Smart Folding Exercise Bike with Backrest and Pulse Model: SXB1000 FCC ID:2AR8P-HONGYUAN203 Last Modified: Dec 1, 2018 Item# M1B1 Email: support@sharevgo.com Owners Manual M1B1 ShareVgo Smart Folding Exercise Bike Before You Begin Welcome to the ShareVgo community. Before beginning assembly, take a few moments to familiarize yourself with important information on how to use our ShareVgo Smart Folding Exercise Bike safely so that you and your loved ones do not get hurt. Lets review the safety notes and warnings now. If you have any questions, please contact support@sharevgo.com Safety Instructions CAUTION WARNING WARNING To reduce the risk of serious injury, read carefully the following Safety Instructions before using this product. Consult your physician before starting an exercise program or using the exercise equipment. Maximum weight capacity is 250 pounds. 1. Consult your physician before using. Stop immediately and consult your physician if you feel faint, dizzy, or experience pain during exercise. 2. Carefully read all warnings and cautions before using this equipment. 3. We recommend two people be available to assemble this product. 4. Do not let children under the age of 12 use this product without proper adult supervision. 5. Keep children, your fingers, body parts, and pets away while in use. 6. Set up and operate this product on a solid and level surface with a mat beneath it. 7. Make sure that adequate space is available for access to and around it. 8. Before using, inspect this product for worn or loose components, and securely tighten or replace any worn or loose components prior to use. 9. Do not wear loose or dangling clothing while using this product. 10. Always wear correct footwear and never exercise in bare feet or socks. 11. This equipment should not be used by persons weighing over 250 pounds. 12. Used by only one person at a time. 13. This equipment is for indoor, household and non-commercial use only. 2 M1B1 ShareVgo Smart Folding Exercise Bike User manual warning statement Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 3 M1B1 ShareVgo Smart Folding Exercise Bike Part Drawing 4 M1B1 ShareVgo Smart Folding Exercise Bike NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28L/R 29 30A 30B 31 32 33 34 35 Description Monitor UniversalTabletHolderPost FoamGrip23*5*350 FrontArmrest HandlePulseSensor HandlePulseJack ScrewST4*19*7 Washerd6*12*1 EndCap25*16 BoltM8*40*20*S6 ArcWasherd8*20*2*R16 Monitor/TabletPlate ScrewM5*12*10 RearMainFrame BoltM5*16 Washerd5 SensorWire TensionKnob BoltM8*35*18*S6 TabletHolder BoltM8*16*S6 Washerd8*25*2 Spindle Bushing28*3*21.8*7*17 FrontMainFrame LimitMat KnobM16*1.5*22*37 PedalL/R EndCap FrontBaseTubes RearBaseTubes ArcWasherd8*20*2*R30 NutM8*H16*S13 SquareBoltM8*50*20*H5 SquareBoltM8*45*20*H5 HandlebarSupportPlate Part List NO. 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58L/R 59 60L/R 61 62 63 51 52 Qty 1 1 2 1 2 1 2 2 4 2 2 1 2 1 1 1 1 1 1 1 2 2 1 6 1 1 1 2 2 2 2 4 6 4 2 1 Description FoamGrip23*5*450 Washerd8*16*1.5 RearHandlebar BushingF38*38*F30*30*L96 NutM8*60*30 Washerd8*20*2 SaddleTrench NutM8*H7.5*S13 SaddleBaseTube BoltM8*55*20*S6 Pin8*52*59 Saddle BackrestPad EndCapJ40*20*17 BackrestPost BoltM8*30*S6 Sensor Plug12*11*3 WrenchS131415 WrenchS6 EndCap BoltM8*10*S6 ShroudL/R FrontShroud CrankL/R PlugforCrank Water Bottle Holder BoltM5*10 BoltM8*30*S6 Sensor Qty 2 11 1 1 1 1 1 5 1 1 1 1 1 3 1 4 1 2 1 1 2 2 2 1 2 2 1 2 4 1 5 M1B1 ShareVgo Smart Folding Exercise Bike Step 1 - Base Tubes and Pedals Assembly 1-1: Attach the Front Base Tube (30A) to the Front Main Frame (25) and secure it by using 2 Square Bolts (33), 2 Arc Washers (31), and 2 Nuts (32). Attach the Rear Base Tube (30B) to the Rear Main Frame (14) and secure it by using 2 Square Bolts (33), 2 Arc Washers
(31), and 2 Nuts (32). NOTE: Match pedals & cranks with L or R as marked. The cranks thread will be damaged if the pedal is incorrectly attached or incorrectly turned. 1-2: Attach the Left Pedal (28L) to the Left Crank (60L) with counter clockwise turns. Use the Wrench (54) to tighten the pedal into place. 1-3: Attach the Right Pedal (28R) to the Right Crank (60R) with clockwise turns and tighten it with the Wrench (54). TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME.
