FCC ID: 2A9QC-PD-A4 A4 Printer

Scan to download [MetaPrint] APP Search and download [MetaPrint] APP in the mobile app store.

[MetaPrint]

www.pikdik.com Xiamen PikDik Technology Co., Ltd. Fifth Floor, No.101, Huli Industrial Park, Meixi Road, Tongan District, Xiamen City, Fujian Province, China support@pikdik.com www.pikdik.com help.ayinprinter.com FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

i>) nw

(-) iiliiuclinilitin 20 30 40 50 HUTTE Et Ov os 09 oz 08 06 00 0 09 uitelieiti lili pelican a

Xiamen PikDik Technology Co., Ltd Section 2.911(d)(5)(i) Certification Equipment Type Company name: Xiamen PikDik Technology Co., Ltd Address:Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City Product Name:A4 Printer FCC ID: 2A9QC-PD-A4 Model(s):PD-A4 2.911(d)(5)(i) Equipment Type We, Xiamen PikDik Technology Co., Ltd (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Aaronk Zheng Date: 2023.04.14 Title and Company name:

NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Xiamen PikDik Technology Co., Ltd Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Xiamen PikDik Technology Co., Ltd Address:Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City Product Name:A4 Printer FCC ID: 2A9QC-PD-A4 Model(s):PD-A4 2.911(d)(5)(ii) Applicant filing We, Xiamen PikDik Technology Co., Ltd (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Aaronk Zheng Date: 2023.04.14 Title and Company name:

NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Xiamen PikDik Technology Co., Ltd Section 2.911(d)(7) USA Agent for Service of Process Company name: Xiamen PikDik Technology Co., Ltd Address:Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City Product Name:A4 Printer FCCID: 2A9QC-PD-A4 Model(s):PD-A4 2.911(d)(7) USA Designated Agent for Service of Process We, Xiamen PikDik Technology Co., Ltd (the applicant) designate Stone Trading Limited NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. the designated agent and acknowledge our address and email address of acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd

#2266,Colorado Springs,CO 80918,United States Company name: Xiamen PikDik Technology Co., Ltd Address:Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City FRN Number0033401936 Contact Name:Dongmei Fang Telephone No:+12134573118 Email:compliance@c-shlink.com Signature:

Title:Manager Date:2023.04.14 FCC Grantee Code: 2A9QC Contact Name: AaronkZheng Telephone No: 13850052853 Email: zhengsd@iprt.com.cn Signature:

Title: N/A Date: 2023.04.14 2.911 (d)(7)USA Agent v1.4 Xiamen PikDik Technology Co., Ltd NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4

Xiamen PikDik Technology Co., Ltd Agent Authorization Company:Xiamen PikDik Technology Co., Ltd Address:Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City Product Name:A4 Printer Model Number(s):PD-A4 Product Description:A4 Printer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023.04.14 Name:

Aaronk Zheng Title:

N/A Company: Xiamen PikDik Technology Co., Ltd

Xiamen PikDik Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A9QC-PD-A4 Date: 2023.04.14 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Aaronk Zheng Title:N/A

Xiamen PikDik Technology Co., Ltd Product Similarity Declaration Product name:A4 Printer Model name:PD-A4 D264, PD-A4Pro, A40 FCC ID:2A9QC-PD-A4 We (Xiamen PikDik Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature:

Name:Aaronk Zheng Title: Manager Place, date : Room 1502-3, No. 358, Chengyi Street, Phase III, Software Park, Torch Hi tech Zone, Xiamen City /2023.04.18