User Manual ManufacturerCampvalley Global Ltd.,Unit-1 Product model2ARCG8PB Instruction use for Bluetooth Speaker Pair name OT-Tent Speaker 1. 2. Switch on the button on the speaker at the tent ceiling. The Bluetooth speaker will play one Install 4D batteries with correct polarity into the battery compartment sound(likes ding-dong ) as it starts to work. And the blue light is on and flash quickly. 3. Locate the pair nameOT-Tent Speaker , using your smart cellphone.
(Note: The Bluetooth speaker support Bluetooth 5.0 and above.) 4. Once they pair correctly, the blue light lights as normal, you will listen a sound(likes ding-ding-dong-dong-dong-dong-- ) again. 5. While playing music using your cellphone, the blue light flash slowly. 6. While music is stopped using your cellphone, the blue light lights. 7. Switch off the button on the speaker at the tent ceiling, the blue light is off. The light signs:
Speaker onlight on and flash quickly Once pairedlights as normal Playing musiclight flash slowly Stop playing muciclights as normal Speaker offlight off Electrical parameters Bluetooth5.0 Modulation TypeGFSK; 8DPSK;/4DQPSK;
Work temperature-40C to +80C Voltage Rang6V FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
connected. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help.