Screwdriver Assembly 1. Attaching the controller stand to the left side.
+ Fasten the controller stand with the attachment screws.(4 positions) Use 4 pes of attachment screws (M4x10). Align the holes of the side panel with the holes of the controller stand. Lot Side Panes | Controller Stand How to tighten the screws.
+ Putan attachment screw on the edge of the cross screwdriver and tighten the screw horizontally to the hole.
= + Tighten firmly with the cross screwdriver.
+ Screw may be damaged if you tighten the
(Gross serowsriver screw inserted into the hole crookedly Using an screwdriver. Assembly 2. Attaching the side panels.
@ Pull open the zipper at the bottom of side panel.
(2) Lean the side panel on the seat base, connect the wire and air hose.
@ Insert the protrusion into the groove, and push to the end. 10 Assembh
@ Press the armrest downwards while simultaneously pushing it towards the seat.
( Fasten two spacer (@6x18x2) and two allen screw (M6x25) with allen key. How totighton the allen screw.
+ Putan attachment allen sorew on the Alen seo edge ofthe allen key and tighten the
|| allen screw horizontally to the hole. CG + Tighten firmly with the allen key. var | Alen sorew may be damaged if you
|S" stenxey _Uohton the allen screw inserted into the hole crookedly using an allen key. Zip the synthetic leather of side panel wihch you unziped before. Repeat above steps to instal right side panel.
Assemblh 3. Attaching the legrest. 2) Align the connecting holes from the footrest and seat part. Insert bolt A and secure with split pin as demonstrated. Assembh 3) Lif the legrest to a horizontal position and align the connecting hole. Insert bolt B and secure with split pin as demonstrated. B Assembly 4. Connect the power cord to the unit and tum on the power.
+ Check for dirt and damage on appliance inlet ofthe power switch section and the connector ofthe power cord.
@ Insert the connector into the appliance inlet.
+ Be sure to push the connector in all the way. 2) Insert the power plug into the power outlet.
( Tum the switch to position. 5. Placing the controller. Insert the controller into the controler stand til the end. 4 Preparation before Use 4. Check the space around the product. Make sure there is no person, pet, or other object close to the product. 2. Make sure there is no foreign matter in the seams of the product.
+ Before siting on the product, make sure there is no foreign matter between any two parts oft.
+ Do not put hands, arms or head between the backrest and the back cover.
+ Do not put pets on the product (such as its back cover, backrest and armrests). 15 Preparation before Use 3. Power on the product
@ Push the power connector into the appliance inlet til the end.
(2 Insert the power plug into the power outlet til the end.
(3 Tum the switch to "I position 4, Make sure the massage rollers are retracted. Ifthey are not, press ON button to retum them to the retracting position. 16 How to Use Controller (Touch Pad) 4. ONOFF
+ Keep pressing this button for 1 second to activate the massage chair.
+ Keep pressing this button for 1 second again to stop all massage function, massage chair will return to its original position, 2. Automatic Course
+ When this icon is touched, the screen will change to [Auto Program] . SEE PAGE 20 to 22. 3. Advanced Funetion
+ When this icon is touched, the screen will change to [Advanced Function]. You can select any type of manual massage you want. SEE PAGE 23 to 26. 4. Position
+ When this icon is touched, the screen will change to [Position]. You can adjust the angle and length. SEE PAGE 26 to 27. 5. Setting When this icon is touched , the screen will change to [Setting]. SEE PAGE 27 10.28. 7 How to Use 6. Operation Display
+ Currently performing massage actions light up while massaging.
+ Currently selected actions light up when manual operation is selected. 7. Massage Area Display init copenaneaite + Currently selected air massage position flashes. maseoge pars Beit
+ Current air massage position light up. 8 How to Use Quick Start 4 41. Keep pressing the button for 4 second to tum on the power.
