BARCODE SCANNER BARCODE SCANNER User Manual Customer Service:
server@nadamoo.cn nadamoo@126.com V2. In order to correctly use the bar code scanner, please read the instruction carefully and do not arbitrarily scan the setting codes, otherwise some settings may not be available temporarily. Please note that this scanner is a laser bar code scanner, it can not scan barcode on screen. All the bar code on the digital manual should be printed to scan!
Please keep this instruction for reference in the future. If you have any question or concern about the operation of the scanner, please contact us at one of the following email address:
server@nadamoo.cn nadamoo@126.com You should write down the model & the specic scenario and consult us , when you find the scanner is abnormal. 1 Contents Technical Parameter Packing list Battery & Charging Quick Start Guide device 1. 2.4G Wireless connection 2. Wired connection FAQs Troubleshooting Optional Function settings 1. Switch connection mode 2. 2.4GHz wireless mode pairing setting 3. Upload mode setting 4. Voice setting 5. Scanning mode setting 6. Battery remaining 7. Interface setting 8. Indentify barcode type 9. Keyboard language setting Case sensitivity setting Power off setting Restore factory setting End character setting Barcode setting Insert and delete character 10. 11. 12. 13. 14. 15. 2
........................................................ ....................................................... .... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... ....................................................... 3 4 4 5 5 8 9 9 12 14 14 16 19 22 23 23 24 25 26 28 28 29 29 30 35 Technical Parameter Mfr P/N Connection technology Max Transmission Range Memory Battery capacity Charging power Light source LED life Button life Resolution Scanning width CPU Bit Error rate Printing Contract Decoding speed Scanning angle Drop test Certificate Depth of Field 2.4 GHz Radio Wireless+Wired 100m in 2.4 GHz wireless mode 100000 barcodes 1400mAh DC 5V 500mA 65020nm VLD 12000 hours 8000,000 times 3mil 30cm ARM 32-bit Cortex 1/20million
>25%
300 times/sec rotor angel30inclination 45declination 60 2.0m CEFCCRoHS IP54 3mil 2mm-100mm 10mil 15mil 30mil 2mm-350mm 5mm-500mm 10mm-800mm Applicable 1D barcode UPC/EANCode128Code39Code 39Full ASCIICoda barindustrial /Interleaved 2 of 5, Code93MSICode11 ISBNISSNetc. 3 Packinglist Barcode scanner*1 USB Cable*1 Instruction Manual*1 USB Wireless Receiver*1 Battery&Charging The scanner is powered by 1400mAh rechargeable battery. Please charge the scanner at least 30 minutes before use to ensure that the scanner has enough power. Insert one end of USB cable into the bottom of scanner, and insert another end to computer USB interface or 5V DC USB interface adapter. Charging indicator The red indicator light on the top of the scanner will slightly strobe during charging. The red light will go off when the scanner is fully charged. NOTE:
1. Please use computer USB interface or 5V DC power adapter for charging, the abnormal power adapter will cause permanent damage to scanner and battery. 2. When the top red indicator light cyclically flashes three times, it means the battery is at low power. Please stop using and recharge it. 4 QuickStartGuide When the USB cable is inserted in, the scanner will automatically switch to wired mode. Connection mode indication:
When the light on the top of the scanner turns green, it indicates the scanner is in 2.4 GHz wireless mode. It is suggested to use 2.4GHz wireless mode/ wired mode on the computer 5 2. 2.4GHz wireless mode quick start guide
--To use the scanner on computer STEP1. Scan the following code 2.4GHz Wireless Mode to 2.4Ghz wireless mode. When the light on the top of the scanner turns green, it means the scanner successfully changes mode to 2.4GHz Wireless Mode. 2.4GHz wireless mode STEP2. Plug the USB receiver in to USB port of your computer, within 30 seconds, scan the code match to pair the scanner with the USB receiver. Match Note30 seconds after the USB receiver is plugged, the scanner cannot match the USB receiver. If the pairing fails the scanner will emits sound like di en. Please unplug the USB receiver and plug it again, then scan the code "match "
STEP3. Scan the code instant upload mode to set the scanner to instantly upload the barcode Instant upload mode STEP4. Test the scanner using notepad , put the cursor in the blank and then scan a barcode to see if the barcode comes up. 8 3.Wired mode quick start guide STEP1. Connect the scanner to your computer via USB cable. When the USB cable is inserted in, the scanner will automatically switch to the wired mode by default. STEP2. Open notepad on computer, move cursor to the blank, scan a barcode to see if it can be uploaded. NOTE :
In the case where the current mode is the scanner will automatically switch to wired mode the light of the scanner is stay blue. modeif the USB cable is inserted in 2.4G In the case where the current mode is 2.4G Wireless mode if the USB cable is inserted in the scanner will automatically switch to wired mode the light of the scanner is stay green. FAQs:
Q1. If i scan a product barcode, will it include the name of the product in the file automatically?
Answer The scanner works like a keyboard. The scanner does not interpret what the bar code is, it just "types" out a string of alphabet numeric characters that the bar code represents. it's up to the database software you are using to interpret what that string of characters means. Once you acquire the barcodes, you have to correlate them to something more meaningful by either purchasing a software service that will interpret the barcode and relate it to a product, or you can use your own internal inventory system to assign the barcodes to specific products. After creating the relationship between your barcode and the corresponded information ,when you enter the barcode into the software by the scanner,your software will look up the barcode and then output the related information of your product. Q2. Why all barcode can not be read?
9 Answer After resetting the scanner into factory settings, the scanner was set to by default. 2.4G mode If you want to use it in 2.4G wireless mode, please connect the scanner to you computer via USB receiver, and then scan the following codes "2.4GHz Wireless mode"
"Match"
"instant upload mode". There may be some other reasons for this issue. Please troubleshoot the product according to the troubleshooting instruction on page 12. Q3. Some barcodes can not be read, why?
Answer Incomplete and unclear barcodes might not be read. A. B. It is possible that the setting is off by default for some barcode types which are not commonly used. You need activate a specific barcode type to get it working. Please feel free to contact our Customer Service Team for further assistance if you don't know the exact type of barcode that you are referring to Q4. Why does scanner not read the barcode exactly. When I use the scanner to read a barcode of an item, I get a different result from the barcode itself. Example 1, There are two separate barcodes together. It scanned the first 12 digits in the barcode but not the last five. Solution Please scan the code UPC/EAN extra code-Enable on page 32. Example 2, The original barcode is abc12345 the scanning result is
+A+B+C+D12348the scanner put + between character. SolutionPlease scan the code Code39 FullASCII-Enable on page 32. If that is not your case, please send us a clear picture of the barcode and the result you 10 get, our customer service will help you to solve the problem. Q5. Is there any barcodes to remove auto-enter after every scanning?
Answer:
To remove the auto-enter, please read the code disable suffix on page 29. Q6. Why does scanner not read the first digit of UPCE barcode. Answer:
To enable the scanner to read the first digit of UPCE, system digiton page 31. read the code Show UPCE Q7. How to add TAB?
Answer:
To add TAB, read the code TAB on page 29. 11 Troubleshooting(2.4GhzwirelessMode) Problem Possible Reason Solution Insert the USB receiver into the PCs USB port, the receivers light does not light up. Power on the scanner, the scanner has no reaction. the buzzer does not beep, the green light on the top of scanner does not turn on, the red scanning laser does not show up. The scanner can not hold the charge. Power on the scanner, the buzzer beeps, the green light on the top of scanner will be on, the red scanning laser does not show up or become a dot. Scanner and USB receiver are all in good condition. But the barcode can not be sent to my computer. The PCs USB port is damaged. Connect the USB receiver to another USB port. The USB receiver is damaged. Contact us for the replacement. The battery run out. Recharge the scanner. The PCs USB port isdamaged. The USB cable is damaged. Using another USB port for charging. Contact us for the replacement. The laser head is damaged. Contact us for the replacement. Unplug the receiver and plug it in to PCs USB port and scan the following codes:
2.4GHz wireless mode match instantly upload mode The scanner failed to match the USB receiver .. The scanner was set to storage modescanned data will be kept in the buer of scanner. 13 OptionalFunctionSettings Settings of the barcode scanner can be changed by scanning the setup barcodes included in this manual. 1. Switch Connection Mode There are 2 operations to switch the mode. 1) Scan desired code to select the mode. 2.4GHz wireless mode 2) Press and hold the button for 10 seconds to change the mode Connection mode indication:
When the light on the top of the scanner turns green, it indicates the scanner is in 2.4 GHz wireless mode. 14 3. 2.4GHz Wireless Mode Pairing Setting In 2.4GHz wireless mode, two kinds of pairing modes are supported. 3.1 One scanner to one receiverOne scanner only sends barcode to one receiver. Pairing operation:
Plug the USB receiver into your computer , scan the code "match " to pair the scanner with the USB receiver Match Pairing indication:
1If the pairing succeeds, the buzzer beeps "DI-en""di di di"
2If the pairing faileds, the buzzer beeps "DI---en"
NOTE30 seconds after the USB receiver is inserted, the scanner cannot match the USB receiver. scan the code "match". If the pairing failed, please unplug the USB receiver and plug it again, then 16 Several units can work independently with different computers in the same area. They won't interface with each other during work. If you want to use them on multiple computers, each with own scanner and receiver. Please follow the setps 1Plug the USB receiver A into PC A. 2Scan the code matchusing scanner A to pair the scanner A with the receiver A. 3 30 seconds after the USB receiver A is plugged (or unplug the receiver A), plug the USB receiver B into PC B USB port 4Scan the code matchusing scanner B to pair the scanner B with the receiver B. ..... Match 17 3.2. Max.32 Scanner - to - One receiver Multiple scanners send barcode to one USB receiver. One USB receiver can connect to 32 scanners at most. Pairing operation:
1Plug the USB receiver A into PCs USB port 2Scan the code matchusing scanner A to pair the scanner A with the receiver A 3Unplug the USB receiver A and plug it to PCs USB port again 4Scan the code matchusing scanner B to pair the scanner B with the receiver A
... Match 18 4. Upload Mode Setting Two kinds of upload modes are supported in 2.4GHz wirelelss mode. 4.1. Instant Upload Mode Read barcodes and upload it straight to the file you have opened.
** To set the scanner to upload barcode instantly, scan the following code:
Instant upload mode Scanning indication:
(1) The blue/green indicator light flashes once and the buzzer beeps once when the barcode is uploaded successfully.
(2)The red indicator light flashes once and the buzzer emits sounds like slow "DI---en"
when the barcode can not be uploaded. Note:
The transmission speed between every character can be changed by scanining the following code. If some characters are missing, please set the scanner to lower transmission speed. The higher the value, the slower the speed is. Speed 00 * wireless default Speed 05 Speed 10 Speed 20 Speed 15 19 Speed 40 Speed 60 Speed 50 4.2. Storage mode Read barcodes and store the barcodes in scanner s own memory. You can upload the data to computer in batchs when you need them. Internal storage saves up to 100,000 barcodes. Note In storage mode, the barcode will be stored in the scanner and will not come up on your computer instantly. The barcode comes up on your computer only when you scan the settings code "upload data"
** To convert scanner from "instant upload mode" to "storage mode", please scan the following barcode Storage mode. Storage mode
** Put the cursor in the blank, scan Upload Data barcode to upload data from memory . (for storage mode only) Upload data
** Put the cursor in the blank, scanShow total storagebarcode to show total number of stored barcode. (for storage mode only) 20 Show total storage
** Scan the barcodeZero clearingto clear all stored barcode. (for storage mode only). Zero clearing Scanning indication:
(1) The blue/green indicator light flashes once and the buzzer rang a fast "DI-en" when the barcode is saved successfully in the built-in memory of the scanner
(2) The red indicator light flashes once and the buzzer rang a slow "DI---en" when the barcode can not be saved in the built-in memory of the scanner, because the space of memory is not enough and cannot store any more barcodes. Please upload the saved barcode by scanning the code "Upload Data" and then clear the saved barcode by scanning code "zero clearing". Note1:
In storage mode, the transmission speed between every barcode can be changed by scanining the following code. The higher the value, the slower the speed is. Note2 If the character upload speedon page 19 is set to a slower speedand the barcode upload speed is set to a higher speed. When uploading data in storage mode, the data maybe be lost. If some character or barcode are missing, please set the scanner to lower barcode transmission speed. Speed 000* wireless default Speed 005 21 Speed 040 Speed 050 Speed 060 5. Beep Setting
** Select desired decoding beep mode Low volume Medium volume High volume (default Beep-Off
** Select desired start-up beep mode High volume (default Medium volume Low volume Beep-Off 22 6. Scanning Mode Setting 2.4GHz wirelelss mode. 6.1. Manual trigger mode (default) :
User press the trigger, the scanner will emit a red light to read the barcode. When user release the tigger, the red light will go off.
** Scan the following codes to set the scanner to Manual trigger mode . Manual trigger mode (default) 6.2. Continuous scanning mode Theres no need to click the trigger in this mode. The red light of the scanner will be on all the time.
** Scan the following codes to set the scanner to Continuous Scanning Mode. Continuous Scanning Mode 7. Battery Remaining Put the cursor in the field, scan the following barcode, the battery remaining tip DumpEnergy: xxx%will comes up in the location of cursor Battery Reserve 23 8. Interface Setting Two kind of Interface are supported. 8.1. USB-HID mode In the HID protocol, there are 2 entities: the "host" and the "device". The host communicates with the device and receives input data from the device on actions performed by the human. The most common example of a "host"
The "device" is the entity that directly interacts with a human, such as a keyboard or mouse. is a PC.
** To set the scanner as a keyboard to enter the barcode , please read the following code USB_HID(default) USB_HID (default) 8.2. USB virtual COM mode In USB virtual COM mode, when you pull the trigger, the barcode wont come up on universal software like notepad, excel, word etc. The scanner needs to work with driver and serial software, please contact us if you need to set it to USB virtual COM modewe will send you the driver and tutorial. 24 9. Identity Barcode Type This setting is to identify what type of the barcode is, follow the below steps to confirm:
Situation 1: Scan the code "Add ID front-on" below, then scan your goal barcode, there will be a character BEFORE the barcode you scanned, and this character states your Barcode Type. After that, if you don't need this prefix any more, please scan the code
"Add ID front-Off (default)" to hide it. Add ID front - ON Add ID front-Off Scan Goal Barcode Barcode type ID CODE 93 CODABAR UPC-A UPC-E ISBN CODE 39 h k b c f a Barcode type MSI/PLESSEY EAN-8 EAN-13 INTERLEAVED 2/5 CODE 11 CODE 128 ID f d e i m g 25 10. Keyboard Language Setting The scanner support 25 international keyboards:
You are suggested to set the keyboard type of the scanner to be in agreement with that in real use by scanning the correspondent barcode listed below. UNITED STATES default FRENCH SERBIA/YUGOSLAVIA BELGIUM GERMANY BRAZIL SPAIN ITALY SLOVENIA HUNGARY CANADIAN-FRENCH SWEDEN CROATIA LATIN AMERICA 26 SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) NETHERLANDS SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY UNITED KINGDOM DENMARK POLAND UNIVERSAL FINLAND PORTUGAL 27 11. Case Sensitivity Setting The scanner can change all the letter cases of barcode into uppercase or lowercase. Letter case of barcodes can be altered through scanning correspondent bar code below. All Capital All lowercase Swap Capital/ lowercase Cancel capital/lowercase settings 12. Power Off Setting The scanner will be powered off if there is no operation on it in 2 mins by default. Short press on the trigger can wake it up. Scan one of the following barcode to set the time interval,when it's idle exceeding the time interval you set,the scanner will be power off. 10s Automatic power off 50s Automatic power off 5mins Automatic power off 30mins Automatic power off Power off Never power off 28 13. Restore factory setting To set the scanner to factory settings, please scan the code:
Restore factory setting 14. End character setting By defaultthe scanner is sending a 'carriage return' after scanning a code (the same as pressing the 'enter' key) . CR/ENTER (default Disable suffix Tab To add Enter Key, please read code CR/ENTER(default To disable Carriage Return,please read code Disable suffix To add TAB, please read code TAB To disable TAB, please read thes code Disable suffix Note: if you need other Terminator, please contact us. 29 15. Barcode Setting The code ending with word "*"
is the default settings. UPCA:
UPCA-Enable*
UPCA-Disable Show UPCA check digit*
Hide UPCA check digit Show UPCA system digit*
Hide UPCA system digit UPCA to EAN13-Enable UPCA to EAN13-Disable*
UPCE UPCE-Enable*
UPCE- Disable 30 Show UPCE check digit*
Hide UPCE check digit Show UPCE system digit Hide UPCE system digit*
UPCE to UPCA-Enable UPCE to UPCA-Disable*
EAN13 EAN13-Enable*
EAN13-Disable Show EAN13 check digit*
Hide EAN13 check digit EAN13 to ISBN-Enable EAN13 to ISBN - Disable*
EAN13 to ISSN - Enable EAN13 to ISSN - Disable*
31 EAN8 EAN8 - Enable*
EAN8-Disable Show EAN8 check digit*
Hide EAN8 check digit UPC/EAN Extra code UPC/EAN extra code-Enable UPC/EAN extra code-Disable*
Code39 Code39-Enable*
Code39-Disable Code39 FullASCII-Enable Code39FullSCII-Disable*
Show Code39 start/stop digit Hide Code39 start/stop digit*
32 Code32 Code32- Enable Code32-Disable*
Code128 Code128-Enable*
Code128-Disable Code93 Code93-Enable*
Code93-Disable Code11 Code11-Enable*
Code11-Disabel CODABAR CODABAR-Enable*
CODABAR-Disable 33 Show CODABAR start/stop digit Hide CODABAR start/stop digit Industrial 2 of 5 Industrial 2 of 5 -Enable*
Industrial 2 of 5 -Disable Interleaved 2 of 5 Interleaved 2 of 5 -Enable*
Interleaved 2 of 5 -Disable MSI MSI-Enable MSI-Disable 34 16. Insert and delete character The barcode scanners permit special characters to be added at the beginning (prefix) or end (suffix) of the scanned barcode. The character also can be deleted. First step Scan one of the following setup code to choose the event. Insert character Delete character Second stepScan one of the following setup code to choose the barcode type. All barcode type UPCA EAN13 Code39 Code93 UPCE EAN8 ISBN/ISSN Code128 Codabar 35 Interleaved 2 of 5 Industrial 2 of 5 MSI China post GD1L Code32 Code11 GS1D GS1E Noteif you do not choose the barcode type, the setting will take effect for all barcode type by default. Third step : Scan one of the following setup code to choose the data group. Group 1 Group 3 Group 2 Group 4 36 Group 5 Group 7 Group 6 Group 8 Note 1 if you do not choose the data group, the scanner will take Data group 1 as default setting. Note2:
Thedatagroupisusedtodistinguishbetweendifferentsettingevents. itworkonthefollowingcircumstances:
1).Differentiatingthesettingfordifferentbarcodetypes 2).Distinguishadd/deleteprefixorsuffix Differenteventscantakeeffectatthesametime. Example1:
IfyouwanttoputAbeforetheCode39typebarcode, put"B"beforetheCode128 typebarcode. Thesettingstepsis Insertcharater>Code39>Datagroup1>Beforebarcode>065A>Savingsettings Insertcharater>Code128>Datagroup2>Beforebarcode>066B>Savingsettings Afterthat, whenthescannerreadaCode39 barcode,itwilladdAbeforethebarcode.When itreadaCode128barcode,itwilladdBbeforethebarcode. whenitreadothertypebarcode,likeUPC,itwillnotaddanycharacter. Example2:
37 Ifyouwanttoput"A"beforebarcode,put"B"afterbarcode. Thesettingstepsis Insertcharater>Allbarcodetype>Datagroup1>Beforebarcode>065A>Saving settings Insertcharater>Allbarcodetype>Datagroup2>Afterbarcode>066B>Saving settings Afterthat, whenthescannerreadbarcode123456789,thebarcodereceivedbythecomputerwill beA123456789B. Fourth steps Scan one of the following setup code to choose the position Before barcode After barcode Fifth steps Choose the character you want to add or the digit you want to delete. Character table please refer to ASCIl code table on page 35. Note 1 Ten characters can be added or deleted at most. Note 2 For the character deleting event, below is the corresponding deleting characters table. 001 SOH 002 STX 003 ETX One character Two characters Three characters 38 004 EOT 005 ENQ 006 ACK 007 BEL Four characters Five characters Six characters Seven characters 008 Back Space Eight characters 009 HT/TAB Nine characters 010 LF Ten characters Sixth steps Scan the below code to save the setting Save setting To remove the insert settingscan the following code in order Insert character Clear setting To remove the insert settingscan the following code in order Delete character Clear setting 39 40 41 42 43 44 45 FCCSTATEMENT Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.