#33 M8x50x20xH5 4PCS
#31 d8x 20x2xR30 4PCS
#32 M8xH16xS13 4PCS 6 M1B1 ShareVgo Smart Folding Exercise Bike 2-1 Facing Up 4 2-2 2-3 Step 2 Handlebar and Saddle Assembly 10 11 12 14 44 43 37 47 5 42 41 40 2-1: Attach the Front Handlebar (4) with the Handle Pulse Sensors (5) facing up, and at the same time, attach the Monitor/Tablet Plate (12) to the Main Frame (14) using 2 Bolts (10) and 2 Arc Washers (11). 2-2: Detach the Saddle Base Tube (44) from the Saddle Trench (42) by unscrewing and releasing the Knob (40). NOTE: DO NOT lose Washer (41). 2-3: Remove the pre-installed 3 Nuts (43) and 3 Washers (37) from the Saddle (47). 2-4: Attach the Saddle (47) to the Saddle Base Tube (44) with 3 Nuts (43) and 3 Washers (37). 2-5: Re-attach the Saddle (47) and the Saddle Base Tube (44) to the Saddle Trench (42) by tightening the Knob (40) with the Washer (41). TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME.
#10 M8x40x20xS6 2PCS
#11 d8x 20x2xR16 2PCS
#37 d8x 16x1.5 3PCS
#43 M8xH7.5xS13 3PCS 2-4 43 37 44 2-5 47 44 42 41 40 47 7 M1B1 ShareVgo Smart Folding Exercise Bike Step 3 Backrest and Rear Handlebar Assembly 50 43 37 3-1 3-2 46 45 44 44 38 32 37 35 34 34 32 37 3-3 42 40 3-1: Attach the Backrest Post (50) to the Saddle Base Tube (44) and secure it at the lower hole using Bolt (45), Washer (37), and Nut (43). Insert Pin (46) into the upper hole. 3-2: Attach the Rear Handlebar (38) and the Handlebar Support Plate (35) to the Saddle Base Tube (44) using 2 Square Bolts (34), 2 Washers
(37), and 2 Nuts (32). 3-3: To adjust the saddle horizontally, unscrew the Knob (40) and move the saddle forwards and backwards. Once at desired position, be sure the Knob (40) is fully tightened. 3-4: To adjust the saddle vertically, unscrew and pull the Knob (27) and move the Saddle up and down. Be sure Knob (27) locks securely into a hole before use. TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME. 3-4 25 27 8
#46 8x52x59 1PC
#45 M8x55x20xS6 1PC
#37 d8x 16x1.5 3PCS
#43 M8xH7.5xS13 1PC
#34 M8x45x20xH5 2PCS
#35 1PC
#32 M8xH16xS13 2PCS M1B1 ShareVgo Smart Folding Exercise Bike 4-1 1 4-2 1 Step 4 Monitor 4-1: Open the cover at the back of Monitor (1), install the 2 AAA batteries into the slot and then close the cover. 4-2: Remove the 2 pre-installed Screws (13) from the back of the Monitor (1). 4-3: Attach the Monitor (1) to the front of the Monitor Plate (12) using 2 Screws (13). 4-4: Connect the Sensor Wire (17) to the Monitor Sensor Wire (1a) and make sure it is properly connected. Plug the Handle Pulse Jack (6) into the Pulse Port at the back of Monitor (1). TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME. 13 9 M1B1 ShareVgo Smart Folding Exercise Bike Step 5 Tablet Holder Assembly &
5-1 20 2 5-2 5-1:
Attach the Tablet Holder (20) to Tablet Holder Post (2) using Bolt (19), Washer
(37), and Nut (43). Then, attach the Post (2) to Main Frame
(14) using 2 Bolts (57) and 2 Washers
(37). 5-2: Attach the Water Bottle Holder (62) to the Main Frame (14) using 2 Bolts (63). NOTE: The Water Bottle Holder is designed to be installed at the left side of the back of Tension knob with an angle of about 15 degree for easy accessibility. TIGHTEN ALL NUTS, BOLTS, AND SCREWS AT THIS TIME. 62 63 10 M1B1 ShareVgo Smart Folding Exercise Bike Monitor Operation & Function MODE button:
1. Press to select functions. 2. Press and hold 3-5 seconds to reset time, distance, calorie values to zero. Operations:
1. SCAN: Press MODE until SCAN appears. The monitor will rotate through all 6 functions: Time, Speed, Distance, Calorie, Odometer, and Pulse. Each function will be displayed for 5 seconds. 2. TIME: Displays the total amount of time exercised. 3. SPEED: Displays the current speed. 4. DIST: Displays the total distance traveled. 5. PULSE: Displays your current pulse. Your hands must be placed on the metal contact pads for 6-7 seconds or the machine will not be able to accurately read your pulse. The monitor will display pulse in beats per minute (BPM). NOTE: In the first 2-3 seconds, the monitor may display a higher pulse than your actual pulse. Once your hands are settled, the machine will display your actual pulse. The measurement should not be treated as the basis for medical purposes. Note:
1. If the display is faint or will not display properly, replace the batteries. 2. The monitor will automatically shut off if it does not receive signal after 4 minutes. 3. The monitor will turn on when you begin using the exercise bike or by press the MODE button. 4. The monitor will begin calculating when you begin exercising and will stop calculating when you stop exercising for four seconds. Specifications:
FUNCTION SCAN TIME SPEED DISTANCE PULSE BATTERY TYPE OPERATING TEMPERATURE STORAGE TEMPERATURE 5 seconds per display 00:00~99:59 The maximum signal it can pick up is 999.9 Mile/H 0.0~9999 Mile 40~240 BPM 2pcs of SIZE AAA 0C ~ +40C
-10C ~ +60C 11 M1B1 ShareVgo Smart Folding Exercise Bike Connecting to Mobile Device STEP 1 - Get it assembled Make sure your equipment is assembled properly, batteries are installed, and the monitor is ON. STEP 2 - Get the app Download the ShareVgo Fitness app from Google Play or the App StoreTM on a compatible phone or tablet. STEP 3 - Set up Follow the on-screen steps to register your equipment and sign-up an account. STEP 4 - Congratulations!
You are all set! Lets start exercise and enjoy healthier life. To learn more, visit www.sharevgo.com/faq Apple and the Apple logo are trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. 12 M1B1 ShareVgo Smart Folding Exercise Bike R Connecting to Mobile Device FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is Increase the separation between the equipment and receiver. connected. Consult the dealer or an experienced radio/TV technician for help. This device meets the FCC and IC requirements for RF exposure in public or uncontrolled environments. 5 5 i n 28in n i 2 2 13 M1B1 ShareVgo Smart Folding Exercise Bike Maintenance and Storage 14 M1B1 ShareVgo Smart Folding Exercise Bike Inspect all parts and make sure all nuts, bolts, and screws are completely tightened before each use. To clean, wipe this equipment with a damp cloth. DO NOT use abrasive cleaners or solvents. Store your equipment at a stable position, in clean and dry environment away from children. 15 M1B1 ShareVgo Smart Folding Exercise Bike Product Warranty 90-day Limited Warranty ShareVgo, LLC. warrants that this product will be free from defects in materials and workmanship for a period of 90 days from date of purchase when purchase of the product is from an authorized retailer and is used for the purpose intended, under the conditions that it has been installed and operated in according to ShareVgos Owners Manual. ShareVgos obligation under this warranty is limited to replacing free of charge, any parts which may prove to be defective under normal household and personal use. This warranty does not include any damage cause by improper operation, misuse or commercial application. This warranty applies only to the original purchaser and is not transferable. Proof of purchase is required. YOU EXPRESSLY UNDERSTAND AND AGREE THAT, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, SHAREVGO SHALL NOT BE LIABLE TO YOU UNDER ANY THEORY OF LIABILITY (WHETHER CONTRACT, TORT (INCLUDING NEGLIGENCE), BREACH OR FAILURE OF ANY WARRANTY OR OTHERWISE) FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES THAT MAY BE INCURRED BY YOU IN CONNECTION WITH YOUR ShareVgo Smart Exercise Bike OR THESE TERMS, INCLUDING ANY LOSS OF DATA, WHETHER OR NOT SHAREVGO OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF OR SHOULD HAVE BEEN AWARE OF THE POSSIBILITY OF ANY SUCH LOSSES ARISING. YOU EXPRESSLY UNDERSTAND AND AGREE THAT, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SHAREVGOS TOTAL LIABILITY IN CONNECTION WITH YOUR SMART EXERCISE EQUIPMENT OR THIS LIMITED WARRANTY WILL NOT EXCEED THE AMOUNT YOU ACTUALLY PAID SHAREVGO FOR YOUR EQUIPMENT Some states, provinces or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from jurisdiction to jurisdiction. Customer Service To request product service and order replacement parts, please have the following information ready and email to support@sharevgo.com:
1. Your name 2. Receipt of purchase 3. Model number 4. Description of part 5. Part number Copyrighted 2018 ShareVgo, LLC 16