FCC ID: 2AJ55HOLYSTONEMJ RC quadcopter

GD 8K Instructions For Use V1.4 16+. Ophelia (HS700) usa@holystone.com (USA) eu@holystone.com (EU) ca@holystone.com (CA) jp@holystone.com (JP)

) 1855) 888-6699 www.holystone.com Ses OBA G RW LO) p |=

Instructions For Use a 16+. Ophelia (HS700)

|| Vel arolNVarolgt ReclgiUSY\ AUC aTelN Cela\Kee din (16) ca@holystone.com (CA) jp@holystone.com (JP)

| Meeaieeewecr www.holystone.com CH a Contents 1.0 Disclaimer&Warning .... 2.0 Safety Guidelines ..... 3.0 Maintenance ... 4.0 Package Contents .... 5.0 Installation 5.1 Phone Holder... 5.2 Camera... 5.3 Landing Gear-...... 5.4 Propellers 6.0 Drones Details 7.0 Transmitter Details 8.0 Charging . 9.0 Operation Guide 9.1 Download APP ..... 9.2 Transmitters Battery 9.3 Drones Battery ..... 9.4 Paring . 9.5 Initialization Detection .... 9.6 Calibrate the Gyro .. 9.7 Compass Calibration 9.8 Using the Application . 9.9 Unlock... 9.10 One Key Takeoff/Landing ..... 9.11 Flight Control .. 10.0 Functions Details 10.1 Transmitter Calibration 10.2 Headless Mode ... 10.3 Return to Home..... 11.0 Specifications . 12.0 Trouble Shooting 13.0 General Information aou-=

1.0 DISCLAIMER & WARNING 1. Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 16, By using this product, you hereby agree to this disclaimer and signify that you have read it fully, You agree that you are responsible for your own conduct and any damaged caused while using this product, and its consequences . You agree to use this product only for purposes that are proper and in accordance with local regula-

tions, terms and all applicable polices and guidelines Holy Stone may make available. 2. When using this product, please be sure to strictly abide by the specification requirements and safety guidelines stated in this document. Any personal injury property damage, legal disputes and all other adverse events caused by the violation of the safety instructions or due to any other factor, WILL NOT be Holy Stones responsibility. 2.0 SAFETY GUIDELINES 2.1 Check Before Use:

@ This product is not a toy, but it is a high precision drone that integrates various electronic stability and control mechanisms. Please be sure to setup this drone carefully and correctly to ensure safe, accident-free operation.

@ Please be sure that the batteries of the drone and transmitter are clean, undam-

aged. Please be sure that all the propellers are undamaged and are installed in the right orientation.

(eoTal talc}

1.0 Disclaimer&Warning .... 2.0 Safety Guidelines ..... 3.0 Maintenance ... 4.0 Package Contents .... MOM ante le(ela) 5.1 Phone Holder .... AGT ee 5.3 Landing Gear-...... 5.4 Propellers 6.0 Drones Details 7.0 Transmitter Details 8.0 Charging . 9.0 Operation Guide 9.1 Download APP ..... PVA TaN acl SrA 1tKcA Ng 9.3 Drones Battery ..... 9.4 Paring . 9.5 Initialization Detection .... MG] 10) -1om alone) cee 9.7 Compass Calibration 9.8 Using the Application . 9.9 Unlock... 9.10 One Key Takeoff/Landing ..... 9.11 Flight Control . 10.0 Functions Details 10.1 Transmitter Calibration 10.2 Headless Mode ... 10.3 Return to Home...... 11.0 Specifications . 12.0 Trouble Shooting 13.0 General Information aou-=

er ee Ze) Pg aC eRe ome eY Cita eR NCD ee Re ae Wale Rol meie\e ela Soles ea a aCe ae Roscoe Aa mt te kel Om SNAU sate R ge cere Mae CoV coe SONS ea alae aA ao PeMaccela NACE Ko Taste rat seale ome Ngo akecate Vata r ag damaged caused while using this product, and its consequences . You agree to use this product only for purposes that are proper and in accordance with local regula-

Fela Crane oo (ee Mee coe el elo an OV ARCO MA EY 2. When using this product, please be sure to strictly abide by the specification roe Oca ae Re Come We ce ee ce MN Me ole a een ag eee tMC Ee Meee Note nee Mel ae aCe ea violation of the safety instructions or due to any other factor, WILL NOT be Holy lela eat rsroa oN 2.0 SAFETY GUIDELINES 2.1 Check Before Use:

@ This product is not a toy, but it is a high precision drone that integrates various Col attela oC OAR Tare Raele Ce MOR ASIN OCS CC ORC OM AC Colao fee mre Reece ACR a Ne Re eele acter tea)

@ Please be sure that the batteries of the drone and transmitter are clean, undam-

aged Please be sure that all the propellers are undamaged and are installed in the remmeremeliog Holy. STONE

@ Please do a thorough check of the product before each use. Check for firmness of the parts, any signs of cracks and wear of the propeller, battery power and effectiveness of the indicator, etc. If after doing a complete check any issues is found, please refrain from using the product until the issue has been taken care for. 2.2 Flight Environment:

| ee Fly in Open Areas Maintain Line Fly Below of Sight 393.6 feet (120 m) 6 lk Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airport or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. Don't use this drone in adverse weather conditions such as rain, snow, fog, and wind. Gp ieke 2.3 Operations Requirements:

@ Please don't use this product to follow any moving vehicles During the flight, only turn off the motor in case of an emergency.

