Quick Start Guide HPRT Poooli L1/L2 HPRT Poooli L1/L2 USB
-1-
USB
-2-
ON/OFF
USB CCC
-3-
USB 5V/1A90 APP APP:
-4-
APP
-5-
APP Bluetooth 5.0 APP
-6-
-7-
1 2 3 1 2 3
-8-
-A22 PV C-A 22
-A
-A
-A
-9-
-10-
12 1 2 3 4 24 400-806-9290 Packing List HPRT Poooli L1/L2 Quick Start Guide Thermal Paper Roll USB Cable Note: The packing materials are actually based on the order.
-11-
Appearance Power button Parrot mouth accessory USB Port
-12-
Using Guide Power button status Long press 3 seconds to ON/OFF LightStandby / charging completed Slow ashCharging Fast ashSupplies near end, cover open, low battery and the print head is overheated. Charging Use it for the rst time after purchase Recommended to use after full charge. Can be charged using a phone adapter or connected to a computer.
-13-
USB Cable In addition to the dedicated charger, you can also use the charging cable of mobile device. Recommended to use a dedicated charging cable to charge. It takes about 90 minutes to charge with 5V/1A. Download APP Scan the QR code below and install the app:
-14-
Connection Welcome Add Device Enter Home Click the Connect Printer button. Enter the printer search page to select the corresponding printer from the list of printers found via Bluetooth.
-15-
APP Setting Bluetooth 5.0 Bluetooth pairing When the rst connection succeeds, the next time you start the application that will connect HPRT Poooli L1/L2 automatically. In the connection state, double click the power button to disconnect the connection. Simple operation APP setting You can view information such as remaining power, rmware versions in device management.
-16-
Disassembly Dismantle If you want to remove the parrot mouth accessory , please according to the step take them down. Install If you want to attach the parrot mouth accessory, use the magnet to adsorb the parrot mouth.
-17-
Replace Supplies Place direction Figure 1 Figure 2 Figure 3 Place Poooli as shown in gure 1, and look at the arrow. With reference to gure 2, push down the upper cover. When replacing supplies, place the supplies in reference to the direction shown in gure 3. If the supplies are properly placed, close the upper cover to the lower cover and push the upper cover back to its original shape. When changing supplies , do not touch the print head in case of ovweheating.
-18-
Ocal Supplies Types Thermal paper No bisphenol-A, saves photo for up to 22 years. Waterproof, oil-proof, anti-PVC, no bisphenol Three proongs
-A, saves photo for up to 22 years. Self-adhesive paper No bisphenol-A, with a sticky glue, no xed specications, free to set the print length Convenience No bisphenol-A, hasback glue, can be picked sticker as soon as axed. Continuous paper No bisphenol-A, has more sticky glue, does not have the xed specication, can be used as a variety of tag identication Thermal paper of HPRT Poooli L1/L2 is a special piece of paper. If the machine failure caused by the use of other paper, you will
not be able to get the three guarantees.
-19-
Safety Battery overheating Battery management and cautions When the charge is completed, please unplug the charging line. To avoid re, do not charge at high temperatures(e.g. sweating rooms, bonre accessories, etc.). Charger attention Print head management and cautions There may be damage to the print head due to improper charging. We recommend not to use HPRT Poooli L1 in high humidity or dusty areas. Combustion hazard Print head overheating After printing, do not touch the print head directly to prevent burn. Charging port damage phenomenon Charging cautions Please gently insert or unplug the chargingline to prevent excessive damage to the charging port.
-20-
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operaon. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separaon between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modicaons to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condion without restricon. 1.1 96 400-806-9290 cn.hprt.com MADE IN CHINA Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd. Address: No.96, Rongyuan Road, Tong'an District, Xiamen, China E-mail: support@hprt.com Web: www.hprt.com