Bluetooth Scanner HS-M300 Instrucon Manual Pair with mobile 1. Long press the buon in the scanner to make the LED
(Green indicator will light) light up, then you can hear beep with vibraon. 2. Turn on the Bluetooth of mobile and the APP respecvely. Device Name: HPRT SCANNER Click the device name to make a paired connecon. Aer connected successfully, the scanner will make a beep and LED light up (Blue indicator), then it will enter into the seng interface. 3. It means the scanner has been connected successfully by compleng the above the steps. Test if the scanner can be used: enter the seng inter-
face of the APP, then scan the barcode with the scanner to check the receiving funcon. If it can receive data that means the pair is successfully; if not, re-pair accor-
ding to steps 1 and 2. Wireless transmission at a visible distance of 10 meters outdoors Support Win 8.1 or above, Win 10, Android device and iOS device. Buzzer Status Long beep: 1 me+ Vibraon Short beep: 1 me Short beep: 2 mes Short beep: 1 me+Vibraon LED Indicator Color Red light Green light Blue light Power ON / OFF Beeping mes Long press to turn on the scanner Connect to Bluetooth Disconnect Bluetooth and scan barcode without Bluetooth Scan barcode with Bluetooth Descripon During Charge Full charge, power on Connect to Bluetooth Power on: In the power o status, long press the buon for 2 seconds, it will make a long beep and vibraon that means the scanner is power on. Power o: In the power on status, long press the buon for 2 seconds, it will make a long beep and vibraon that means the scanner is power o. Note: the scanner will be shut down automacally if it is not used for more than 10 minutes. Support with APP 1. Sound Seng: set the sound ON and OFF with the APP. 2. LED Seng: set the lights on, ash and lights o for Blue-
tooth indicator by the light buon. 3. CRLF Seng: this seng can be used to add a carriage return line feed or cancel carriage return line feed at the end of the scan data. This seng supports power-o save. 4. Caps Lock Seng: with this seng, the English alphabet can be set to remain as it is or converted to caps lock. This seng supports power-o save. 5. Connous Scanning Mode: with this seng, the scanner can be set to ON and OFF by connous scanning mode. When the connous mode is turned on, press the buon to scan code. Aer the scan is successful, the scanning light will be turned on automacally and connue to scan the next barcode. You dont need to manually press the buon, unless it is automacally turned o without scanning the code for more than 10 seconds, then press the buon again to start scanning. Support with APP 6. Working Mode Seng: with this seng, the working mode of the scanner can be set to HID or GATT. Aer seng, the scanner will automacally shut down. When reconnecng, you need to delete the device of Bluetooth to reconnect. Scanning seng Note: The following scan sengs are required when Bluetooth is not connected. It can be set successfully aer the scanner open the seng mode rstly. Otherwise, the seng mode is o by default and cannot be scanned. Scanning seng 2 HID MODE 7. Restore Factory Sengs: Aer the restore factory be set, the working mode will be automacally set to HID mode.
(If the original is GATT mode, the scanner will be shut do-
wn. When reconnecng, you need to delete the device of Bluetooth to reconnect). It will set the characters remain as it is and the sound is set to ON automacally. 8. Switch Working Mode: when the scanner is not connect to Bluetooth, scan the corresponding barcode can be switched to the corresponding working mode. But you need to delete the device name in system Bluetooth to reconnect the scanner. 1.Mode ON/OFF Seng (Default OFF) 1 ON 2 OFF 2.Bluetooth Mode Conversion 1 GATT MODE 3.End Enter 1 OFF 2 ON Scanning seng 4.Connuous automac scanning 1 ON Scanning seng Scanning seng 2) ON, automac conversion to Capital leer 2) OFF 2 OFF 3) ON, automac conversion to Small leer 5.Automatic conversion of Capital/Small letter 1 Original 6.Buzzer seng 1 ON 7.Motor 1 ON 2) OFF Scanning seng 8.Temporary switch 1) ON 2) OFF 9.Restore factory sengs Execute restore factory sengs 10.Power o Execute power o Problems The Bluetooth scanner can not be connected to Andriod device?
Please make sure that the Android system support for BT, and its recommended to use 5.0 or above. After being paired, the barcode can not be upload to device?
Please conrm the working mode of the scanner. If it is in GATT mode, it needs to receive data in APP. If it is in HID mode, barcode data can be output as long as the input method can be input. The device can not search the scanner?
1. Make sure is power on. 2. Make sure the mobile version meets the requirement. 3. Conrm if the Bluetooth of the scanner is connected (the blue light is on), if connected, you need to disconnect the Bluetooth connecon from the connected device and rescan. How to connect to the mobile again if the Bluetooth scanner has been connected to mobile?
Open the Bluetooth searching interface of the APP to connect to the corresponding Bluetooth device. If the data received in HID mode is dierent from the original data?
Conrm the current input method is an English keyboard, and turn o the English word mode, the English associaon and the inial capitalizaon mode (depending on the dierent input methods). If not, download the Sogou input method and turn o the above mode before using the scanner. State Our company does not assume any responsibility for losses caused by natural disasters (such as earthquakes, oods, etc.) that exceed our scope of responsibility. In any case, our company does not assume any responsibility for losses caused by using this product, such as loss of prots, loss of reputaon, business interrupon, loss or change of stored data, and any special, unexpected, associated or inter-
mient losses caused by the above. Our company does not assume the responsibility for the losses caused by due to improper use of hardware or soware not specied by the our company . Our company does not provide any form of warranty or technical support for the informaon, data, les, other products, services obtained though the use of this product, and does not assume any responsibility for the use of above descripon by users. Our company are not take any form of guarantee for third-party soware used by this product. Due to the connuous improvement of the products, the operaon and common problems of the models described in the manual are mainly based on actual machines. And it may be changed without noce. FCC Warning This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including int-
erference that may cause undesired operaon. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help. Warning:
Changes or modicaons to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiaon Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condion without restricon.