@ Please flight the drone back to you as soon as possible when the battery is running low.

@ This product should not be used while drinking alcohol, if you are feeling fatigued, taking medicine, or feeling any physical discomfort

@ Beware of the noise volume the drone produces. Keep your distance to avoid ear damage. OQ ( &) Stay away from the rotating _@ Don't fly in the No-Fly Zone. Propellers and motors. 2.4 Use of Battery:

@ Please ensure batteries are fitted in the correct orientation as shown in the instruction manual

@ Avoid short circuits by fitting the batteries incorrectly, and do not crush or squeeze the batteries as this could carry the risk of an explosion.

@ Do not mix new and old batteries as this can lead to a poor performance of the product.

@ Dispose used batteries carefully, do not litter.

@ Please keep dead batteries away from heat and fire.

@ If the device is not going to be used for an extended period of time, remove batteries to prevent potential damage from battery leakage.

-3-

gfe iS

@ Please do a thorough check of the product before each use. Check for firmness of the parts, any signs of cracks and wear of the propeller, battery power and effectiveness of the indicator, etc. If after doing a complete check any issues is found, please refrain from using the product until the issue has been taken care for pare alfelal a aie a ale i a >

Fly in Open Areas eae ar ata of Sight 393.6 feet (120 m) Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airport or bodies of water. DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. Don't use this drone in adverse weather conditions such as rain, snow, fog, and wind. 2.3 Operations Requirements:

@ Please don't use this product to follow any moving vehicles

@ During the flight, only turn off the motor in case of an emergency.

@ Please flight the drone back to you as soon as possible when the battery is running low.

@ This product should not be used while drinking alcohol, if you are feeling fatigued, taking medicine, or feeling any physical discomfort.

@ Beware of the noise volume the drone produces. Keep your distance to avoid ear damage Tn ) 2) r ) Rae ee OL oo Propellers and motors. 2.4 Use of Battery:

CON TOM og O oor co Coa Coe Ma Ua ee cra eld al) Cog eno OM a Laksig0 (ai ea atr=)a0r<1F Avoid short circuits by fitting the batteries incorrectly, and do not crush or squeeze the batteries as this could carry the risk of an explosion. CPN area dae a eRo eke ee Sa Seal core Mok S ues clei econ a product. CUM Is elonceON col ecu a Ke-]ca0 Velen pela ag OM ered alco rate Borla oA a alee RCs If the device is not going to be used for an extended period of time, remove batteries to prevent potential damage from battery leakage. Holy. STONE If the device is not going to be used for an extended period of time, remove batteries to prevent potential damage from battery leakage

@ It is recommended to only use the USB charging cable that comes with the drone to charge the battery. Don't connect the battery directly to wall outlets or car cigarette lighter sockets.

@ Don't attempt to disassemble or modify the battery in any way.

@ Don't use the battery if it gives off an odor, generates heat, becomes discolored or deformed,or appears abnormal in any way. IF the battery is in use or being charged, remove it from the device or charger immediately and discontinue use.

@ Don't pierce the battery casing with a nail or other sharp object, break it open with a hammer, or step on it!

Always charger the batteries in a fireproof container and away from combusti-

ble material. Don't charge on surfaces that can catch fire-this includes: wood, cloth, carpet, or in the application's device.

@ Don't immerse the battery in water or allow it to get wet.

@ Don't solder battery terminal directly.

@ Keep battery out of reach of children or pets. Dont short-circuit the battery by connecting wires or other metal object to the positive|+) and negative(-) terminals Li-Po Battery Disposal & Recycling oy Waste Lithium-polymer batteries must not be placed with household trash, Please contact local environmental or waste agency or the waste agency

(EE the supplier of your model or your nearest Li-Po battery recycling center. 3.0 MAINTENANCE

@ Clean the product after each use with a clean, soft cloth.

@ Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the drone. This device is not waterproof and must not be submerged in water under any circumstance. Failure to maintain the device completely dry will result in the failure of the unit.

@ Check the charging plug and other accessories for signs of damage frequently. IF any part of the device is damaged, refrain from flying until maintenance can be carried out. Aya

If the device is not going to be used for an extended period of time, remove Peete Col eMac Re a Te fe CCNA Sc )e)

@ It is recommended to only use the USB charging cable that comes with the drone to charge the battery. LT lea ace aac tala = Nn Ae a ACN a ROO ce Xe me Melee KclCcea fe A mse la ats

(Operate tna eke vss) Remalere Nataael wala a ana

@ Dont use the battery if it gives off an odor, generates heat, becomes discolored Colm Celta se Rog] 11-1 aOUL a AAA SV OL Ae) charged, remove it from the device or charger immediately and discontinue use. C Velelaia ol ace ipied =] pea RYU BaHlRe Me) Ug af ORO 2) eka) oo SAR R eet memo One an

@ Aways charger the batteries in a fireproof container and away from combusti ble material. Don't charge on surfaces that can catch fire-this includes: wood, cloth,

(e-em anne] oleh Te (eo ear aemm MMe Ceke aaa

@ Don't solder battery terminal directly. C Vcc der yael tear aoa ecakom cs

@ Dont short-circuit the battery by connecting wires or other metal object to the positive(+) and negative(-] terminals Li-Po Battery Disposal & Recycling YY x AE a eg ca aaa ee RO ne Rey cM 6

