all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Users Manual | Users Manual | 4.02 MiB | September 16 2022 | |||
1 2 |
|
Internal Photos | Internal Photos | 4.87 MiB | September 16 2022 | |||
1 2 |
|
External Photos | External Photos | 2.38 MiB | September 16 2022 | |||
1 2 |
|
Label and Location | ID Label/Location Info | 908.56 KiB | September 16 2022 | |||
1 2 |
|
Antenna Spec BT | Test Report | 1.48 MiB | September 16 2022 | |||
1 2 |
|
Antenna Spec WIFI | Test Report | 1.46 MiB | September 16 2022 | |||
1 2 | Block Diagram | Block Diagram | September 16 2022 | confidential | ||||
1 2 |
|
CONF Letter | Cover Letter(s) | 162.75 KiB | September 16 2022 | |||
1 2 | Operational Description | Operational Description | September 16 2022 | confidential | ||||
1 2 |
|
Power of Attorney Letter | Cover Letter(s) | 59.34 KiB | September 16 2022 | |||
1 2 |
|
RF Exposure Info | RF Exposure Info | 190.80 KiB | September 16 2022 | |||
1 2 |
|
SDoC Attestation Letter | Cover Letter(s) | 133.83 KiB | September 16 2022 | |||
1 2 | Schematics | Schematics | September 16 2022 | confidential | ||||
1 2 |
|
Test Report BT DTS | Test Report | 1.54 MiB | September 16 2022 | |||
1 2 |
|
Test Report WIFI DTS | Test Report | 2.08 MiB | September 16 2022 | |||
1 2 |
|
Test Setup Photos | Test Setup Photos | 2.07 MiB | September 16 2022 | |||
1 2 | Operation Description | Operational Description | September 16 2022 | confidential | ||||
1 2 |
|
Test Report BT DSS | Test Report | 2.37 MiB | September 16 2022 |
1 2 | Users Manual | Users Manual | 4.02 MiB | September 16 2022 |
Thermal Receipt Printer TP808 User Manual Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd. E-mail: support@hprt.com Web: www.hprt.com Content Statement............................................................................................................................................... 1 Important Safety Instructions.................................................................................................................2 1 OVERVIEW........................................................................................................................................... 4 1.1 Introductions............................................................................................................................ 4 1.2 The Main Features....................................................................................................................4 2 GETTING STARTED............................................................................................................................... 5 2.1 Packing List............................................................................................................................... 5 2.2 Appearance and Components..................................................................................................6 3 SPECIFICATION.....................................................................................................................................7 3.1 Printer Specification................................................................................................................. 7 3.2 Printing Media Specification.................................................................................................... 9 3.2.1 Continuous Thermal Paper Specification...................................................................... 9 3.2.2 Notices...........................................................................................................................9 3.3 Printing and Cutting Position..................................................................................................10 3.3.1 Printing position.......................................................................................................... 10 3.3.2 Cutting Position........................................................................................................... 10 4 INSTALLATION AND USAGE................................................................................................................11 4.1 Media Loading........................................................................................................................ 11 4.1.1 Paper Confirmation..................................................................................................... 11 4.1.2 Paper Installation (Forward Paper-out Direction)....................................................... 11 4.2 LED Indication and Beeper..................................................................................................... 12 4.3 Power Connection.................................................................................................................. 13 4.4 Interface Cable Connection.................................................................................................... 15 4.5 Cash Drawer Connection........................................................................................................ 15 4.6 Bluetooth/Wi-Fi Settings........................................................................................................ 15 4.6.1 Bluetooth Settings....................................................................................................... 15 4.6.2 Wi-Fi Settings...............................................................................................................16 4.7 Print Test.................................................................................................................................16 4.7.1 Print Self-Test...............................................................................................................16 4.7.2 Printing of Windows Driver Program.......................................................................... 16 5 INTERFACES........................................................................................................................................17 5.1 USB......................................................................................................................................... 17 5.2 Serial Interface........................................................................................................................18 5.3 Ethernet Interface.................................................................................................................. 19 5.4 Cash Drawer Interface............................................................................................................ 20 5.5 Power Supply Interface.......................................................................................................... 21 6 TROUBLESHOOTING.......................................................................................................................... 22 6.1 Printer Not Working............................................................................................................... 22 6.2 LED Indicator and Beeper.......................................................................................................22 6.3 Troubles Occur During Printing.............................................................................................. 