FCC ID: 2AUTE-FT800 Wireless Home Printer

Product Introducon Front View:

Operaon LED Indicator Connecon LED Indicator Power Buon Rear View:

Accessories Cover-opening Buon Paper Outlet Power Interface USB Interface Power Adapter 1 USB Cable 1 The power adapter varies by local or region. Loading Paper Roll 01 Open the top cover Push the cover-opening buons on both sides towards the paper outlet to open the top cover. Load the paper roll to the paper compartment again and pull some extra paper. Plug the power cord into the power interface on the back of the printer. Loading Paper Roll 03 Load the paper roll Pay aenon that the thermosensive layer should face up. Thermosensive layer Power On 01 Connect the power supply Tips:

All the drawings of product and accessories in the manual are for reference only. Due to the updang and upgrading of the product, there may be some dierences between the actual product and the drawings, please refer to the actual product. For more product informaon, please contact HPRT customer service. 02 Remove the paper roll 04 Close the top cover 02 Power On Remove the supplied paper roll and tear it apart along the edge. Close the top cover aer loading paper. Please make sure both sides click into place. Hold down the power buon for 3 seconds to start the printer. 01 02 03 04 Please purchase and use HPRT ocial thermal paper. To turn o the printer, also hold down the power buon for 3 seconds. HPRT AI Printer Product Name: AI Printer Dimensions: 314 x 159.5 x 92mm Product Model: FT800 Weight: About 1.8kg (excluded accessories) Input Parameter: DC 14V/3A Operang Temperature:

0

~40 Execuve Standard: GB4943.1-2011, GB/T9254-2008, GB 17625.1-2012 Wi-Fi Connecon: Wi-Fi IEEE 802.11b/g/n 2.4GHz Manufacturer: Xiamen Hanin Electronic Technology Co.,Ltd. Add: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, China Tel: +86-(0)592-5885991 Web: www.hprt.com Product Homepage: .hprt.com Prinng Wirelessly from Mobile Phone Prinng from Windows PC LED Indicator and Buzzer Denions FCC WARNING 01 Download App Connect one side of the USB cable to the PC and the other side to the printer;

01 Operaon LED indicator, which shows the printer status itself Scan the QR code below to download H-Print App. Turn on the printer;

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired Download the driver program from HPRT website and install it in the PC;

Add the printer to the PC and print the documents from PC aer establishing the connecon. Status LED Indicator Buzzer operaon. Red LED ashes rapidly Beep-beep beep-

Red LED ashes slowly Beep beep beep-

Any changes or modicaons not expressly approved by the party responsible for compliance Red LED ashes rapidly Beep-beep-beep-

could void the user's authority to operate the equipment. 02 Connect to printer via Wi-Fi Connect the mobile phone to Wi-Fi hotspot (select 2.4 GHz frequency band);

Open H-Print App, click + in the top right corner of Home to add the device;

Select FT series according to the guide of App;

Enter the Wi-Fi password;

Scan the QR code on the boom of the printer and wait for the printer to complete Precauons Wi-Fi connecon. 03 Cloud Remote Prinng remote prinng. The best operang temperature is 0

~40

, if the environmental temperature is too low or too high, the print quality may be aected. Firmware update Red, green and blue LED ashes alternately 02 Connecon LED indicator, which shows the connecon status of printer Please do not use the unocial adaptor or paper roll to ensure the print quality. Status LED Indicator The printer is on and the connected Wi-Fi hotspot can access the Internet;

During prinng, the area around the thermal print head is very hot. Do not touch In Wi-Fi connecon White LED is lighng Even when the printer is not around you, you can sll choose the le to print via it, as you could be burned. Wi-Fi data receiving White LED ashes rapidly H-Print App. Aer entering the print preview, send the data to the printer through Do not pull out the paper by force during prinng, or else it may damage the printer. In USB connecon Green LED is lighng This is a Class A product. In a domesc environment this product may cause radio USB data receiving Green LED ashes rapidly interference in which the user may be required to take adequate measures. No connecon currently Light o NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separaon between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Red LED ashes slowly Printer cover is not closed Red LED is lighng Error Status Print head temperature is too high Out of paper Cuer jam RFID error Printer Status Status Power on Power o Prinng LED Indicator White LED is lighng Light o White LED ashes slowly 05 06 07 FT800

Wireless Home Printer o HPRT

#5/Model: FT800 ABB Power Input: 14V =-3A SOCAB TE BR PLEASE USE THE POWER SUPPLY PROVIDED ONLY. ie: BTR FRAAIRAS) Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. ORG FCC ID: 2AUTE-FT800 PEBHE MADE IN CHINA CMIIIT ID:2020DP 15063 SN:XXXXXXXXXXXXXXXX BT MAC:XX:XX:XX:XX:XX:XX C E 10 SSID:XXXXX-XXXX

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048

<2021-06-17>

TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID Model name 2AUTE-FT800 FT800, Future800 For the product stated above, we request that the following information be held confidential;

Long-Term Short-Term Short-Term Exhibits Confidentiality Confidentiality Confidentiality Days External Photos L Internal Photos Block Diagram XII Schematics Test Setup Photos Users Manual Parts List Tune Up

XO Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,

(Signed) 'Qy Name: Qingin Yu Clin Fin yu Company: Xiamen Hanin Electronic Technology Co.,Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Phone: 15705965171 Fax: +86-(0)592-5930505 E-Mail: yugqingin@prttech.com

Declaration of Authorization We Name: Xiamen Hanin Electronic Technology Co.,Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, City: Xiamen State: N/A Country: China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Wireless Home Printer Type designation: FT800, Future800 Trademark: HPRT, iDPRT FCC ID: 2AUTE-FT800 on our behalf. Date: 2021-06-17 City: Xiamen Name: Qingin Yu Function: Certified Engineer Signature: & infin J. Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

Model Declaration Letter We, the undersigning company Company Name: Xiamen Hanin Electronic Technology Co.,Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Hereby confirm that the following products:

Product description: Wireless Home Printer Type designation: FT800, Future800 Trademark: HPRT, iDPRT That All versions of the Model FT800 and Future800 are electrically equal except the following difference:

Only differ in model name, the internal circuit, panel, enclosure and power board are all the same. Date: 2021-06-17

(Signed) quit Yu Name: Qingin Yu Company: Xiamen Hanin Electronic Technology Co.,Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Phone: 15705965171 Fax: +86-(0)592-5930505 E-Mail: yugingin@prttech.com

<Xiamen Hanin Electronic Technology Co.,Ltd.>

<Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China>

Date: 2021-06-17 FCC ID: 2AUTE-FT800 Model Number: FT800, Future800 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Xiamen Hanin Electronic Technology Co.,Ltd. declare that this EUT (FCC ID:

2AUTE-FT800) doesnt have Ad Hoc mode function on on-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Gigned) Tn YU Name / Title: Qingin Yu / Certified Engineer Company: Xiamen Hanin Electronic Technology Co.,Ltd. Address: Room 305A, Angye Building, Pioneering Park, Torch High-tech,Zone, Xiamen, China Phone: 15705965171 Fax: +86-(0)592-5930505 E-Mail: yuqingin@prttech.com