FCC ID: 2A2HA-AN581 Thermal Receipt Printer

Instruction Manual Thermal Receipt Printer AN581 series Version:1.0 Table of Content 1.Packing List ........................................................................... 1 2.Appearance and Components .............................................. 2 3.Instruction for Product Usage .............................................. 3 4.Preparation ............................................................................ 4 5.Bluetooth Connection .......................................................... 7 6.Papaer Installation ................................................................ 8 7.Printer Cleaning .................................................................... 10 8.Technical Specication ......................................................... 11 9.Warranty ................................................................................ 12 Preface This manual contains instructions for product usage and installation. Please read it carefully before using the product. WARNING:

Operation of this equipment in a residential environment may cause radio interference. NOTICE!

The printer cutter blade has sharp edage, please be careful to prevent accidental cuts. NOTICE!

After printing, please do not touch the overheated print head directly to prevent burns. 1. Packing List After unpacking the box, please check whether the appearance of the product is intact and count all accessories. If there is any defect,please contact the dealer!

Printer Power Adaptor Instruction Manual Instruction Manual Warranty card included USB Cable NOTE:

Due to continuous product improvement, the model specications, accessories and procedures described in the manual are based on the actual machine and are subject to change without prior notice.

-1-

2. Appearance and Components Cutter Blade Rubber Roll Cutter Cover Paper Bin USB Port Cashbox Port Power Port Paper Bin Cover Release Latch Power Button Advance Button Status Indicator Power Indicator NOTE: Fixed cutter only for models with cutter.

-2-

3. Instruction for Product Usage 3.1 Instructions for power switch operation Power on: In the o state, press and hold the power switch until the blue light ashes and the printer turns on. Power o: In the on state, press and hold the power switch until the blue light goes out and the printer shuts down. 3.2 Instructions for paper feed key operation Press the paper feed button once to feed the paper;

Press and hold the paper feed button to feed paper continuously. After reaching a certain length, paper will no longer be fed. 3.3 Introductions for indicator light status Indicator State Status Description Troubleshooting Bluetooth Indcator

(Blue) Status Indicator

(Green) Flashing Not Connected Connect Bluetooth Steady On Connected Three Flashes Five Flashes Paper Out Check if the paper is loaded correctly Print head overheated Wait for cooling down Six Flashes Printer Cover Opening Go Out Normal

-3-

Close the cover 4. Preparation 1. Connect the power supply (make sure the printer is turned o) Step 1: Plug one end of the power adapter into the printer's power interface, and connect the other end of the power cord to the socket;

Step 2: Plug one end of the USB data cable into the printer's USB interface, and connect the other end to the computer. Note:

Note: If you nd any errors or omissions in the information in this manual, please report it to us or your dealer, for which we are deeply grateful.

-4-

4. Preparation 2.Please go to the ocial website http://www.qrprt.com, select the driver to download under the technology and support page, save the compressed package locally and unzip it, double-click the driver and the following will appear. Tip, please follow the prompts to turn on the printer and connect the printer to the computer. 3.After the connection is completed, click "OK", then click "Install"

in the picture below. Wait for a while, and the driver installation is completed.

-5-

4. Preparation 4.Click "Advanced" in the printer's "Printing Preferences" page to select paper specications, such as shown below:

5.Click "Print Test Page" in the "Printer Properties" page of the printer. If it can be printed and positioned normally, the printer driver has been installed correctly.

-6-

5. Bluetooth Connection 1.For mobile phones of Android Step 1: Turn on the printer Step 2: Search device in Bluetooth interface, select the printerand connect. The original password is 0000 or 1234. When the Bluetooth pairing done. Step 3: Open the APP, link the printer and print. 2.For mobile phones of iOS Step 1: Turn on the printer and Bluetooth. Step 2: Open the APP, link the printer and print. NOTE 1.It supports the devices with Bluetooth. 2.Make sure Bluetooth is on when you process the connection. 3.IOS devices can use APP or mini program to connect without PIN code matching.

-7-

6. Papaer Installation 1.Facing the front of the machine, turn the cover opening knob upward to open the paper compartment cover. Release Latch 2.After opening the paper compartment cover, put the paper roll into the paper compartment (pay attention to the direction of the paper roll). Correct Wrong

-8-

6. Papaer Installation 3.After pulling out the paper roll for a while, press the paper bin cover down and close it.

-9-

7. Printer Cleaning Matters needing attention:

1) Turn o the power supply of the printer before cleaning. 2) The print head gets very hot when printing. Therefore, if you want to clean the print head, turn o the printer power and wait 2 to 3 minutes before starting. 3) When cleaning the print head, do not touch the heating part of the print head, so as not to damage the print head due to static electricity. 4) Be careful not to scratch or damage the print head. 7.1 Cleaning the Printer 1) Please open the top cover and use a Clean Pen (or a cotton swab dipped in diluted alcohol (alcohol or isopropyl alcohol) ) to clean the top cover from the middle of the print head to both sides. 2) After cleaning the print head, do not use the printer immediately. Wait until the clean alcohol used is completely volatilized (1 to 2 minutes) and the print head is completely dry before use. 7.2 Clean sensor, rubber roll and paper path 1) Please open the top cover of the printer and take out the paper roll. 2) Use a dry cotton cloth or cotton swab to wipe away dust or foreign matter. 3) Soak a cotton cloth or cotton swab in medical alcohol and use it to wipe away sticky foreign matter or other contaminants. 4) Do not use the printer immediately after cleaning the parts. Before using it, please wait for alcohol evaporating completely

(1 to 2 minutes) and the printer drying completely. NOTEClean parts when print quality or paper test performance deteriorates.