22 6.4 Problems Emerge During the Paper Cutting.......................................................................... 23 6.5 Removing Jammed Paper.......................................................................................................23 7 PRINTER CLEANING AND MAINTENANCE......................................................................................... 24 7.1 Cleaning Head.........................................................................................................................24 7.2 Cleaning Sensors, Roller and/or Paper Path...........................................................................24 TP808 User Manual 8 DOWNLOAD SOFTWARES FROM HPRT WEBSITE.............................................................................. 25 9 UTILITY TOOL FOR POS INSTRUCTION................................................................................................26 9.1 Utility Tool Installation............................................................................................................26 9.2 Utility Tool Using.....................................................................................................................31 9.2.1 Add/Modify/Delete/Connection Printer.....................................................................31 9.2.2 Functions..................................................................................................................... 38 9.3 Firmware Update....................................................................................................................81 10 WINDOWS DRIVER...........................................................................................................................83 10.1 Information...........................................................................................................................83 10.2 Operating System (OS) Environment....................................................................................83 10.3 Windows Driver Preparation................................................................................................ 83 10.4 Windows Driver Installation................................................................................................. 84 10.5 Detailed Windows Driver Setting......................................................................................... 88 10.5.1. Printing Preferences................................................................................................. 88 10.5.2. Other Settings.........................................................................................................122 10.6 Uninstall Windows Driver...................................................................................................125 10.7 Specification....................................................................................................................... 127 APPENDIX........................................................................................................................................... 128 FCC-DECLARATION OF CONFORMITY......................................................................................... 128 EC DECLARATION OF CONFORMITY........................................................................................... 130 TP808 User Manual Statement This manual content may be altered without permission, and Xiamen Hanin Electronic Technology Co., Ltd. reserves the rights to make changes without notice in technology, spare parts, hardware and software of the products. If more information is needed about the products, please contact Xiamen Hanin Electronic Technology Co., Ltd. Without any written permission from the company, any section of this manual is prohibited to be copied or transferred in any form. Copyright This manual is printed in 2022, the copyright belongs to Xiamen Hanin Electronic Technology Co., Ltd. Printed in China Version 1.0 Warnings This must be complied with in order to avoid any damage to the human body and to the equipment. This is showing the important information and tips for the printer operating. Note:
Due to continuous update of product, please take in kind of real machine, such as accessories, programs etc. 1 TP808 User Manual Important Safety Instructions 1. Safety Warning Warnings: The print head will become very hot during printing; avoid contact with the print head after printing has finished. Warnings: Do not touch the printer head and connector in case static damage the printer head. 2. Instructions Carefully read the installation and operating instructions provided with the printer before starting up your printer. 1) Place the printer on a flat and stable surface. 2) Leave enough space around printer for operation and maintenance. 3) Do not place the printer on or near a heat source. 4) Do not use the printer near water. Never spill liquid into the printer. 5) Do not expose the printer to high temperatures, direct sunlight or dust. 6) Protect the printer from shock, impact and vibration. 7) Be certain the power source is within the voltage rating and frequency listed for the printer. 8) Switch off the printer power supply when wont use it for a long time. 9) Do not place the power cord where it can be stepped on. If the power cord becomes damaged or frayed, replace it immediately. 10) To ensure the print quality and reliability, you are suggested to use the recommended paper or the same quality paper. 11) Please switch off the power supply when connect/disconnect all the ports or it will cause damage to the printer control circuit. 12) Never carry out maintenance or repair work yourself. Always contact a qualified service technician. 13) Keep this User Manual in a place which is easily accessible at all times. 2 TP808 User Manual 3.Other Precautions The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Our company is not legally liable for any damages resulting from the use of the information in this manual. Our company and its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the operation and maintenance information and instructions provided by our company, as well as from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. We are not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not authentic or authorized products. 4.WEEE (Waste Electrical and Electric Equipment) This information only applies to customers in the European Union, according to Directive 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 04 July 2012 on waste electrical and legal systems, and to customers in countries in Europe, Middle East and Africa(EMEA) where they have implemented equivalent regulations. For other countries, please contact your local government to investigate the possibility of recycling your product. Note: The product needs to be reliably earthing after being powered on. FCC ID : 2AUTE-TP808P 3 TP808 User Manual 1 OVERVIEW 1.1 Introductions TP808 is a thermal receipt printer, featured by high print quality, high print speed, high stability, etc. It can be used in commercial POS system, food industry and occasions which need real-time field print receipts. TP808 can connect with other equipment through serial/USB/Ethernet/Wi-Fi/Bluetooth interfaces. And the printer drivers are available for the WINDOWS XP/WINDOWS 7/WINDOWS 8/WINDOWS 10/Linux operating system. 1.2 The Main Features 1) Low noise 2) High print speed 3) Easy paper loading 4) Support page mode printing 5) Compatible with various width paper 6) Cash drawer interface 7) Communication interfaces optional 4 TP808 User Manual 2 GETTING STARTED 2.1 Packing List After receiving your printer, please check for possible shipping damage:
1. Inspect the outside of both the box and the printer for possible damage. 2. Check whether you have received the following accessories together with the printer, if there are any items missing, please contact your local dealer. Notes:
1) The power adapter and power cord vary by country or region. 2) Items in the package are dependent on the actual order. 5 2.2 Appearance and Components Front TP808 User Manual Inside Rear Note: Wi-Fi and Bluetooth interfaces are embedded in the printer. 6 TP808 User Manual
(1/2) 3 SPECIFICATION 3.1 Printer Specification Table3-1 General Specification Item Parameter Printing Method Direct thermal line printing Resolution 203DPI, 8dots/mm Printing Printing Width 72mm Parameter Print Speed Max. 260mm/s Interface USB, Serial, Ethernet, Cash drawer, Wi-Fi, Bluetooth Print density Adjustable from level 1 to level 4 Page Mode Memory RAM Flash Support 4Mbyte 4Mbyte Chinese GBK 2424 Alphanumeric ASC917, 1224. User-defined Support Optional international character sets: PC437(std.Europe), Katakana, PC850(Multilingual), PC860(Portuguese), PC863(Canadian), PC865(Nordic), PC857(Turkish), PC737(Greek), ISO08859-7(Greek), WPC1252, PC866(Cyrillic #2), PC852(Latin 2), PC858(Euro), KU42(Thai), TIS11(Thai), TIS18(Thai), PC720(Arabic), WPC775(Baltic Rim), PC855(Cyrillic), PC862(Hebrew), PC864(Arabic), ISO8859-2(Latin2), ISO8859-15(Latin9), Fonts Code page WPC1250(Latin 2), WPC1251(Cyrillic), WPC1253(Greek), WPC1254(Turkish), WPC1255(Hebrew), WPC1256(Arabic), WPC1257(Baltic Rim), WPC1258(Vietnamese), MIK(Cyrillic), PC755(Latin 2), Iran, Iran II, Latvian, ISO-8859-1(WestEur), ISO-8859-3(Latin 3), ISO-8859-4(Baltic), ISO-8859-5(Cyrillic), ISO-8859-6(Arabic), ISO-8859-8(Hebrew), ISO-8859-9(Turkish), PC856, PC3848(ABICOMP), MONGOLIAN, VISCII 7 TP808 User Manual Table3-1 General Specification(Continued) Item 1D 2D Barcode Graphics Parameter
(2/2) UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODABAR, CODE128, CODE93 PDF417, QR code Support varied density bitmap and download bitmap printing Max size of each bitmap is 40K, the total size of bitmap is 256k. Detection Sensors Paper out detection, Cover open detection LED Indicator Power Supply Power LED Paper LED Error LED Input Output Blue Orange Red AC100V-240V DC24V, 2A Paper type Specified Thermal Paper Paper width 158 0 mm/
180 0 mm Paper thickness 0.0560.13mm Paper Roll paper diameter Paper load Paper cut Operating condition Physical Storage Spec. condition Max. OD 83mm Easy-loading structure of forward open cover or upward open cover Partial cut / full cut 050, 20%85%RH
-2070, 5%95%RH Dimensions 137.3(L)*132(W)*130.5(H)mm Command Software Weight Driver SDK 1.33kg ESC/POS Win7/Win8/Win10/Linux CUPS/OPOS/JavaPOS Android, iOS Agency Approvals FCC, CE 8 TP808 User Manual 3.2 Printing Media Specification 3.2.1 Continuous Thermal Paper Specification Paper Type
: Specified Thermal Paper Paper Width
158 0 mm/
180 0 mm Paper Outer Diameter : Max. 83 mm Paper Thickness
: 0.056 0.13m Paper Type Manufacturer FD210,PD150R,PD160R OJI Paper CO.,LTD. 3.2.2 Notices Notes:
1) Please use the recommended thermal paper or same quality paper, otherwise it will influence the printing quality and decrease the thermal printer head life;
2) Dont stick the paper on the roll paper mandril;
3) If the thermal paper is polluted by chemical or oil, the thermal paper heat sensibility decreases, which will influence the printing quality;
4) Dont use finger nail or hard articles to touch the surface of thermal paper, otherwise it will cause color fading;
5) When the environment temperature is higher than 70C, the thermal paper color will fade, so pay attention to the influence of temperature, humidity and sunlight. 9 TP808 User Manual 3.3 Printing and Cutting Position 3.3.1 Printing position 0 1 -80 mm Print Paper 0 1 -58 mm Print Paper 3.3.2 Cutting Position Type TP808 Paper Cutting Position(L1) 11.6mm 10 TP808 User Manual 4 INSTALLATION AND USAGE 4.1 Media Loading 4.1.1 Paper Confirmation 1) When using 80mm(width) roll paper, take down the paper guide of both sides. 2) When using 58mm(width) roll paper, insert the paper guide to each side. Note: Roll paper should be placed in the middle. 4.1.2 Paper Installation (Forward Paper-out Direction) 1) Pull the cover opening lever to open the printer cover. 2) Load the roll paper in the correct direction as shown below. 3) Pull out some roll paper, and close the printer cover. 11 4) Tear the extra paper in the direction of printer. TP808 User Manual Notes:
1) According to the paper size to adjust the paper guide;
2) Make sure the paper inside is at tight status, or it will cause paper jam or other trouble. 4.2 LED Indication and Beeper Function specification of indicated light and beeper. Name POWER LED
(Blue) ERROR LED
(Red) PAPER LED
(Orange) Status ON OFF Flashing OFF ON OFF Specification The printer works well The printer does not work The printer is in an error state The printer is in an normal state The printer is in paper end state The printer is in an normal state Description Open the cover of printer Full of paper No paper Cutter jam POWER LED ERROR LED PAPER LED Beeper ON ON ON ON ON OFF ON Flash ON OFF ON OFF Beep, Beep, Beep Silent Beep Beep Beep. BeepBeep Notes:
The printer uses a thermistor to detect the temperature of the print head. If the temperature of print head is more than 65C, printer will send a warning. If the temperature of print head is more than 80C, printer will stop working until the temperature is less than 60C. 12 TP808 User Manual 4.3 Power Connection 1) Connect power adapter to printer;
2) Connect power adapter to power cord;
3) Plug the other side of power cord into the socket outlet. Pay attention about disconnecting or connecting the power adapter at right method, or its easy to cause damage. When pull out the adapter, please pinch the shell of power adapter and pull the switch up, when the switch is fully open, pull out the power adapter. Dont pull the plug hard by squeezing at any other place of power adapter. Because it is difficult to pull it out and easy to damage the cable. 13 TP808 User Manual Notes:
1) Please only use the power adapter recommended by supplier or equivalent products;
2) When disconnecting the power adapter plug, hold plug connector housing, and avoid pulling the cable directly;
3) Avoid dragging the power adapter cable, otherwise it will damage the cables, causing fire and shock;
4) Avoid putting power adapter around a heating device, otherwise the cable may melt, causing fire and shock;
5) If you do not use the printer in a long time, disconnect the power supply of printer power adapter. 14 TP808 User Manual 4.4 Interface Cable Connection 1) Make sure the printer's power switch is turned off;