(ee Rea ad rea ROR ens Rom ee ao oe Ce ROR ome a eg ed earn cana CRON a el

@ Clean the product after each use with a clean, soft cloth,

@ Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the cron This device is not waterproof and must not be submerged in water under any faire] ggtc- pM =) OK RCM ta-]/a1 ana Ae Ve Reet C-Ae NAN ean a ale td ogo ale

@ Check the charging plug and other accessories for signs of damage frequently. IF any part of the device is damaged, refrain from flying until maintenance can be carried out. 4.0 PACKAGE CONTENTS No. Part Name Picture Quantity 1 Drone > 1 2 Transmitter 1 3 Camera And 1 USB Data Cable | * J 4 Camera Holder - i 5 Phone Holder y . 1 6 Drone Battery 1 Tt Propellers 8 8 Landing Gear 2 Charge 9 Transfer Box 1 10 Balance Charger fy 1 11 USB Charging ~s, . Cables Y : |

12 Screwdriver - 1 13 Propeller 5 - 1 Spanner 14 Camera Mat 1 15 Battery charging Non Bag = 1 TF Card 16 tsatctincemen| [TE] 1

~6-

Qtr. 5.0 INSTALLATION 5.1 Phone Holder

@As shown on (Pic 1), install the phone holder to the transmitter.

@ Press the buckle on the phone holder to take it out. (Pic 2) 5.2 Camera

@ Attach the camera mat to the camera holder; (Pic 3)

@ Connect the USB date cable to the camera; (Pic 4) Install the camera to camera holder, and lock it; (Pic 5)

@ Install the camera holder to the drone, and connect the USB date cable to the drone and lock it. (Pic 6) Pic 4 Pic 3 Pic 5 4.0 PACKAGE CONTENTS No. Part Name ate delccd Quantity 1 Leyla a i y] Transmitter i ey Camera And a f USB Data Cable 4 lena eleag u By Phone Holder 1 6 [eet rsa i vA rere fe]

8 Landing Gear v4 Charge :

iu Dead u 7 10 Ce aekegr ite Cg | i in keane] F Cables 7 Screwdriver i rtels ie} i fl Occ ie ons F 15 Cena ge la) rl Ea] i xo Tn cen ed) H

~6-

Aa 5.0 INSTALLATION 5.1 Phone Holder

@As shown on (Pic 1), install the phone holder to the transmitter.

(OTT osa trae Kola ale aoa holder to take it out. (Pic 2) 5.2 Camera

@ Attach the camera mat to the camera holder; (Pic 3) Connect the USB date cable to the camera; (Pic 4)

@ Install the camera to camera holder, and lock it; (Pic 5)

@ Install the camera holder to the drone, and connect the USB date cable to the drone and lock it. (Pic 6) i s

, Pic 4 Oe 5.3 Landing Gear

@ Make the A side of the landing gear aim at the A hole on the drone; (Pic 7) Pic 7

@ Rotate the landing gear inward, then push the B side of landing gear to the B" hole on the drone to complete instal-

lation. (Pic 8) Pic 9

@ Press the buckle on the side of the landing gear, then can take it out. (Pic 9) Gite 5.4 Propellers

@ Installation: Install the propeller on the motor shaft according to the A/

B* corresponding position, and rotate to tighten the propeller according to the Lock icon on the propeller. (Pic 10)

@ Demolition Removal: Fix the brushless motor with propeller spanner and rotating it according the unlock icon on the propeller to take it out.

(Pic 11) Propeller A Propeller A Propeller B -

Landing Gear A 5.3 Landing Gear

@ Make the A side of the landing gear Cline i a eee Wa Ale] Re lan Cn Re 1Ce 01cm (a(R las

@ Rotate the landing gear inward, then moa push the B side of landing gear to the cH] B hole on the drone to complete instal-

lation. (Pic 8) ial]

@ Press the buckle on the side of the landing gear, then can take it out. (Pic 9) QteK. 5.4 Propellers Installation: Install the propeller on the motor shaft according to the A/

B" corresponding position, and rotate to tighten the propeller according to the Lock icon on the propeller. (Pic 10)

@ Demolition Removal: Fix the brushless motor with propeller spanner and rotating it according the unlock icon on the propeller to take it out. talon) 6.0 DRONES DETAILS oe eay elec oaaN SIC Propeller B Camera Holder <

keer)

Qtr. 7.0 TRANSMITTER DETAILS 7.1 Transmitter Functions:

Unlock. mes Stop Return to Home One-key fakeoft ianding |

9 WY ~ a VY am ON Power switch

<a mode switch _ mode switch LCD screen One-key take off / landing: One button take off, one button landing. Unlock/Emergency Stop:

Click@)", the motors rotate and the drone is unlocked Hold the button 3 seconds for emergency stop. Return to Home: The Return to Home function brings the drone back to the last recorded Home Point Photo / Video:

| to take photo, hold the button for 2 seconds to enter the video.