-10-

8. Technical Parameters Method Thermal Printing Speed 80mm/s(MAX) Paper width 58mm(MAX) Paper Thickness 0.06-0.1mm Supported Paper Thermal Paper Power adapter 9V/2.0A Printing life TPH 30km Connection USB (Bluetooth

/Cashbox interface RJ11 optional) Operating Environment Storage Environment Temperature: 5-40 Humidity: 20-90%

Temperature: -25-55 Humidity: 20-93%

Dimension 110*146*109mm

-11-

FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:

(1) this device may not cause harmful interference, and

(2) this device must acceptany interference received, including interference that may cause undesired operation.Any changes or modications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Find out more product knowledge and after-sales service Xiamen IPRT Technology Co., Ltd. Index: www.ayinprinter.com Driver: help.ayinprinter.com E-mail: support@iprt.com.cn

Xiamen iprt Technology Co., Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name:Xiamen iprt Technology Co., Ltd Address:3rd, 4th and 5th floor, No. 101, Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China Product Name:Thermal Receipt Printer FCC ID:2A2HA-AN581 Model(s):AN581, IP-256U, POS58, POS58BT, IP-256BU, AN581-U, AN581-P, AN581-BT, AN581-W, AN581-C, AN58I, AN58I-U, AN58I-P, AN58I-BT, AN58I-C, AN58I-W, QR-58, QR-58U, QR-58C, QR-58E, QR-58G, IP-58W, QR-58P, QR-58W, QR-58BT 2.911(d)(5)(i) Equipment Type We, Xiamen iprt Technology Co., Ltd (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:Mike XU Date: 2023.10.27 Title and Company name:N/A/Xiamen iprt Technology Co., Ltd NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Xiamen iprt Technology Co., Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name:Xiamen iprt Technology Co., Ltd Address:3rd, 4th and 5th floor, No. 101, Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China Product Name:Thermal Receipt Printer FCC ID:2A2HA-AN581 Model(s):AN581, IP-256U, POS58, POS58BT, IP-256BU, AN581-U, AN581-P, AN581-BT, AN581-W, AN581-C, AN58I, AN58I-U, AN58I-P, AN58I-BT, AN58I-C, AN58I-W, QR-58, QR-58U, QR-58C, QR-58E, QR-58G, IP-58W, QR-58P, QR-58W, QR-58BT 2.911(d)(5)(ii) Applicant filing We, Xiamen iprt Technology Co., Ltd (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Mike XU Date: 2023.10.27 Title and Company name:N/A/Xiamen iprt Technology Co., Ltd NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Xiamen iprt Technology Co., Ltd Section 2.911(d)(7) USA Agent for Service of Process Company name:Xiamen iprt Technology Co., Ltd Address:3rd, 4th and 5th floor, No. 101, Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China Product Name:Thermal Receipt Printer FCC ID:2A2HA-AN581 Model(s):AN581, IP-256U, POS58, POS58BT, IP-256BU, AN581-U, AN581-P, AN581-BT, AN581-W, AN581-C, AN58I, AN58I-U, AN58I-P, AN58I-BT, AN58I-C, AN58I-W, QR-58, QR-58U, QR-58C, QR-58E, QR-58G, IP-58W, QR-58P, QR-58W, QR-58BT 2.911(d)(7) USA Designated Agent for Service of Process We, Xiamen iprt Technology Co., Ltd (the applicant) designate [Stone Trading Limited] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. the designated agent and acknowledge our address and email address of acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd

#2266, Colorado Springs, CO 80918, United States FRN Number: 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email: compliance@c-shlink.com Applicant Company name:Xiamen iprt Technology Co., Ltd Address:3rd, 4th and 5th floor, No. 101, Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China Grantee FRN Number0031094600 FCC Grantee Code:2A2HA Contact Name:Mike XU Telephone No:18020107591 Email:xusq@iprt.com.cn 2.911 (d)(7)USA Agent v1.4 Signature:

Title: Manager Date: 2023.09.12 Xiamen iprt Technology Co., Ltd Signature:

Title: N/A Date: 2023.10.27 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4

Xiamen iprt Technology Co., Ltd Agent Authorization Company:Xiamen iprt Technology Co., Ltd Address:3rd, 4th and 5th floor, No. 101, Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China Product Name:Thermal Receipt Printer Model Number(s):AN581, IP-256U, POS58, POS58BT, IP-256BU, AN581-U, AN581-P, AN581-BT, AN581-W, AN581-C, AN58I, AN58I-U, AN58I-P, AN58I-BT, AN58I-C, AN58I-W, QR-58, QR-58U, QR-58C, QR-58E, QR-58G, IP-58W, QR-58P, QR-58W, QR-58BT Product Description:Thermal Receipt Printer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Mike XU Title:

N/A Company: Xiamen iprt Technology Co., Ltd Date: 2023.10.27

Xiamen iprt Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A2HA-AN581 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2023.10.27 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Mike XU Title:N/A

Xiamen iprt Technology Co., Ltd Model Difference Product description: Thermal Receipt Printer Model name: AN581 IP-256U, POS58, POS58BT, IP-256BU, AN581-U, AN581-P, AN581-BT, AN581-

W, AN581-C, AN58I, AN58I-U, AN58I-P, AN58I-BT, AN58I-C, AN58I-W, QR-58, QR-58U, QR-58C, QR-58E, QR-58G, IP-58W, QR-58P, QR-58W, QR-58BT Trade Name:

All the model are the same circuit and RF module, only the sales area is different. Regards Sincerely Clients signature:

Clients name / title : Mike XU/N/A Contact information / address: 18020107591/3rd, 4th and 5th floor, No. 101. Huli Industrial Park, Meixi Road, Tong'an District Xiamen, China