L8 Users manual
(Door station Model No.16) 1. Door stations 2. Technical specification Camera:
Viewing angle:
Lens:
Resolution:
Min. Illumination:
Video Output:
Audio SNR:
Audio Distortion PIN Code:
System Capacity:
Card and capacity:
Standby Current:
Working Current:
Power supply:
Environment Temperature:
3. Structure P-P 1/3" CCD 92 F=3.6 420TV Lines 0.01 Lux 1V /75 25dB 7%
1~6 bits Max. 9999 apartments/building 50,000pcs; ID card(Format:EM, 125Kh); IC card (Format:
mifare 1 S50/S70, mifare Ultra Light, mifare Light, 13.56MHz) 160mA 410mA DC12V (for audio); DC32V (for video)
-40~+45 2 4 5 1 2 3 4 5 6 7 8 9 10 11 LED Camera Light sensor Screen Keypad Guard button Up arrow button Down arrow button Key button Card reader Microphone 1 3 6 7 8 9 10 11 1 4. Installation a. Produce a rectangle groove according to the installation size (360x147x60mm) on a suitable position(). b. Put the box in the groove and fix it with expansion tubes and screws(). c. After the connection, put the door panel in the box and fix it with screws from two ends as the figure(). Box j Door panel Wall 5. Operation 5.1 Call indoor phones Push a room number on the door station. 1001 5.2 Call the guard unit (if there is) Push the guard button as the following figure. 5.3 Release door with registered card Move the registered card over the card reader as the following figure. 5.4 Release door with password Push the room number and the password as the following figure. 1001 1234 2 6. 2nd-confirm door station list Product p hotos Model names Series m odel numbers Sizes: L x W x D (mm) Exclusive features Model No.16 JB-5000 L8-5002MGLCQT-IP(8)-16 JB-5000 L8-5002MLCQT-IP(8)-16 38616652 Model No.16N JB-5000 L8-5002MGLCQT-IP(8)-16N JB-5000 L8-5002MLCQT-IP(8)-16N 38616652 Model No.10 JB-5000 L8-5002MGLCQE-IP(8)-10 JB-5000 L8-5002MLCQE-IP(8)-10 17038654 XIMAN LEELEN TECHNOLOGY CO.,LTD. 65, SUNBAN SOUTH ROAD, JIMEI, XIAMEN, 361021 CHINA This appliance shall not be disposed together with the normal waste. It must be recycled. Atitude during operation below 2km. 3 FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.