-10-

Hie GPS mode switch:

Slide the button to Slide the button to B", he drone exits the GPS Mode;

the drone turns on the GPS Mode. Headless mode switch:

Slide the button to A to exits the Headless Mode;

Slide the button to B to enter the Headless Mode. 7.2 LCD Screen Functions:

alll Signal Strength v CS GPS Mode Cw Video Vo}

Headless Mode ul Satelite Number Photo Hee Altitude (Meter) Model Teaeenracter ouG oe Throttle Mode Loe DASH Distance|Meter) seas Battery Level

@ One Key Return Rx in Drone Battery Level

-11-

HA A ee ee]

7.0 TRANSMITTER DETAILS 7 7 fel Ai lele (RIC WAT aol a fe mtaredele cola) he drone exits the GPS Mode;

Slide the button to B", the drone turns on the GPS Mode. Wires an bal ToS lle RNa}

Gne-key Emergency Stop ey Slide the button to A to exits the Headless Mode;

Oe itiy Rai car Slide the button to B to enter the Headless Mode, Cy ae 2) i y PVA RO PR Yo can eal tol acH a Pa Daa PR DD oe AT] | Coat . i] ais 0]

OFF ON Pea Signal Strength ee 1 } Sola ves ~

One-key take off / landing: One button take off, one button landing a eteted Altitude (Meter) | |

Unlock/Emergency Stop:

eed) eer ger tek taal oaccel ot aS aa Hold the button 3 seconds for emergency stop. SEW ane Return to Home: The Return to Home function brings the drone back to ota H Cea [eyelet Aer pVa Ra the last recorded Home Point. H Late) WAU Le (lod lela to take photo, hold the button for 2 seconds to enter the video. ae ete Qtr. 7.3 Mode Switch:

7.3.1 MODE 2 (Left hand throttle MODE 2 will be default setting) Left Joystick Right Joystick Forward ery) nore KX Sif" yout 5 Chron WS 7.3.2 MODE 1

@ Hold down the and then turn on the power switch;

Right Joystick Ascend 4

<a ae V y Down Backward Down Beserne ay KS Tum Rent Y Cory tonigne wimntey C im wy

-12-

8.0 Charging tom) io

| B : |

| b "USB Adapter

. {5V/2.0A) F 2) UE |

Charge Balance usB Power Bank Transfer Box Charger Charging Cable

@ Connect the Battery, Charge Transfer Box, Balance Charger and USB Charging Cable.

@ Connect the USB Charging Cable to Power Bank or a USB Adapter

(5V/2.0A )for charge. A e When the battery is charging, the green light will flash slowly and the red light will be on. e When the battery is fully charged, the green light and red light will be on. Before charging, please check the contents of the Use of Battery section of the Safety Guidelines carefully!

Please insert the plug in the correct way. If it is inserted in reverse, the red light will be on, the green light flash quickly, the battery will not be able to be charged.

-:O >: @

-13-

HA Peele (SW ala ls 7.3.1 MODE 2 (Left hand throttle MODE 2 will be default setting) Left Joystick rs ea rd rae Cd PyaaNee CK SDV ue) re a. Se fcofae runt YC rmane | Stef ccn fae" ry rotena Goery oman xy a 7.3.2 MODE 1

@ Hold down the and then turn on the power switch;

N

@ Press the (@

ovelcola bees ee)ale scoala OB) am Ried Right Joystick t ae t

=) Eo}

i Y i ae a ~

eeu SC are | SAREE syrupy

-12-

A el 8.0 Charging a ey) UPN cg EVA aa) |

i celal Lr (cE Ps) a AC Ta (ok OR

@ Connect the Battery, Charge Transfer Box, Balance Charger and USB Charging Cable

@ Connect the USB Charging Cable to Power Bank or a USB Adapter

(5V/2.0A )for charge. ry When the battery is charging, the green light will flash slowly and the red light will be on. When the battery is fully charged, the green light and red light will be on. Before charging, please check the contents of the Use of Battery section of the Safety Guidelines carefully!

Coo a last aon 0M aN a eee ce O(a a Sele Naam eal ae |

light will be on, the green light flash quickly, the battery will not be able to be charged. lad A) tad BC) ee rr 9.0 OPERATION GUIDE All of the following operations on this manual under MODE 2. 9.1 Download APP Android APP on Google play Connect to the App Store or Google Play and download the Ophelia GPS application for free. 9.2 Transmitters Battery the transmitter 4x 1 5VAA

(Not included) A Always pay close attention to battery polarity when installing the batteries to make sure they are fitted correctly.

=14-

S SBE 9.3 Drones Battery Installation:

Insert battery into drone. Make sure that you hear a click sound indicating the battery is firmly installed. 8 Battery Removal:

Press the buckle on the back of the battery while pulling backwards to remove the battery. 2y5=

A OT 9.0 OPERATION GUIDE All of the following operations on this manual under MODE 2. 9.1 Download APP rox TC a Ea Connect to the App Store or Google Play and download the Ophelia GPS application for free. PAPE ee Sola a cnc 4x 1LSVAA

(Not included) yy Always pay close attention to battery polarity when installing the batteries to make sure they are fitted correctly.

=e a PCM) col aT eM Tle Installation:

Insert battery into drone. Make sure that you hear a click sound indicating the battery is firmly installed. Battery Removal:

Press the buckle on the back of the battery while pulling backwards to a roanle oR tae ey toa co 9.4 Pairing

@Hold the (@) * button and slide the |

power switch to the right to power on the 20 transmitter. Ey oN 1) Cc

@nstall the battery and place the drone on a level surface with the head forward. The * ull icon on the transmitter LCD screen is full, it means that the drone has pairing with the transmitter successfully. 9.5 Initialization Detection Place the drone on the level surface and enters the Initialization Detection. At this point, the yellow, green and red LED lights of the drone will flicker alternately for about 7 seconds to complete the initial detection. At this time, the front and back yellow LED lights of the drone will flicker alternately.

-16-

Qtew. CT 9.6 Calibrate the Gyro Push both of the joysticks down to the bottom left. the green LED light will flash. Once the front and back yellow LED lights of the drone flicker alternately, it means the calibration is completed. 9.7 Compass Calibration

@ Hold the drone horizontally and rotate the drone for about 3 circles And the Qi LED lights of the drone will keep blink (Pic 1)

@ Hold the drone vertically and rotate the drone for about 3 circles. The front @ lights and the rear Yellow) light will turn to solid.(Pic 2)

-17-

Peale |

@Hold the C} Ca toa eeate nse Maia Nay, feleiValm\iVC@ anon Alea t(e placename lak alcd transmitter.

@nstall the battery and place the drone Cola R- Meo S01i (6A NVIAR Alaa ROA UV=I66}

OMI at MacogRo Nanci akeD Rota 0] aes ata Colgolatenar- 99-1 eR AN oR ee A NE Colm Oe en SS0) NZ PAM laliiclirclicolam Bitca t(ol a) Place the drone on the level surface and enters the Initialization Detection. At this point, the yellow, green and red LED lights of the drone will flicker alternately for about 7 seconds to complete the initial detection. At this time, the front and back yellow LED lights of the drone will flicker alternately. So A i 9.6 Calibrate the Gyro Push both of the joysticks down to the bottom left. the green LED light will flash. Once the front and back yellow LED lights of the drone flicker alternately, it means the calibration is completed. 9.7 Compass Calibration

@ Hold the drone horizontally and rotate the drone for about 3 circles. And the QP LED lights of the drone will keep blink. (Pic 1)

@ Hold the drone vertically and rotate the drone for about 3 circles. The front @ lights and the rear >

light will turn to solid.(Pic 2) ra) ear]

le A 9.8 Using the Application Connect your smart phone to the Wi-Fi of the Drone and check the drones status on the Ophelia GPS App.

@0On your smartphone, launch a search of the available Wi-Fi networks:

@ Select the Wi-Fi network: HolyStoneFPV_###8*

wait for your smartphone connect to the Wi-Fi network of the drone. This connection is generally represented by the Wi-Fi logo appearing on your smartphones screen

@ Enter the Ophelia GPS application.

> The connection between your smartphone and the Drone is estab-

lished automatically.

( Open the phone holder and put the phone.)

-18-

Qione 9.9 Unlock 9.9.1 Unlock the drone:

After the Compass calibration is completed, unlock the drone to fly. Method 1: Press the Unlock button (Pic 1). The motors rotate and the drone is unlocked. Method 2: Push the left stick to lower right corner and the right stick to the lower left corner at the same time (Pic 2) to unlock the drone. So Pic 1 Pic 2 A Tips:

After unlock the drone, the motor will automatically stop rotating if you didnt fly the drone within 10 seconds. 9.9.2 Lock the drone:

After the drone lands on the ground, pull down the throttle stick to the bottom position and keep for 3 seconds, the motor will stop immediately. And the drone is locked. Left Joystick

-19-

A 9.8 Using the Application Connect your smart phone to the Wi-Fi of the Drone and check the drones status on the "Ophelia GPS App.

@0On your smartphone, launch a search of the available Wi-Fi networks:

@ Select the Wi-Fi network: HolyStoneFPV_####

Wait for your smartphone connect to the Wi-Fi network of the drone This connection is generally represented by the Wi-Fi logo appearing on Solas lR1e ale aioe)

@ Enter the Ophelia GPS application.

> The connection between your smartphone and the Drone is estab-

UiSaisto = 16 1ce yap! 0(@=]1

(ese)

({ Open the phone holder and put the phone.) ato A 9.9 Unlock 9.9.1 Unlock the drone:

After the Compass calibration is completed, unlock the drone to Lia Method 1: Press the Unlock button (Pic 1). The motors rotate and the drone is unlocked. Method 2: Push the left stick to lower right corner and the right stick to the lower left corner at the same time (Pic 2) to unlock the drone. Lala A Tips:

After unlock the drone, the motor will automatically stop rotating if you didn't fly the drone within 10 seconds. 9.9.2 Lock the drone:

After the drone lands on the ground, pull down the throttle stick to the bottom position and keep for 3 seconds, the motor will stop immediately. And the drone is locked. Reread Se 9.10 One Key Takeoff/Landing

@ After drone unlocked, press the One Key Takeoff/ Landing button, the drone will automatically takeoff and hover at about 7~1 | feet altitude.

@ When the drone is flying, press the One Key Takeoff/ Landing button again, the drone will automatically land on the ground. 9.11 Flight Control Control the flight by using joysticks. Left Joystick Right Joystick KS FlytoLeft <)> Fly to Right KOM

-20-

Qtew. rr 10.0 FUNCTIONS DETAILS 10.1 Transmitter Calibration

+ Control sticks calibration has been completed by default. It is not necessary to calibrate the control stick unless pilot has felt abnormal stick travel.

+ Please do not power on your drone when calibrate the con-

trol stick for the remote controller.

@ Hold down the *

on the transmitter; (Pic 1) button while turn

@ Press "(3)" for 3 seconds, the transmitter send out 3 beeps; (Pic 2)

@ Maximum rotate both of left and right joysticks to any direction for 2 circles; (Pic 3)

@ Press " for 3 seconds, the transmitter send out 3 beeps again, it means that Transmitter Calibration is completed. (Pic 4) Pic 4

-21-

9.10 One Key Takeoff/Landing

@ After drone unlocked, press the One Key Takeoff/ Landing button, the drone will automatically takeoff and hover at about 7~ 11 feet altitude.