2) Put the interface cable into the matched interface and fixed with screws (or spring) on the plug;
3) Connect the other end of the interface cable to the host. 4.5 Cash Drawer Connection 1) Make sure the printer's power switch is turned off;
2) Connect the cash drawer cable into the cash drawer interface on the rear side of the printer. Warning:
Cash drawer interface can only be connected to a voltage of 24V cash drawer device (cant connect to the phone line, etc.) 4.6 Bluetooth/Wi-Fi Settings 4.6.1 Bluetooth Settings Default name: BT Printer Default password: 0000 or 1234 Please refer to the Bluetooth Connection Manual for details QR code for Bluetooth Connection Manual 15 TP808 User Manual 4.6.2 Wi-Fi Settings Printer factory default Wi-Fi mode is AP mode with IP address 192.168.1.1 and SSID POS_WIFI. After the PC or mobile phone is connected with printer successfully, users can set the parameters through utility tool. Please refer to the Wi-Fi Operation Manual for details QR code for Wi-Fi Operation Manual 4.7 Print Test 4.7.1 Print Self-Test The self-test checks the printers current settings, status and whether the printer has any problem. 1Make sure the power is connected and paper is loaded properly. 2Make sure the printer is off and top cover is closed properly. 3Press the paper feed button and power button simultaneously to turn the printer on. The printer is ready to receive data as soon as it completes the self-test. 4.7.2 Printing of Windows Driver Program 1Install the Windows Driver program. (Please refer to the Windows Driver Manual) 2Please set the Interface as the type you use. 3Use the Windows Driver Program to print out the Print Test Page. 16 TP808 User Manual 5 INTERFACES TP808 supports cash drawer interface and many other various communicate interfaces, such as Serial interface, USB interface, Ethernet interface, Wi-Fi and Bluetooth interfaces. 5.1 USB Figure 5-1 PIN SIGNAL NAME 1 2 3 4 VBUS D-
D+
GND 17 5.2 Serial Interface TP808 User Manual Figure 5-2 PIN SIGNAL NAME 1 2 3 4 5 6 7 8 9
TXD RXD
GND RTS CTS RTS
18 5.3 Ethernet Interface TP808 User Manual PIN NO. Signal Name 1 2 3 4 5 6 7 8 TX+
TX-
RX+
RX-
Note: The printer is equipped with an Ethernet interface, and use the network connection router, switch and other network communication equipment which meet RJ45 interface standard. When connecting directly with PC, it is suggested that the cross network line in accordance with RJ45 interface standard should be adopted. 19 5.4 Cash Drawer Interface TP808 User Manual Figure 5-4 PIN NO. Signal Name 1 2 3 4 5 6 FG Drawer 1 DRSW VDR Drawer 2 GND Electrical characteristics Driving voltageDC 24 V Driving currentMaximum 0.8 A ( In 510 ms) Drawer check signalL = 00.5 V H = 35 V 20 5.5 Power Supply Interface TP808 User Manual Figure 5-5 PIN No. Signal Name 1 2 3 SHELL
+24V GND N.C F.G Printer end: Unetop DC-002 or other products of the same type. User end: Unetop DP-002 or other products of the same type. 21 TP808 User Manual 6 TROUBLESHOOTING Your printer is very reliable, but occasionally problems may occur. This chapter provides information on some common problems you may encounter and how to solve them. If you encounter problems that you can not resolve, contact your dealer for assistance. 6.1 Printer Not Working Problem Description Probable Reason Solution LED does not light, printer is not working Printer has no power Printer is not on Connect printer to the power supply Turn on the printer Circuit board is broken Contact with the dealer 6.2 LED Indicator and Beeper Problem Description Probable Reason Solution Paper LED is always on Paper near end The roll paper is near end, the printer can work normally Error LED is always on and beeper alarms Printer cover is open Close the printer cover Paper LED and Error LED are always on and beeper alarms Paper end Reload the roll paper Error LED blinks and beeper alarms Thermal print head is overheated Over-voltage Low-voltage Turn the printer off and resume when it cools Print with specified voltage Print with specified voltage 6.3 Troubles Occur During Printing Problem Description Probable Reason Solution Coloured stripe in the paper Paper near end Reload the roll paper Incorrect roll paper loading Check if the roll paper is installed Blurred printing or spot Unqualified roll paper Dirty thermal head or print roller Low print density Paper is not feeding normally Paper jam Vertical print words are missing Dirty thermal head or print roller Use recommended thermal roll paper Clean the thermal head or print roller Increase the print density level Open the printer cover, check the paper path and remove jammed paper Clean the thermal head or print roller Thermal head is damaged Contact with your dealer for assistance Note: Regarding the density of setting, please refer to "Utility Tool Manual". 22 TP808 User Manual 6.4 Problems Emerge During the Paper Cutting Problem Description Probable Reason Resolution Cutter jam, the movable cutter cannot go back Insufficient cutting Paper jam Cutter abrasion, insufficient cutting Worn gear and worn wheel abrasion Replace the cutter Replace the worn gear and worn wheel Motor is burnt Replace the motor Paper scraps Clean the paper scraps on the transmission system Cutter edge abrasion, paper is too thick Thermal printer head is over-heated Driving too fast Wrong paper feeding position Replace the cutter Reduce the density of printing Reduce the printer speed to the limit of thermal printer head Put the paper parallel with the paper mount and insert into the space between platen roller and the thermal printer head. Note: The density of setting, please refer to "Utility Tool Manual"
6.5 Removing Jammed Paper Warning:Do not touch the thermal print head because it becomes very hot after printing. If the printer cover can be opened, operate it according to the next steps. 1) Turn off the printer and pull the deflector rod to open the print cover. 2) Remove jammed paper, reload the paper roll, and close the printer cover. 23 TP808 User Manual 7 PRINTER CLEANING AND MAINTENANCE Print quality might be degraded by dust, foreign substance, adhesive substance, or other polluted materials stuck on the printer head or inside the printer. When printer is dirty, clean the print head as follows:
CAUTION Make sure to turn off the printer before cleaning. As the print head gets hot during printing, turn the printer off and wait approximately 2~3 minutes before starting cleaning. When cleaning the print head, take care not to touch the heated portion of the print head. Print head may be damaged by static electricity, etc. Avoid the print head being scratched and/or damaged in any way. 7.1 Cleaning Head 1) Open the Printer Cover and use the cleaning pen to clean the head in the direction from the center of the head to the edges. 2) After cleaning the head, do not use the printer until the alcohol used for cleaning evaporates completely (1~2 min) and the printer is absolutely dry. 7.2 Cleaning Sensors, Roller and/or Paper Path 1) Open the printer cover and then remove the paper. 2) Use dry cloth or cotton swab to remove any dust or foreign substance . 3) Soak the cloth or cotton swab in medical-use alcohol and use it to remove adhesive foreign substances or other polluted materials. 4) After cleaning the parts, do not use the printer until the alcohol evaporates completely (1~2 min) and the printer is completely dry. Clean the parts whenever print quality or paper detection degraded. 24 TP808 User Manual 8 DOWNLOAD SOFTWARES FROM HPRT WEBSITE Under URL http://www.hprt.com/Downloads.html, take the following steps to download software from HPRT website:
1) Choose model name of product -> Choose type -> Choose system 2) Click download 25 TP808 User Manual 9 UTILITY TOOL FOR POS INSTRUCTION Utility Tool is applicable to the following operating system:
Microsoft Windows 10 (32 bit/64 bit) Microsoft Windows 8 (32 bit/64 bit) Microsoft Windows 7 SP1 (32 bit/64 bit) Microsoft Windows Vista SP2 (32 bit/64 bit) Microsoft Windows XP Professional SP3 (32 bit) Microsoft Windows Server 2012 (64 bit) Microsoft Windows Server 2008 R2 9.1 Utility Tool Installation 1) Open the installation package. 2) Choose English and click OK. 26 3) Select destination location to install the HPRT Utility Tool. Click Next. TP808 User Manual 27 4) Select start menu folder. Click Next. TP808 User Manual 28 5)Click Install. TP808 User Manual 29 6) Click Finish. HPRT Utility Tool is installed successfully. TP808 User Manual 30 TP808 User Manual 9.2 Utility Tool Using 9.2.1 Add/Modify/Delete/Connection Printer Warning: In different operating system, screen has a little difference. Please operate it according to the tips. Take TP808 (Windows 7) for example. Add printer 1) Click Add Printer. 31 2) Choose the appropriate printer type and port. Then click OK. (Take TP808 for example) TP808 User Manual 32 Modify printer 1) Choose the printer you want to modify in the list. Click Modify Printer. TP808 User Manual 33 2) Choose the new printer and new port. Then click OK. TP808 User Manual 3) The new printer is added successfully. 34 Delete printer 1) Choose the printer you want to delete in the list and click Delete Printer. TP808 User Manual 2) Click Yes, then the printer is deleted. 35 TP808 User Manual Connection Test Make sure printer is connected to computer and it is power on. 1 Choose the printer. Click Connection Test. 36 2) If the connection is successful, it will appear the following window. If the connection is unsuccessful, please connect the printer with computer. TP808 User Manual Note:
Make sure printer is connected to computer and power on. Make sure printer is loaded with paper. Before using the following function, carry out the Connection Test first. 37 TP808 User Manual 9.2.2 Functions Printer Test contains the following items:
Printer Test Common Test Manage Images Download Image in Compatible Mode Code Page Setting Download Fonts Parameter Setting Advanced Settings 9.2.2.1 Printer Test 1) Self Test Click Self Test to see if the printer will print properly. 38 TP808 User Manual 2) Full Cut Test Click the Full Cut Test and the paper will be cut automatically. Cutting method is full-cutting. The paper would be falling down from the paper outlet after cutting. 3) Partial Cut Test Click the cutter test and the paper will be cut automatically. Cutting method is partial cut (Partial cut:
Not all cut off, leave a connection point between the two sheets of paper). As shown in the figure:
4) Print Text Test Click "Print Text Test", input the text you want to print. When you click "Print", the printer starts printing text content. Such as: Print Text Test. 39 Note: The language option in the lower right corner is checked according to the input text. (For example: The input is Simplified Chinese, the language is checked for Simplified Chinese, the printer prints the input text according to the setting options, and if you check other languages, TP808 User Manual the printer does not print the text) 5) 2D Code Click the QRCode mode. Model: 1~2 Module size: 1~16 The larger the module value, the larger the printed QR code is, and the smaller the opposite. Error correction level: 7%~30%
The higher the error correction level, the more intensive the module graphics. 40 Click the PDF417 mode. TP808 User Manual Columns: 0~30 Rows: 0~90 Width of the module: 2~6 The larger the module value, the wider the width of the printed PDF417 barcode, and the smaller the opposite. Row height: 2~8 The larger the module value, the longer the printed PDF417 barcode, and the smaller the opposite. Error connection level 41 TP808 User Manual 9.2.2.2 Command test In the command test, you can send command to the printer. Input text or hexadecimal data. Select a file or enter a command in the input box. 1Therere two ways to load files. You can choose the way you want. 42 2Click Send by Text, input text content. TP808 User Manual 43 TP808 User Manual Sending Recycle:
When the interval is set to 3000ms (you can set the interval as needed), then click Send, the printer starts to recycle printing. Click Stop to stop the recycle printing. 44 2 Click Send by Hex, input the content. (Convert text to HEX or send ESC command) TP808 User Manual 45 TP808 User Manual 9.2.2.3 Manage Images 46 TP808 User Manual Download image Click "Download" to add the image, if you want to print the picture, set the print location before clicking "Download mode of G" to print the picture. (It is recommended to use a picture in BMP format) Select the print location, center, left, and right. (Such as, left print). 47 TP808 User Manual Note: Total memory for bitmap is 256K. 48 Delete Image Note: each time click "Download mode of G", an image list number will be generated. TP808 User Manual Click the image list, select "Delete selected image" will delete the image, click "Delete all Images", without clicking the list option to delete all the images in the list. 49 TP808 User Manual 9.2.2.4 Code Page Setting Select the code page from the list and click Set. Note: This code page is only valid in multiple languages. 50 TP808 User Manual 9.2.2.5 Download Fonts to Printer Select the font from the existing file and click "Download". Note: After downloading the font successfully, you need to restart the printer to take effect. 51 TP808 User Manual 9.2.2.6 Parameter Setting You can set Arabic Character Transform, Language Mode, Signal light flashing time and UTF-8 input mode. 52 TP808 User Manual 9.2.2.7 Advanced Setting The advanced settings contain the following items. 53 Function Setting TP808 User Manual 54 TP808 User Manual AD Settings:
1 Detect Paper AD Value: click Read and you can see the default value is 1614 and cannot be input. 2 Set AD threshold value: You can input the value, and the ideal value is the AD value plus 300, thats 1914, and the default value is 2100. Long Beeping After cutting:
Disable: there is no sound after cutting Use printer buzzer (The beeping time, times and interval time can be set for what you want, such as 1 milliseconds, 2 milliseconds or 3 milliseconds, etc.):
The following setting is set as an example:
When cutting one piece of paper each time, the printer will emit the Beep for one time, and the beeping time is two milliseconds and beeping interval is three milliseconds. Note: 100ms=0.1s, 1s=1000ms Buzzer Volume:
The Very Low is the minimum sound, and the Loud the maximum sound. You can select a volume level and click "Setting" to print (Default: "Standard" level). 55 Reduction Print Setting Select the item and click "Settings". TP808 User Manual Choose the item and click Setting. 1 Reduction Of Excessive Top Margin:
When the printer is in the "off" state, the blank part at the top of the printed paper is larger than the blank part at the top of the paper printed in the "on" state. 2 Reduction Of Excessive Bottom Margin:
When the printer is in the "off" state, the blank part of the bottom of the printed paper is larger than the blank part of the bottom of the paper printed in the "on" state. 3 Reduction Vertical Spacing: 25%~75%
The bigger the reduction vertical spacing, the narrower the interval between two lines of characters. 4 Reduction Line Feeds: 25%~75%
The higher the reduction line feeds, the narrower the interval between two lines of characters. 5 Reduction Height of Barcode: 25%~75%
The bigger the reduction height of barcode, the smaller the height of the barcode. 56 TP808 User Manual DIP Setting Click "Read" to get the printer parameters, click "Write" to send the modified parameters to the printer. 57 After the serial port parameter is set, click "Set". TP808 User Manual Note: When DIP setting is set in soft, the DIP switch in the bottom of printer is disable. After setting the DIP successfully, you need to restart the printer before using it. 58 TP808 User Manual Printer hardware setting 1Print Density: Light, Medium, Standard, Dark (default "standard" level) The print density value varies according to the paper material and it can be adjusted to suit your needs. 2DIP Mode: 180/203DPI (default "203 DPI") The printer supports both of these resolutions. 3Language Mode:
Chinese, Japanese, Korean mode (default) Multi-language mode COM Setting 1 Baud Rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200 2 Data Length: 7bits, 8bits 3 Parity Check: No, EVEN, ODD 4ADDC: DTR/DSR, XON/XOFF Note: The value of the serial port parameter can be obtained according to the value of the Self-test page information:
E.g: Self-test pageSerial 115200, None, 8, 1, DTR/DSR Baud Rate: 115200 Parity Check: None Data Length: 8bits Stop Bits: 1 ADDC: DTR/DSR Note: When the DIP setting is set in memory switch mode, the DIP switch at the bottom of the printer need to be disabled. 59 Modify the COM setting TP808 User Manual 1 After setting the parameters as required, click "Write" and restart the printer. 2 After restarting the printer, open the main menu screen of the tool and click "Modify Printer". 3Select the port category "COM" and set the baud rate to the value "57600" as shown above, and parity "None". This port allows you to print after setup is complete. Note: When the DIP setting is set in memory switch mode, the DIP switch at the bottom of the printer need to be disabled. 60 TP808 User Manual Paper Width Setting 1) 58mm360dot 2) 58mm384dot 3) 58mm416dot 4) 80mm512dot 5) 80mm576dot Note: Select the paper width above according to the paper print width. 61 TP808 User Manual Ethernet Setting Note: This setting is only available for models with Ethernet functionality. This mode is divided into Auto Assignment IP and Static IP Mode, select one of the modes to connect as needed. Note: IP addresses can be obtained from the Self-test page. 62 TP808 User Manual Static IP Mode 1) Change the printer IP address so that the printer IP address (such as: 192.168.0.33) is the same segment as the host IP address (such as: 10.0.21.89). Here is the illustration:
Figure Printer IP Address 63 TP808 User Manual 2Set the same network segment. Figure Host IP Address Figure Printer IP Address 64 TP808 User Manual Auto Assignment IP This mode automatically assigns the IP address to the printer. When the settings are complete, click "Write", then restart the printer. 65 USB Port Setting TP808 User Manual Click "Virtual serial port" setting and restart the printer. 66 TP808 User Manual Check the Virtual Serial Port 1 Right-click the computer and select Manage. 2 Click "Device Manager" to view the virtual port. (such as: COM7) 67 3) Return to the printer utility and click "Modify Printer". TP808 User Manual 68 4Change the port to "COM7". TP808 User Manual 69 TP808 User Manual Black Mark Setting When using black mark paper, the black mark can be set, and the printer will automatically locate the black mark position. 1Print start position (>=-14mm)
>=14mm: the start position of printing is at least 14mm from the bottom edge of the black mark paper. 2Cutter start position (>=-25mm)
>=-25mm: the position of cutter is at least 25mm from the bottom edge of the black mark paper. 70 TP808 User Manual Bluetooth Setting Note: This setting is only available for models with Bluetooth functionality. In the below window, type in the new Bluetooth name and password, then click Set and restart the printer to take it into effect. Note: when Simple Pairing is ticked, the password is not needed for Bluetooth connection. When Simple Pairing is not ticked, the password is needed for Bluetooth connection. Length of Print Click Length of Print to obtain the length of the paper that the printer has printed. 71 Wi-Fi Firmware Update 1) Click WiFi Firmware Update. TP808 User Manual 2) Click ... to choose file and click Update. 72 Cut Pper Config TP808 User Manual 1Cut paper after the cover is closed: the printer automatically cuts the paper after closing the cover. 2Do not cut paper after the cover is closed: the printer does not automatically cut the paper after closing the cover. 3Cut paper when power on: the printer automatically cut paper after the printer is power on. 4Do not cut when power on: the printer does not automatically cut paper after the printer is power on. 73 TP808 User Manual Wi-Fi Setting Note: This setting is only available for models with Wi-Fi functionality. The method to switch between Ethernet and Wi-Fi modes: In the power-on state, press and hold the paper feed button and the power button at the same time until the printer restarts. Then the printer will print out Ethernet or Wi-Fi information. Note: Simultaneous use of Ethernet and Wi-Fi is not supported. The following steps take TP808 (under WINDOWS 10) for example, and the setting is only available for those models with Wi-Fi function. 74 1. Click Read to obtain the current status of printer. TP808 User Manual 1. Wi-Fi Module supports AP mode and STA mode, and default as AP mode. Under AP mode, printer will be used as a wireless network access point, computer or other mobile devices can connect to this Wi-Fi. Module Version Current Module Version WiFi Mode Supports AP mode and STA mode, and default as AP mode SSID Modifiable, default as POS_WIFI IP Address Modifiable, default as 192.168.1.1 If its necessary to modify SSID and IP address, click Set after modifying, then restart the printer. 75 TP808 User Manual 76 TP808 User Manual When using the STA mode, take the printer as a terminal. The PC or mobile devices and printer need to be on the same LAN. Choose STA under Wi-Fi mode, the interface is shifted to the following screenshot:
