Product Introduction Front View:
Inside View:
Top Cover Paper Inlet Left Cover Opening Button Power Button Panel Right Cover Opening Button Paper Outlet Rear View:
Accessories Power Port Power Adapter*1 USB Cable*1 USB Port Loading the Ribbon 01 Open the top cover and then open the panel 02 Loading the Ribbon Install the ribbon into the printer by pinching the left and right wings of the ribbon with both hands. Open the top cover rst, then press the open cover button on both sides of the panel Note: The side with the anti-counterfeit label is facing the paper outlet. at the same time before lifting the panel upward. Putting in the paper 01 Putting in the A4 paper Tips:
All the drawings of product and accessories in the manual are for reference only. Putting in the A4 paper as shown, up to 20 sheets of A4 paper can be placed at once. Due to the updating and upgrading of the product, there may be some dierences between the actual product and the drawings, please refer to the actual product. For more product information, please contact HPRT customer service. Anti-Counterfeit Label 03 Close the Panel Turn the panel down and press it with both hands until you hear a "pop" sound. Product Name: AI Printer Dimensions: 295.5*147.3*69.3mm Product Model: GT1 Weight: About 1553g (excluded accessories) Input Parameter: DC 14V Operating Temperature:
0~40 Wi-Fi Connection: Wi-Fi IEEE 802.11b/g/n 2.4GHz Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd. Room 305A, Angye Building, Pioneering Park,Torch High-tech,Zone,Xiamen Add:
E-mail: support@hprt.com Web: www.hprt.com Power On 01 Connecting Power Plug the power cable into the power port on the back of the printer. 02 Power On Long press the power button for 3 seconds to power on the printer. 01 Download the APP Scan the QR code or search Hereprint in APP store to download the Hereprint APP. 02 Connect to printer via Wi-Fi Connect the mobile phone to Wi-Fi hotspot (select 2.4 GHz frequency band);
Open HerePrint App, click + in the top right corner of Home to add the device;
Select GT series according to the guide of App;
Enter the Wi-Fi password;
Waiting for the connection result. Encryption way No WiFi available nearby Printing Wirelessly from Mobile Phone 04 Cloud Remote Printing LED Indicator and Buzzer Denitions FCC WARNING The printer is on and the connected Wi-Fi hotspot can access the Internet;
Even when the printer is not around you, you can still choose the le to print via HerePrint App. After entering the print preview, send the data to the printer through remote printing. Error Status Status Print head temperature is too high Indicator Buzzer Red LED ashes rapidly Beep--beep beep--
Run out of ribbon Red LED ashes slowly Beep beep beep--
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Printing from Windows PC Connect one side of the USB cable to the PC and the other side to the printer;
Turn on the printer;
Download the driver program from HPRT website and install it in the PC;
Add the printer to the PC and print the documents from PC after establishing the connection. Out of paper Red LED ashes slowly Beep beep beep--
Any changes or modications not expressly approved by the party responsible for Red LED ashes rapidly Beep--beep--beep--
compliance could void the user's authority to operate the equipment. Cutter jam RFID error Red LED ashes slowly Printer cover is not closed Red LED is lighting
*Buzzer sounds for 5 seconds and then stops Printer Status Status Indicator
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful Note: Long press the power button can power o the printer. 03 Printing via LAN The printer is on and connected to the same Wi-Fi hotspot as mobile phone;
In HerePrint App, select the le to print, enter Preview and conrm the parameters, then your mobile phone can send data to the printer via LAN. Precautions The best operating temperature is 0~40, if the environmental temperature is too low or too high, the print quality may be aected. Please do not use the unocial adapter or ribbon to ensure the print quality. During printing, the area around the print head is very hot. Do not touch it, as you could be burned. Do not pull out paper by force during printing, or else it may damage the printer. In a domestic environment this product may cause radio interference. Power on process Red, green and blue LED ashes alternately interference to radio communications. Power o Printing Light o White LED ashes slowly Firmware update Red, green and blue LED ashes alternately Printer Status Status Indicator Bluetooth connecting Blue LED ashes rapidly In Wi-Fi connection Wi-Fi data receiving In USB connection USB data receiving White LED is lighting White LED ashes rapidly Green LED is lighting Green LED ashes rapidly No connection currently Blue LED is lighting However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2AUTE-8TT22G GT1