@ When the drone is flying, press the One Key Takeoff/ Landing button again, the drone will automatically land on the ground. By a

~ _ ares 9.11 Flight Control Control the flight by using joysticks. TRoie rad Right Joystick

' Ay

OS

' t 7 o>. eee eo ons CG oe ee ye a 10.0 FUNCTIONS DETAILS 10.1 Transmitter Calibration

+ Control sticks calibration has been completed by default. It is Farol mal leccnxt. ayo ec] 1e-KM aloo a tke Tele a0 a) (ext e o)]0lm gros abnormal stick travel.

+ Please do not power on your drone when calibrate the con-

trol stick for the remote controller.

[ole itcola Nal ate lta) &

(o)

@ Hold down the * (@) on the transmitter; (Pic 1) Pic 1

@ Press C Lele Rae ale UAC aaa) out 3 beeps; (Pic 2) Lalas CIN e ua Mrel ccd ore) eked ci e-ia\e lee am Na) i to any direction for 2 circles; (Pic 3) ) die) Claro e for 3 seconds, the transmitter send out 3 beeps again, it means that Transmitter fee lemm een eecem ae) alee ae

(et 10.2 Headless Mode

@ Slide the Headless Mode button to B" to enter the Headless Mode.

@ Slide the Headless Mode button to A to exit the Headless Mode. Please make sure the pilot to stay in the same orientation as the drone head faces when the drone taek off. Under Headless Mode, the forward direction is the direction that the head of drone faces when the drone take off. In order to make sure the pilot can tell drones direction, we recommend that pilots to stay in the same orientation as the drone head faces when the drone take off. If so, when the pilot pushes the direction joystick forward/ backward, the drone will fly forward/ backward toward him/ her. If the pilot move the right stick left/

right, the drone will move left/ right relative to the pilot.

-22-

QW. 10.3 Rreturn to Home(RTH) The Return to Home function brings the drone back to the last record-

ed Home Point. The Home Point is the location at which the drone takes off. Or during flight, the GPS receives more than 7 stars for the first time, the current position of the drone will be recorded as the Home Point. 10.3.1 Smart RTH Return to Home If the GPS signal is available (more than 7 satellites is presented) and the home point is recorded previously, press the Return to Home button on the transmitter, the drone will fly back to the home point. Exit the RTH mode by pressing the Return to Home button or push the Throttle Joystick

-23-

10.2 Headless Mode

(OR eT aa 16 MY ore oe Coan Mm Oa a ma aa (o-6 Sa e\e(o

@ Slide the Headless Mode button to A to exit the Headless Mode. HEAD ava a e a ena a a ee Rag as the drone head faces when the drone taek off. Under Headless Mode, the forward direction is the direction that the head of folrolal chica M alan ake Log Ral okelis In order to make sure the pilot can tell drones direction, we recommend that pilots to stay in the same orientation as the drone head faces when the drone take off. If so, when the pilot pushes the direction joystick forward/ backward, the drone will fly forward/ backward toward him/her. If the pilot move the right stick left/

right, the drone will move left/ right relative to the pilot. ye Aa SCOR Reig coed e al The Return to Home function brings the drone back to the last record-

ed Home Point. The Home Point is the location at which the drone takes off. Or during flight, the GPS receives more than 7 stars for the first time, the current position of the drone will be recorded as the Home Point. Return to Home If the GPS signal is available (more than 7 satellites is presented) and the home point is recorded previously, press the Return to Home button on the transmitter, the drone will fly back to the home point. Exit the RTH mode by pressing the Return to Home button or push the Throttle Joystick ke Gib 10.3.2 Low Voltage RTH

@ When the drones rear lights flash slowly, the * xi" symbol is displayed on the screen of the transmitter. At this moment, as long as the drone flying altitude is over 98 feet or the flying distance is over 492 feet, the first Low Voltage RTH will be triggered, and the drone will automatically return and hover 98 feet above the Home Point. At the same time, the drone will exit the Low Voltage RTH automatically. At this time, the pilot can re-control the drone within a range of 98 feet high and 328 feet.

@ When the drone's rear lights flash quickly, the * ex'_} symbol is displayed on the screen of the transmitter. At this moment, the transmitter sounds Di..., Di... At this moment, the second Low Voltage RTH will be triggered, as long as the drone flying altitude is over 49 feet or the flying distance is over 49 feet, the drone will automatically fly back to the Home Point.

-24-

10.3.3 Failsafe RTH If the GPS signal is available (At least 7 satellites) and the home point is recorded previously. Failsafe Return will be triggered if the transmitter signal is lost for more than 6 seconds. The drone will automatically start the return procedure and it will fly back to the last recorded Home Point. You can exit Failsafe RTH mode by press the Return to Home button or push the Left Joystick if the transmitter signal is recovered. 4 During the Failsafe Return procedure, the drone can not avoid obsta-

cles. The drone cannot Return-to-Home if the GPS signal is weak (satellites number is less than 7). If there is no GPS signal and transmitter signal lost for more than 6 seconds, the drone will not Return-to-Home but descend slowly until land to the ground and lock the drone.

-25-

10.3.2 Low Voltage RTH

@ When the drones rear lights flash slowly, the * *_P" symbol is displayed folaR ta eves AROMA RUC asl ( oerale al Manet) =i8 lee) Beale Rae (oa Ale]

EIU elem Re) cle oR (oem aa 9le Reh cela el Pao ao SON Voltage RTH will be triggered, and the drone will automatically return and hover 98 feet above the Home Point. At the same time, the drone will exit the Low Voltage RTH automatically. At this time, the pilot can re-control the drone within a range of 98 feet high Else Ack lane

@ When the drone's rear lights flash quickly, the * exiZ_}" symbol is displayed ColaN alee see-i-la elm (alo Mccle UNI Cs ova SUA ELATe AN o181 eR aoa Ce] BAN) Com 0) 146 a Di... At this moment, the second Low Voltage RTH will be triggered, as long as the drone flying altitude is over 49 feet or the flying distance is over 49 feet, the drone will automatically fly back to the Home Point. ye eA 10.3.3 Failsafe RTH If the GPS signal is available (At least 7 satellites) and the home point is recorded previously. Failsafe Return will be triggered if the transmitter signal is lost for more than 6 seconds. The drone will automatically start the return procedure and it will fly back to the last recorded Home Point. You can exit Failsafe RTH mode by press the Return to Home button or push the Left BoA, @1M (io (Caan Cm (6 8H] K eel ise r During the Failsafe Return procedure, the drone can not avoid obsta-

falsis The drone cannot Return-to-Home if the GPS signal is weak (satellites number is less than 7). If there is no GPS signal and transmitter signal lost for more than 6 seconds, the drone will not Return-to-Home but descend slowly until land to the ground and lock the drone. a GQ ibk 11.0 SPECIFICATIONS DRONE Model: HS700 Weight: 608 g Flight Time: 20 minutes Motor Model: 2204 1500KV Operating Temperature Range: 32 to 104F Dimensions: 220 x 220 x 155mm CAMERA Video Recording Modes: HD1920 1080p Photo: JPEG Video: AVI MAX Supported TF Cards: 32 GB (Not included) Operating Temperature Range: 32 to 104F TRANSMITTER Operating Frequency: 2.4GHz MAX Transmission Distance: 3280 feet Operating Temperature Range: 32 to 104F Battery: 4*1.5V AA batteries USB CHARGING CABLE Voltage: 5 V Rated Power: <10 W

~26-

Gp iBk DRONE BATTERY Capacity: 2800 mAh Voltage: 7.4 V Battery Type: Lipo Energy: 20.72 Wh Net Weight: <149g Charging power: 5~10W Charging Temperature Range: 41 to 104F (5 to 40C) Charging Time: 5~7 Hour 12.0 TROUBLE SHOOTING No. Problem Solution When the drone is powered on, the indicator light keeps flashing rapidly, The drone is in the gyroscope calibration state. Please place the drone on an flat and level surface. The drone cannot hover after Place the drone on a flat, level 2 takeoff and tilts to one side. surface and repeat the gyro calibra-

tion. Deformed propeller, replace the 3 The drone vibrated in flight. new propeller. The drone could not be | the drone battery voltage is too 4 | unlocked and the rear light flashed. low. Please fully charge the battery.

-27-

11.0 SPECIFICATIONS DRONE Model: HS700 Weight: 608 g

{alle alan Miaaloay0 Ran) [ale Cc) Motor Model: 2204 1500KV Operating Temperature Range: 32 to 104F Dimensions: 220 x 220 x 155mm CAMERA Video Recording Modes: HD1920* 1080p Photo: JPEG Video: AVI MAX Supported TF Cards: 32 GB (Not included) Operating Temperature Range: 32 to 104F aA ig Operating Frequency: 2.4GHz ay alicia saalsss[o)a BIS (=a oss 74s OR (cicit Operating Temperature Range: 32 to 104F Battery: 4*1.5V AA batteries USB CHARGING CABLE Avo) |t=[e [omen Rated Power: <10 W

-26-

A DRONE BATTERY Capacity: 2800 mAh Voltage: 7.4 V Battery Type: Lipo Energy: 20.72 Wh Net Weight <149g etn 1ce) [ale ocelot LOA Charging Temperature Range: 41 to 104F (5 to 40C)

(ence) iale tee am eles 12.0 TROUBLE SHOOTING No. lace) olclna) Solution When the drone is powered on, | The drone is in the gyroscope 1 _ | the indicator light keeps flashing | calibration state. Please place the rapidly, Center aN en RTC The drone cannot hover after | Place the drone on a fiat, level Pee eects surface and repeat the gyro calibra-

tion. Pre oncom Kelso ACC occas Mee Maken Nic conan rear emaeesel ee hole ee Re oe Roe eee RL eed ene reeteata tae fence

-27-

13.0 GENERAL INFORMATION FCC Notice:

This device complies with Part i 5 of the FCC Rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interfer-

ence that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harm-

ful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the structions, may cause harmful interfer ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

-28-

HOLY STONE WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to oper-

ate the equipment RF Exposure The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body,

-29-

9 oie HOW TO RECYCLE THIS PRODUCT This symbol on the product or i:s documentation indicates that it must not be disposed of with household waste. Uncontrolled waste disposal may harm the environment or human health, Please separate your device from other types of waste to recycle it responsi-

bly. This will help to foster the sustainable re-use of material resources, We invite you to contact your retailer or inquire at your local town hallto find out where and how the drone can be recycled. a5