POS_WIFI 77 TP808 User Manual Click Scan, choose a connectable hot spot from SSID options. type in the password of Wi-Fi that you want to connect to. Click Set. After it is set successfully, the printer would restart automatically. SSID DHCP IP Address Default gateway Subnet mask The SSID name that is chosen after scanning hot spot Enable/Disable dynamic allocation of IP When DHCP is at Enable status, automatically, no need to do the setting;
When DHCP is at Disable status, IP address must be set to the same LAN with the Wi-Fi that you connect to IP address will be allocated When DHCP is at Enable status, default gateway will be allocated automatically, no need to do the setting;
When DHCP is at Disable status, default gateway can be input When DHCP is at Enable status, subnet mask will be allocated automatically, no need to do the setting;
When DHCP is at Disable status, subnet mask can be input 78 TP808 User Manual After the printer is restarted, short press the power button 3 times, so that the current Wi-Fi parameter information can be printed. After completing the setting, connect the computer to the Wi-Fi that the printer connects to, click Modify Printer, choose TCP/IP, and set the IP address the same as the printers IP address, then click OK. (Following Screenshot takes TP808 as an example) TP808 I TP808 I TP808 Click Connection Test to check if the setting is successful. 79 TP808 User Manual Notes: When the printer is failed to connect with its master devices, please check if the settings are correct, and please check if the master devices and the printer are on the same network segment. When parameter setting error occurs, which leads to the failed connection, please reset the Wi-Fi parameter by the following way 1) or 2):
1) For TP808 (with built-in Wi-Fi module), shortly press the power button five times, so that the Wi-Fi parameter would be reset. The printer would restart automatically, so the reset is taken into effect. 2) For other models of POS printers (with external Wi-Fi module), shortly press the Function/Reset Button (at the interface board) for five times, and the Wi-Fi parameter would be reset. The printer would restart automatically, so the reset is taken into effect. 80 9.3 Firmware Update 1Click FW Update. TP808 User Manual 81 2When the device appears "Printer", select the Dfu file. TP808 User Manual 3Click Update. 4Update success. 5Restart the printer. 82 TP808 User Manual 10 WINDOWS DRIVER 10.1 Information This Windows Driver Installation Manual provides information on installation, detailed specifications, and usage of the printers Windows Driver according to PC operating system (OS). We maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. As follows, product specifications and/or user manual content may be changed without prior notice. 10.2 Operating System (OS) Environment The following operating systems are supported for usage. Microsoft Windows 10 (32 bit/64 bit) Microsoft Windows 8 (32 bit/64 bit) Microsoft Windows 7 SP1 (32 bit/64 bit) Microsoft Windows Vista SP2 (32 bit/64 bit) Microsoft Windows XP Professional SP3 (32 bit) Microsoft Windows Server 2012 (64 bit) Microsoft Windows Server 2008 R2 10.3 Windows Driver Preparation The Windows Driver is included in the enclosed CD. If the order doesnt include the CD, please follow the link http://www.hprt.com/Downloads.html and find the product name you want (for example TP808), then you can download Windows Driver and other items. The Windows Driver installation file name is HPRT_POS_Printer_Driver-v-X.X.X.X.exe X.X.X.X indicates the version number, which is updated from time to time. Eg. : HPRT_POS_Printer_Driver_v2.7.3.0.exe 83 TP808 User Manual 10.4 Windows Driver Installation Warning:
Under different operating system, the screen has slight difference. Please operate it according to the tips. Take TP808 (Windows 7) as example.
(1) Double click Windows Driver.
(2) Choose I accept the agreement and click
(3) Next. 84
(4) Click Next TP808 User Manual 85
(5) Choose the matched type and port (USBxxx is for USB port, COMx is for serial port, LPTx is for parallel port). Choose the type and port of driver, such as COM1 as port. Click Next. TP808 User Manual NOTE: If printer is already connected with computer by USB port, it only needs to click Install, then it will be installed automatically. Otherwise, proceed to the next step. 86
(6) Click Finish. POS printer driver is installed successfully. TP808 User Manual
(7) After installation, the icon will be found in Start Devices and Printers. NOTE: If you already installed the driver (No matter what kind of port), when you connect the printer with computer, it will create a USB port automatically. 87 TP808 User Manual 10.5 Detailed Windows Driver Setting 10.5.1. Printing Preferences 1. Click StartDevices and Printers. Right click TP808 and choose Printing preferences. 88 2. According to the different needs, choose Paper\Offset\Rotate\Effect\Copies in Page. TP808 User Manual 1 Paper 2 Offset 89 Click Manager, add or delete paper. TP808 User Manual Click Advanced to set Save Paper, Cut Paper, Feed Paper, Cash Drawer, Custom Command, Logo, Buzzer, Code Page. 1) Save Paper 90 2) Cut Paper TP808 User Manual Cut Distance: 0/5/10/15/20mm (End Document) 91 3Feed Paper TP808 User Manual Feed Mode: Feed Automatically/Cut Automatically/Cut Automatically Per Page/None Feed Distance: 0/5/10/15/20mm (End Document) 92 4) Cash Drawer TP808 User Manual 93 5) Logo TP808 User Manual Note: This setting need to be set in utility, here are the steps:
1) Open the utility and click "Manage Images". 94 2Click Download. TP808 User Manual 3Click "Add" to add a logo. (BMP format is recommended) 95 TP808 User Manual 4Select the print location, and then click "Download mode of G". (Such as: left print) 5Return to image list to view the image number. Note: each time click "Download mode of G", an image list number will be generated. 96 6) Select Printer properties in Devices and Printers, then click Preference. TP808 User Manual 97 7Click the Advanced, then click Logo. TP808 User Manual 98 8Set the printing time to print and click "OK". (Such as: Start Document) TP808 User Manual 9Return to the logo setting in driver, also select "Print left". 10Set the key Code according to the image number. (Such as: 0 0) 99 11) Then click OK. TP808 User Manual 100 12Click Print Test Page to view the printing effect. TP808 User Manual 101 6) Buzzer TP808 User Manual Buzzer times: 0/1/2/3/4/5 Buzzer Duration: 0.0/0.5/1/1.5/2/2.5/3.0 Sec Buzzer Interval: 0.0/0.5/1/1.5/2/2.5/3.0 Sec Note: this setting must be operated in Utility. 102 TP808 User Manual 7) Code Page 8) Error Reprint 103 3. Click Watermark. Set watermark to print (BMP format is recommended) and click OK to save it. TP808 User Manual 104 4. Click Halftone to set the halftone. TP808 User Manual 105 TP808 User Manual 106 TP808 User Manual 5. Set up the Barcode Assuming the font type of the main document is Italics, 123456to the barcode printing, the steps are as follows:
Sets the data "123456" font type to a different font from the main document. Such as: Arial. if you want to convert the data 107 Open the Preference. If the document is open, you can set it in the document: file-print-preferences. TP808 User Manual 108 1Add Barcode firstly. TP808 User Manual 109 2Set the Font Name and the Barcode Option. TP808 User Manual 110 3) Click the Printer Setting. Choose the Display Language for Properties TP808 User Manual 111 TP808 User Manual Turn on the Font Substitution, select the system text need to be replaced (for example, Arial), and then select the font you want to replace (for example, 01) and click Settings, and the replacement font will display "01". the steps are as follows:
112 TP808 User Manual 113 TP808 User Manual 114 TP808 User Manual 115 If you do not have a barcode set, the action is as follows:
1 Suppose you change the size of the data "123456", for example:
TP808 User Manual 2 Set the Printing preferences. 116 3Click the Printer Setting. Choose the Display Language for Properties. TP808 User Manual 4Turn on the Font Substitution. 117 5Select the System Font, for example: Arial. TP808 User Manual 118 6Select the font to that you went to replace. TP808 User Manual 119 7Click Setting. TP808 User Manual 120 TP808 User Manual 121 10.5.2. Other Settings 1. Click StartDevices and Printers. Right click TP808 and choose Printer properties. TP808 User Manual 2. Choose General, click on Print Test Page, then it will print the current settings. 122 3. Setting the Ports TP808 User Manual 123 4. Click Advanced to set the printing time. TP808 User Manual 124 TP808 User Manual 10.6 Uninstall Windows Driver 1) Double click Windows Driver. 2) Choose Uninstall printer driver, then click Next 125 3) Choose TP808, then click Next TP808 User Manual 126 TP808 User Manual 10.7 Specification Resolution:
TP808: 203203dpi Paper Size:
70*297mm 72*420mm 72*3276mm 127 APPENDIX TP808 User Manual FCC-DECLARATION OF CONFORMITY Product HPRT TP808 We declare that the product conforms to the following specification:
FCC Part 15, Subpart B Class B digital device. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference;
This device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that any changes or modification not expressly approved in this manual could void the users authority to operate the equipment. To ensure compliance, this printer must be used with shielded communication cables. Use only power supplies listed in this manual and /or recommended and approved in this manual. 128 TP808 User Manual FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 129 TP808 User Manual EC DECLARATION OF CONFORMITY Manufacturer certifies that the following designated product HPRT TP808 Type of product Direct Thermal Line Printing It is in conformity with the standards Test standard information Under the Council Directive: (LVD) Directive 2014/35/EU relating to electrical equipment designed for use within Low Voltage Directive. EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013 Under the Council Directive: (EMC) Directive 2014/30/EU relating to Electro Magnetic Compatibility. EN 55032: 2015 EN 55024: 2010 EN 61000-3-2: 2014 EN 61000-3-3: 2013 We declare herewith that as a result of the manner in which the device designated Below was designed, the type of construction and the devices which, as a result have been brought on to the general market comply with the relevant fundamental regulations of the EC Rules for Safety. And we declare herewith the below mentioned model is conformity with Directive 2014/30/EU and 2014/35/EU. In the event of any alteration which has not been approved by us being made to any device as designated below, this statement shall thereby be made invalid. The declaration is sole responsibility of the manufacturer HPRT Name of manufacturer 130
1 2 | Label and Location | ID Label/Location Info | 908.56 KiB | September 16 2022 |
Reference No.: WTX22X08157446W001/002/003 Page 1 of 14 ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the devices expected lifetime. Proposed Label Location on EUT FCC ID Label Location Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn
1 2 | CONF Letter | Cover Letter(s) | 162.75 KiB | September 16 2022 |
Xiamen Hanin Electronic Technology Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Date: 2022-09-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:2AUTE-TP808P Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Block Diagram Operational Description Schematics Parts List Tune-Up Information Security Information Software Defined Radio (SDR) Information The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
External Photos Internal Photos Test Setup Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. or For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Xiamen Hanin Electronic Technology Co.,Ltd.
Jeff Wang/Certified Engineer
1 2 | Power of Attorney Letter | Cover Letter(s) | 59.34 KiB | September 16 2022 |
Xiamen Hanin Electronic Technology Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China
(FCC ID 2AUTE-TP808P
) POWER OF ATTORNEY DATE: 2022-09-13 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:
We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, Xiamen Hanin Electronic Technology Co.,Ltd. federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. are not subject to a denial of Sincerely, Xiamen Hanin Electronic Technology Co.,Ltd.
(Jeff Wang)
(Certified Engineer)
1 2 | SDoC Attestation Letter | Cover Letter(s) | 133.83 KiB | September 16 2022 |
Xiamen Hanin Electronic Technology Co.,Ltd. Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022-09-13 SUBJECT: FCC Application for FCC ID: 2AUTE-TP808P To Whom It May Concern:
I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B device. I understand the following FCC requirements:
1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the
"accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the Users Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, Xiamen Hanin Electronic Technology Co.,Ltd.
(Jeff Wang)
(Certified Engineer)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-09-16 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-09-16
|
||||
1 2 | Applicant's complete, legal business name |
Xiamen Hanin Electronic Technology Co.,Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0028895233
|
||||
1 2 | Physical Address |
Room 305A, Angye Building, Pioneering Park Torch High-tech,Zone
|
||||
1 2 |
Room 305A, Angye Building, Pioneering Park
|
|||||
1 2 |
Xiamen, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@timcoengr.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AUTE
|
||||
1 2 | Equipment Product Code |
TP808P
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** W********
|
||||
1 2 | Title |
Certified Engineer
|
||||
1 2 | Telephone Number |
13799********
|
||||
1 2 | Fax Number |
+86-(********
|
||||
1 2 |
J******@prttech.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Thermal Receipt Printer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as per FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz bandwidth mode. | ||||
1 2 | Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Waltek Testing Group (Shenzhen) Co., Ltd.
|
||||
1 2 | Name |
J****** S****
|
||||
1 2 | Telephone Number |
86 75******** Extension:
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
j******@semtest.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412 | 2462 | 0.0169 | ||||||||||||||||||||||||||||||||||||
1 | 2 | 15C | 2402 | 2480 | 0.0005 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0029000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC