1. Packing List 4. Indicator Patterns WS52x Series 1 WS52x Socket 1 x Quick Start Guide 1 x Warranty Card 2. Hardware Introduction Power Button Indicator Power Plug NFC Area Socket Product appearance will differ according to plug types (e.g. EU version, US version, AU version, etc.). 3. Power Button Function Action LED Indicator Power On Power Off Press the power button. Off On On Off Reset to Factory Default Press and hold the button for more than 10 seconds. Blinks constantly. SMART PORTABLE SOCKET FEATURING LoRaWAN When the socket switches off or LED indicator is disabled, the light appears off; when the socket switches on and LED indicator is enabled, the LED indicator patterns can be referred as follows:
Network Status Indicator Status Unregistered Static on, blinks every 15s Registered Successfully Slowly blinks twice After Registration Static on 5. Configuration Guide Step 1: Plug WS52x into a wall socket, then WS52x will switch on automatically. Step 2:
NFC Configuration Preparation:
Smartphone (NFC supported) Milesight ToolBox App: App can be downloaded on Google Play or App Store. N F C 5. Declaration of Conformity Milesight IoT Display is in conformity with the essential requirements and other relevant provisions of the CE and FCC. Step 3:
Press the power button, then the socket can supply the power to appliances. 6. Safety Precautions In order to get best transmission, ensure the device is within the signal range of the LoRaWAN gateway and avoid the obstacles. Do not overload the maximum capacity in order to avoid the damage of the device. The max load capacity may vary by models and you can scan the QR code of Quick Start Guide for more information. The device is intended only for indoor use. Do not place device outdoors where the temperature is below/above operating temperature; do not place the device close to objects with naked flames, heat source (oven or sunlight), cold source, liquid and extreme temperature changes. Keep the device away from water to prevent electric shock. Use the device only in clean environments. Dusty or dirty environments may prevent the proper operation of this device. 6. FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.Reorient or relocate the receiving antenna. 2.Increase the separation between the equipment and receiver. 3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. Cloud App Quick Start Guide All Software & files can be downloaded from https://www.milesight-iot.com/documents-download/
Milesight IoT Co., Ltd. www.milesight-iot.com Add:Building C09,Software Park Phase?III,Xiamen 361024,Fujian,China Do not drop the device or subject it to physical shocks and strong FCC Radiation Exposure Statement:
vibration. Use a dry, clean cloth to clean the device. Do not use strong chemicals or detergents which may damage the device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.