DS7610 Quick Start Guide All oftware & files can be downloaded from https://www.milesight-iot.com/documents-download/
Milesight IoT Co., Ltd. www.milesight-iot.com IoT DISPLAY Table of Contents 1. Package Contents........................... 2. Hardware Overview......... 3. Installation Instructions..........................................
4. Power Supply .....................................................
5. Declaration of Conformity........................................................ 6. FCC Statement............................................................................................
www.milesight-iot.com 1311 1. Package Contents 2. Hardware Overview Make sure all of the following items are included in the product package. 1 x DS7610 Device 1 Wall Mount Bracket 4 Wall Mount Screw Kits 4 VESA Mount Screws 2 Adhesive Tapes 1 Adhesive Tape Instruction 1 x Quick Start Guide 1 Warranty Card 1 PoE Injector
(Optional)
No. Description No. Description
Touch screen Front LED light strip Light sensor & distance sensor NFC area Back LED light strip
Wall mount hole VESA 75*75mm Type-C port DC power jack Ethernet port (PoE) Note 1 2 12 www.milesight-iot.com www.milesight-iot.com 13 13 3. Installation Instructions Wall mounting 1 m m 7 6 135mm 2 6*30mm wall plug Glass mounting 1 2 Use a 6mm diameter drill bit to drill four holes to a depth of 30mm at the desired height on the wall. Hammer the wall plugs into the holes respectively. Attach the tape on the back of the Wall Mount Bracket, and attach the bracket at the desired height on the glass with the TOP logo side facing up. Plug an Ethernet cable into the
3 4 3 4 Press the bracket on the wall with the TOP logo side facing up and align its holes with the wall plugs, then fix the screws into the wall plugs. Plug an Ethernet cable into the
Mount the IoT Display on the Wall Mount Bracket.
"# tightening the 2 screws at the bottom of the bracket. 5
6 VESA desktop stand mounting 1 2
! Mount Bracket.
"# tightening the 2 screws at the bottom of the bracket. Plug an Ethernet cable into the Ethernet
$%+ with the VESA desktop stand.
"#%+ desktop stand by tightening the screws. 1 4 www.milesight-iot.com www.milesight-iot.com 15 4. Power Supply
/89:;$<=<;
;$ Type-C Port Powered by a PoE injector DS7610 Ethernet cable Power cable DS7610 PoE injector Connect the Type-C port of the IoT Display and the power outlet with Type-C cable. 5. Declaration of Conformity Connect the Ethernet cable of the IoT Display to the Data+Power port of the PoE injector. Plug the power cable from PoE injector to a power outlet. Milesight IoT Display is in conformity with the essential requirements and other relevant provisions of the CE and FCC. Powered by a PoE switch Ethernet cable PoE switch DS7610 Connect the Ethernet cable of the IoT Display to a PoE switch. Powered by a DC power adapter DC power adapter DS7610 Connect the DC power jack of the IoT Display and the power outlet with a DC power adapter(3.5 X 1.3 mm plug). 6. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 1 6 www.milesight-iot.com www.milesight-iot.com 17 instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 1 8 www.milesight-iot.com