Mini Photo Printer
Paper Loading
How to Print
Precau�ons for Prin�ng
Power Bu�on
USB Interface
Packing List
USB Type-C Cable
Photo Paper (5pcs)
Quick Start Guide
Place your hands on both sides of the top cover,
push it towards the direc�on as shown on Figure 1.
Take out one packet of photo paper (including 5pcs or
10pcs of photo paper and 1pc of blue smart sheet), and
place them into the printer as shown on Figure 2. The
photo paper should be placed a�er the blue smart sheet
and its text side should face down.
Please note that never place more than 10pcs of photo
paper, and use the photo paper specially for the printer,
use other brands of that may affect the print quality.
Blue Smart Sheet
The text side of all the photo
paper should face down.
LED Indicator Status
Assemble the top cover.
Red LED Error Status
ON: Error (Paper jam/Out of paper
/Cover opened)
Slow Flash: Low power
Precau�ons for Photo Paper
The photo paper is easy to get damp, please use it as soon
as possible a�er opening.
Avoid excessive direct sunlight and over low temperature.
Avoid device damage caused by using non-special paper.
Do not fold or damage the paper.
LED Indicator
Paper Outlet
Slow Flash: Charging
Blue LED Basic Status
ON: Standby
OFF: Power off
Hold down the power bu�on for 3 seconds,
the printer will be turned on.
Turn on the Bluetooth on your mobile phone,
then select “MT53_XXXXXX” in the Bluetooth
list to connect.
Remark: “XXXXXX” indicates last six digits of
Bluetooth address.
Open the photo printer APP, choose “MT53”,
select the photos and enter the print preview.
Click the print icon that it will show the device list,
click the same model (“MT53_XXXXXX”) and confirm
prin�ng. Then the printer will conduct prin�ng.
Before pu�ng the photo paper into the printer, do not touch the prin�ng surface of the photo paper with
your hands to ensure that the prin�ng surface is free of dirt and dust par�cles, otherwise the prin�ng effect
will be affected.
It is not allowed to con�nuously print more than 10 sheets, or else the print head may accumulate dust, which
needs to be cleaned by the blue smart sheet again.
A�er prin�ng 3 sheets con�nuously, the printer may have overheat protec�on for the print head, and the
prin�ng will be suspended forcibly, which is a normal phenomenon. It can be printed again a�er cooling the
print head.
Ba�ery Charging
When the ba�ery power is low, the LED indicator will turn red and flash slowly. Please charge it by the supplied
USB cable in �me. If you con�nue prin�ng, it may power off automa�cally.
To charge, insert one end of the USB cable into the printer and the other end to the AC adapter or PC. When
connected, the LED indicator will turn blue and flash slowly to indicate charging.
It takes about 60 to 90 minutes for fully charge. A�er that, the blue LED indicator will be ligh�ng all the way.
Charge via PC
Charge via AC Adapter
1. When red LED stays on, you can check the detailed error condi�on on APP a�er connec�ng it to the printer.
2. When upda�ng the printer firmware, the blue LED will flash quickly.
The blue smart sheet is used for color correc�on and TPH cleaning. When prin�ng a�er loading 1 packet of paper
for the first �me, the blue smart sheet will be automa�cally out firstly, and then the photo will be printed out.
1. If Bluetooth has been unconnected for 5 seconds, the printer will enter sleeping mode,
press the power bu�on to awaken it.
2. In sleeping mode, if not awaken the printer within 5 minutes, it will be off automa�cally.
3. When using it for the second �me, just click the print icon that the printer will be connected
automa�cally and send data to print.
4. Do not touch the photo paper during prin�ng, or else it may appear stripes.
1. The printer can be charged via computer USB port or AC adapter. Please note that the AC adapter
is not supplied.
2. If charging via AC adapter, connect the USB cable to a power source of supplying DC 5V/2A.
Steps & NotesNote: The items in the package are actually based on the order.Steps & NotesFCC WARNING
This device complies with part 15 of the FCC Rules. Opera�on is subject
to the following two condi�ons: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired opera�on.
Any changes or modifica�ons not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protec�on against
harmful interference in a residen�al installa�on. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruc�ons, may cause
harmful interference to radio communica�ons.
However, there is no guarantee that interference will not occur in a
par�cular installa�on. If this equipment does cause harmful interference
to radio or television recep�on, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separa�on between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condi�on without restric�on.
APP Download
Scan the QR code to download APP.
Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech, Zone, Xiamen, China
E-mail: support@hprt.com
Web: www.hprt.com