(The default setting on screen will show {Avid} after power on.) 2. Touch one of the icons to select the auto program ( For details, see page 201022.) Touch s@& to page down and to page up. 3. To adjust your preferences. Touch 2 to adjust the massage speed. Touch {to adjust the massage strength. Touch <2 to adjust the air massage intensity. Touch > to adjust the massage roller width. 19 How to Use 4.Touch 15 mn to adjust the duration for 20, 25, 30, 05, 10 or 15 minutes. s.toucn @ to pause tne massage tunctons. nd touch, to star again. 1 ie vin regain patin NOE, @ wir crange to @] when function is paused Automatic Course 41. Touch the Zut3) icon to enter {Automatic Course] interface. 2.Touch MF to page down and WH to page up. 20 How to Use 3. Ifany one of the 13 auto programs is activated, chair wil automatically performing a shoulder height scan. And the theme will go to shoulder asjustment automatically, user can manually adjust the shoulder height position to the desire comfortable position before auto program start. Then touch @ABB to confirm. Goneral
+ Full body massage with various massage techniques,ntending to relieve fatigue on full body, Deep Tissue
+ Standard course for thorough relaxation based onthe strong kneading and ultra ions. Recovery
* Focuse on waist and hips, massage with kneading and tapping, intending to promote detoxification. Wake Up
* Combine with kinds of tapping techniques for back, arm and leg to relax full body and wake you up. Sleoping
+ Gente relaxation course based on tapping actions helps you to fall asleep. Healthy Regimen
* Combine with various massage techniques for waist, hips and thigh, intending
{o shape a healthy body. 24 How to Use Stretching
+ Stretch the back muscles, hands and full body in which four stretching actions are repeated. Man Health
* The muscles around your lower back will be loosened by soft kneading and. strong tapping Woman Beauty
+ The muscles around your waist, hips and thigh will be loosened by kneading, rolling and shiatsu. Older Vitality
+ Specially designed for the aged, massage with soft kneading and soft tapping. Kidney Vigor
* Focuse on lower back and hips with all the massage techniques. Spleen Digest
+ The muscles between waist and lower back will be loosened by soft kneading and tapping. Timer 15 nn
+ Touch this Icon to adjust the duration for 20, 28, 30, 05, 10 or 15 minutes,
+ The number beside the icon shows the remaining time. Pause @ @
= When the chai in massage mode and user want temporary pause touch the con @ onda message uncon wil top, and the sete counksown be paused as well. Only the [ON/OFF] and [Pause] can be used. Touch to @} to immodtay coase the pasu uncon ad resume the anal massage function. The countdown continue. va cere o @ von pesram sin operten,
@ vit crance'o ven tncton i pause Note:
Speed ~
Touch this icon to adjust speed for Swedish, Tapping, Shiatsu and Clapping. 5 stage speed avaliable for adjustment. 2 How to Use Strength 9
* Touch this icon to adjust intensity of air massage.
+ 5 stage intensity available for adjustment. Width 30
* Touch this icon to adjust back roller width.
+ Itcan be used when Tapping, Shiatsu, Clapping or Rolling activated.
+ 3 stage width available for adjustment. Advanced Function 4. Touch the icon to enter [Advanced Function] interface. 2, Select function interface.
* Touch the' Icon to enter [Basic Massage] interface.
+ Touch the @) icon to enter (Air Massage] interface.
+ Touch the @) icon to enter [Special interface. 3, Touch and select any of the manual or alr functions you want. Basic Massage Kneading
+ Touch Kneading to activate the kneading function. Touch again to stop kneading function.
+ Kneading can be combined with tapping, shiatsu or clapping
+ Touch to adjsut strength for kneading 23 How to Use oe cates beeen romero
to adjsut speed for swedish. Tapping
+ Touch Tapping to activate he tapping function, Touch again o stop tapping nction.
+ Tapping can be combined with kneading.
+ Touch = to adjsut speed for tapping. Touch > to adjust tapping width. Shiatsu
* Touch Shiatsu to activate the shiatsu function. Touch again to stop shiatsu function
+ Shiatsu can be combined with kneading.
+ Shiatsu can be combined with kneading.
+ Touch =: to adjsut speed for shiatsu. Touch 00-to adjust Shiatsu width Clapping
+ Touch Clapping to activate the clapping function. Touch again to stop clapping function
+ Clapping can be combined with kneading.
+ Touch ~ 3 to adjsut speed for clapping. Touch 0 to adjust clapping width, Rolling
+ Touch Rolling to activate the rolling function. Touch again to stop roling function.
+ Touch 30 to adjust roling width. Spot
+ Touch this icon to select spot massage for any part on the back.
+ Touch once to activate spot massage while the original massage mode continues to run at the original position.
* Touch agnn fo cease spot massage function and resume ful back massage inction. Partial
+ Touch this icon to select partial massage for any part ofthe back.
+ This will keep the original massage mode working on a range of 3.2". Touch again to cease partial massage function and resume full back massage function How to Use
+ Press oF to choose position of back massage rolers.
+ Release the icon once the desired position is achieved. Air Massage Arm/CalvesiFoot/Seat Side/Shoulder & Lumbar
* Select the body part and touch the ican to select air massage position.
*Touch <> to adjust intensity of air massage. Full Air
* Touch this icon to activate full body air massage function.
+ This program applies full body part air massage. Touch << to adjust intensity of air massage How to Use LED
* Touch this icon once to tum on the biue light on speaker:Touch again to turn off ight. Foot Rollors
* Touch this icon once to activate roller massage on feet. Touch again to stop foot roller massage. Vibration
+ Touch this icon once to activate the seat vibration function. Touch again to stop seat vibration function. Heating
* Touch this icon once to activate the lumbar heating function. Touch again to stop the heating function.
+ Itis applicable during any automatic program, localised area program or manual program. Position Touch the Jf} icon to enter [Position] interface. Zero Gravity
* Tough his lon oacust the ange of te massage chair to zero gravity
+ Touch again to resume to original postion. How to Use
@ Backrest Reciinefinciine
* Touch the arrow icon to control rectine or incline angle of the chair.
+ When the desired position reach, touch icon again to stop the adjustment.
) Footrest Lift Drop
* Touch the arrow icon to lift or drop the footrest.
+ When the desired position reach, touch icon again to stop the adjustment.
@ Footrest Extension/Retraction Touch the arrow icon to contral the footrest extension or retraction.
+ When the desired position reach, touch icon again to stop the adjustment. Setting Touch the $F icon to enter [Setting] interface. Touch "Retum" to go back tomain page. Language Touch the icon to select the language you want. EN =Engiish TW Chingoe-Tatwan MID ES = Spanish Eapaneh Volce Use the icon to tun on or off touch tones. ar How to Use Background Brightness
+ Use the icons to adjust background brightness of screen. Auto-Lock
+ Use this iter to adjust auto-lock timer. How to end massage Press the ON/OFF button for 1 second to stop the massage operation.
+ Insert the controller back into the controller holder.
+ Massage rollers will reset automatically.
+ Switch the power button under the chair to "0" position and disconnect the ower cord plug. Cleaning and maintenance 1. Cleaning of the synthetic leather Wipe the synthetic leather with a soft dry cloth.
+ Do not clean the product with chemicals Such as thinners, gasoline and alcohol. When using a leather maintenance product
{cleaning cloth) sold on the market, follow its directions for use.
+ Ifthe synthetic leather is very dirty, wipe it with the method below.
@ Puta piece of sof cloth into water oF 3% to 5%
eta etrgent conned hot water and wing
(2 Wipe surface of the synthetic leather withthe soft oth.
(3) Wipe the detergent with apiece of cloth once soaked In clean water and wrung out.
@ Wie witha piece of wrung soft cloth.
|B Have the synthetic leather take natural air drying.
+ If itis difficult to remove the stains on the synthetic leather, soak a piece of melamine foam bought from the market into a neutral detergent and use It wipe the Product. Do not dry the surface by a hair drier.
+ Surface of the synthetic leather may be dyed by fabric colors; therefore, be careful when wiping the product with denim or colored cloth.
+ Synthetic leather may discolor, so the position in contact with the hair dye used should be covered by a towel. 2. Cleaning of the plastic parts 1) Puta piece of soft cloth into water or neutral detergent contained hot water, wring It out and wipe the plastic parts.
+ Do not clean the product with chemicals such as thinners. gasoline and econo 2) Wipe with a piece of cloth once soaked In clean water and wrung out
+ Wing the loth out before using it to wipe the omdle Sonal. (
3) Have the plastic parts take natural air sone ance Troubleshooting This page summarizes the most common problems you could encounter with the product. Ifyou are unable to solve the problem with the information below, Contact service center immediatly. If the problem encountered is not listed, please try the folowing suggestions:
4. Tum off the product and unplug it 2. Wait for 60 minutes. 3. Plug the product back to the recommended outlet and restart. 4. Ifthe problem persists, contact the authorized service center. Problem Possible Cause Suggestion Ensure the voltage on the The product | The products not plugged | product corresponds to the The produc focal mains volage and does not work | in property then plug in again Make sure the outlet is properly L working. The product | The product has just if you want another session, Tremont |Temtmaobne | eee ons tute working session and has. again. automaticaly switched to standby mode. The product | You may have used the -
coped product continuously for 45 Unplug the product and ltt pi ey minutes where the over heat, 000! down for 60 minutes rue wrate me before you use it again. civated. The product An excessive load has been Reduce the excessive load does not work applied on the product. and start again. The products Unplug the product an att The products likely to be abnormally cool dawn before using it warm everunedt again. This is normal and does not mean that the product is faulty. Noise canbe | Noise is made by the heard from the | mechanical parts of the 30 Grounding Instructions This product must be grounded. Ifit should matfunction or break down, grounding provides a path of least resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes. and ordinances. Danger-Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualfied electrician or service technician if the product will not fit the outlet, have a proper outlet installed by a qualified electrician. This product is for use on a nominal 120V circuit and has grounding plug that looks like that plug illustrated below. Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product. Grounded Outlet s s
. pijiri),y Grounded Outlet Box Grounding Pin 34 Chair Specifications Description Specifications Model No. OS-Pro Maxim Rated Voltage 110V~120V Rated Frequency 60Hz Rated Power Consumption | 220W Timer 5/10/18/20/25/30 minutes Max Time Rate 30 minutes Upright: 63.0x31.1"x45.3"
Dimensions(L x W x H) Reclined: 78.7%31.1x35.4"
Carton 1: 60.6x30.1x37.4"
Carton 2: 44.5x12.2x25.8"
Gross Weight: 2853 Ibs |
weet Net Weight: 236.5 Ibs-
Contr wie: 9.0"
Length of Wire Soa TE Envronment temperature: 109-40"
Hasge Condition Contrasting humidity: 30-85RH
| Storage temperature: 20-60"
aaa Storage humid: 30-86RH Safety Feature Equipped with overheated and power Publish:2016.06 v1.0