UserInstructions IVFBU01 series is a portable dongle UHF Bluetooth reader developed by Xiamen Innov Information Technology Co.,Ltd, Support ISO 180006C/EPC Global GEN II protocol,whichcanbeconnectedtoIOSandAndroidviaBluetoothinterface,and also can be used to connect traditional computer PC through USB interface .The product is compact and easy to carry, also can be widely applied to various RFID applicationscenarios. Instruction:
1.Turnonthedeviceswitch:toggleswitchistoggledtothepositiononthehousing withthedotmark.Atthispoint,thecentralpowerofthedeviceislitgreen. 2.Browse www.xminnov.com download the Bluetooth UHF APP, search UHF Bluetoothreader,thedevicenameBDE_WEIXIN_TTM 3.ClickBDE_WEIXIN_TTMtoconnecttheUHFBluetoothreader,atthissametime theleftsideBluetoothflashgreenlight. 4.Setting:ClicktheSettingsbuttonintheupperleftcorneroftheapptosetthe frequencybandandpower. 5.Click the < button in the upper left corner of the APP to return the main interface.ClicktheStartCountingbuttonatthebottomrightofthemaininterface tostartcountingtheUHFtags. parameterspecification 1),ultrahighfrequency(UHF) 865868Mhz(EU),902928MHzUS 2),supportios,Androidplatform 3),thecommunicationinterface:bluetoothandmicrousb 4),readdistance:0.5m(dependingonthelabelsize) 5),workinghours:continuouswork4hours 6),material:ABS+PCengineeringplastic 7),batterycapacity:550mA 8),RFPowerlessthan30dbm 9),Wholedeviceconsumeslessthan2W FCCStatement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note Hereby,XiamenInnovInformationTechnologyCo.,Ltddeclaresthattheradio equipmenttype[designationoftypeofradioequipment]isincompliancewith Directive2014/53/EU. ThisdevicemaybeoperatedinallmemberstatesoftheEU. Donotexposeyourdevicetoextremetemperatureslowerthan10Candhigher than+45C. Caution Riskofexplosionifbatteryisreplacedbyanincorrecttype.Disposeofusedbatteries accordingtotheinstructions. Body-Support & Limb-worn Operation This device was tested for typical body support & Limb-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0 cm can be maintained between the users body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.