1. Packing List 2.Hardware Introduction 3. Button Patterns PoE Version
Function Action LED Indicator Powered by PoE Switch VS133-P is powered by 802.3 at standard PoE. Choose one of the following methods to power up the device:
AI ToF People Counting Sensor 1 VS133 Device Multi-Interface RGB LED Indicator Reset Button Turn ON/OFF Wi-Fi
(LoRaWAN Version Only) Press and hold the button for more than 3 seconds. Enable/Disable: Blue light blinks for 3 seconds Wi-Fi ON: Blue light blinks constantly Wi-Fi OFF: Green light blinks constantly ToF Sensor Reset to Factory Default Press and hold the button for more than 10 seconds. Green light blinks until the reset process is completed Ethernet Interface (PoE) 4. Power Supply PoE Switch 4 Ceiling Mounting Kits 1 Multi-Interface
(PoE Version Only) 1 Quick Start Guide
LoRaWAN Version VS133-868M/915M/470M is powered by adapter (12VDC, 2A). Ethernet Cable
8 Staff Tags 1 Warranty Card 1 Power Adapter
(LoRaWAN Version Only) RGB LED Indicator Reset Button/Wi-Fi Button ToF Sensor DC Interface Power Adapter Power Adapter PoE Injector Ethernet Cable Switch VS133 5. Installation
1.Ensure the thickness of ceiling is more than 30mm, then attach the mounting sticker to the ceiling and drill 4 holes with a diameter of 6mm. If the wire needs to be extended to the interior of the ceiling, a wire hole with suitable size is required to be drilled. 2.Fix the wall plugs into the ceiling holes. 3.Remove the cover on the device, and then connect all required wires and pass them through the wire hole on the device. Or break the block on the side of the device, if the wires need to protrude from the side of the device.(Note: if you will use the Alarm I/O port of VS133-P, please connect the Multi-interface to the device). Cloud App Quick Start Guide All oftware & files can be downloaded from https://www.milesight-iot.com/documents-download/
Milesight IoT Co., Ltd. www.milesight.com Building C09, Software Park Phase III, Xiamen 361024, Fujian, China 4.Fix the device to the wall plugs via mounting screws. 5.Take the cover back to device. Recommended Height The maximum installation height should be 3.5m. Monitored areas for people counting at different heights:
2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 5.75 4.20 1.84 1.34 5.98 4.36 2.07 1.51 6.21 4.53 2.30 1.68 6.44 4.70 2.53 1.85 6.67 4.87 2.76 2.01 6.90 5.03 2.99 2.18 7.13 5.20 3.22 2.35 7.36 5.37 3.45 2.52 7.59 5.54 3.68 2.69 7.82 5.71 3.91 2.85 8.05 5.87 4.14 3.02
6. Access from Web Browser
connection or Ethernet port. Users need to set the password when using the device for
7. FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and.
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.