-30-

HOLY STONE BATTERY WARNING:

|, Failure to follow all the instructions may result in serious injury, irreparable damage to the battery and may cause a fire, smoke or explosion. 2. Always check the battery's condition before charging o: using it. 3. Replace the battery if it has been dropped, or in case of odour, overheat-

ing, discolouration, deformation or leakage. 4. Never use anything other than the approval LiPo charger the battery, Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is recommended that you do not to use any other charger than the one provided with the product. 5.The battery temperature must never exceed 60C (140F} otherwise the battery could be damaged or ignite. 6. Never charger on a flammable surface, near flammable products or inside a vehicle (perferably place the battery in a non-flammable and nonconductive container). 7. Never leave the battery unattended during the charging process. Never disassemble or modify the housings wiring, or puncture the cells. Always ensure that the charger output voltage corresponds to the voltage of the battery. Do not short circuit the batteries. 8. Never expose the LiPo Dattery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60C(car in the sun, for example) 9. Always keep it out of reach of children. 10. Improper battery use may result in a fire, explosion or other hazard. 11, Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. 12. Different types of batteries or new and used batteries are not to be mixed,

=31-

Qi

(tS 13. Batteries are to be inserted with the correct polarity. 14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for any damage to their cord, plug, enclo-

sure and other parts and they must not be used until the damage has been repaired. 15.The packaging has to be kept since it contains important information. 16.The toy is only to be connected to Class Il equipment bearing the symbol. (a) EU RF Power|EIRP); 10dBm (2413MHz ~ 2461 MHz) Caution

|The max operating of the EUT is 45C. and shouldn't be lower than

-10C 2.The device complies with RF specifications when the device used at Omm form your body. 3.Declaration of Conformity. We, Xiamen Huoshiquan Import & Export CO., LTD hereby, declare that the essential requirements compliance with the Directive 2014/53/EU, the ROHS Directive 201 1/65/EU and Safety Directive 2009/48/EC have been fully fulfilled on our product with indication below:

Product Name: REMOTE CONTROL MODEL/RADIO CONTROLLED Model/Mark : HS700/HOLYSTONE

-32-

iia The Statement of compliance is available at the following address:

http://www. holystone.com/docs/HS700EUDOC.pdf This product can be used across EU member states. MANUFACTURER INFORMATION Manufactured by Xiamen Huoshiquan Import & Export CO., LTD. Room 703,No. 813-2 Xiahe Road, Siming District, XIAMEN, China

+1(855) 888-6699 ZOSceee @

Made in China changes or modifications not expressly approved by he party responsible for compliance could void the user's authority to operate the equipment. This equipment nas been tested and found to comply with the iis fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed o provide reasonable protecton against harmul Interference in a residential instalation. This equipment generates, uses and can radiate radio frequency energy and, i not installed and used in accordance wth the instructions, may cause hermful interference

'o radio communications. However, there is no guarantee that interference wil not occur ina particular installation this equipment does cause harmiulintererence to radio or television reception, which can be determined by tung the equipment off and on the user is encouraged to try to correct te interference by one or more ofthe folowing measures:

~Reotient or relocate the receiving antenna,

= Ineroase the separation between the equipment and receiver.

= Connect the equipment into an out on a ccultiferent from that to which the receive is connected.

~ Consult the dealer or an experienced raio/TV technician for help, This equipment complies with FCC radition exposure limits set forth fr an uncontlled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

-33-

ee]

RSMo Lecce CO OM anon (ce R/O nee ica oe) -1FINy2 14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for any damage to their cord, plug, enclo-

sure and other parts and they must not be used until the damage has been repaired. 15.The packaging has to be kept since it contains important information. 16.The toy is only to be connected to Class Il equipment bearing the symbol. Hi EU RF Power(EIRP}: 10dBm (2413MHz ~ 2461 MHz}

Caution

|.The max operating of the EUT is 45C. and shouldn't be lower than

-10C. 2.The device complies with RF specifications when the device used at Omm form your body. 3.Declaration of Conformity. Coe lan cian 0 (osil(|0 <a 0 nal ele ga <u (oe eG OmmID) Lalai(cl0\VAe|o(elra] CoM tgr=] Galo NS=181Uol Coe (CentER Gel) ae R tan aled Dyce PANES AO mgd ENS Pat PONE AOE oR 1CNY Directive 2009/48/EC have been fully fulfilled on our product with indication below:

Product Name: REMOTE CONTROL MODEL/RADIO CONTROLLED Model/Mark : HS700/HOLYSTONE

=e A yrosA RA Een

The Statement of compliance is available at the following address:

http://www. holystone.com/docs/HS700EUDOC.pdf This product can be used across EU member states. MANUFACTURER INFORMATION Manufactured by yCelancia um 0(eal(e]0 -1an an) le te a=, 00 aC Oma mB) Room 703,No. 813-2 Xiahe Road, Siming District, XIAMEN, China

+1(855) 888-6699 me y Yea [ee Made in China Don Se ee Ce This equipment has been tested and found to comply with the iis fora Class 8 digital device, pursuant Ce ee ee cee Dae ee ed Cee ee eet eee eed ee ee fo eee eee Cee ee eet ees Sener ete eee Dee Cee Pa) ee ee eaten ed Se Ce ne cn ean ad eee a aa ee eee ee cde eet ene es environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with Sea

-33-

FCCID: 2A 755HOLYSTOREMT This device complies with Fart 15 of the FOC Rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interFerence. that may cause undesired operation