MUNBYN Focus on Every Powerful Moment User Manual Version 1.00 Android iOS work with Print Master Version 1.00 Content 1.0 Packing Introduction 2.0 Specication 3.0 Operation 4.0 Quick Connection 5.0 FAQ 6.0 Support 1 2 3 4 5 6 1.0 Packing Introduction Whats in the box?
Cut paper upward Slide down to open the cover Charging interface Version 1.00 IMP032B Page 3 of 10 2.0 Specication 3.0 Operation Printing method Thermal Direct Resolution Print speed Interface 203dpi, 8dots/mm 20mm/s max USB+Bluetooth Lithium Battery 1200mAh Li-On rechargeable Power Adaptor Label width DC 5V/2A 15mm max Working Temperature() 0 50 OPEN Working Humidity 10~50/ 10~90Non-condensing Indicator light Status Situation Storage Temperature() 2070 Green Light Fully charged/Normal use Storage Humidity 40~80/ 5~95 Non-condensing Light Cover opened/Out of paper/Charging Printing life 50km Flash Low power Operating system Android/iOS Light Charging/Bluetooth connected Red Red Blue Version 1.00 IMP032B Page 4 of 10 Version 1.00 IMP032B Page 5 of 10 4.0 Quick Connection 1. Open the cover and load the paper. 5.0 FAQ 2. Scan the QR code below to download the App or search address book when using the App for android?
for Munbyn Print in Google Play or App Store. Q1. Why do I need to open the geographic location and Al. It is Google's rule. Our App needs to abide by this rule on the Google platform. But please rest assured that we will rmly protect user privacy. Q2. Why cannot the printer connect to Bluetooth and print?
A2. You rst need to search for "Munbyn Print" through Google Play or scan the QR code to download the App, then open the App to connect to Bluetooth. Q3. Why does it print blank labels?
A3. Please make sure the printing side of the label is facing up. Version 1.00 IMP032B Page 6 of 10 Version 1.00 IMP032B Page 7 of 10 Q4. Why does the App crash?
A4. Please uninstall and reinstall the latest App. 6.0 Support Q5. Why is the print not clear?
A5. There are many factors that aect print clarity. First, please make sure that the battery is full. Second, adjust the font size, font type and concentration. If the above methods do not work, wipe the print head with an alcohol swab. Q6. Why is printing response time sometimes long?
A6. The reason is that the Bluetooth transmission speed of the cell phone is slow. Please be patient. Q7. Why does it show out of paper when printing?
(The label paper is loaded correctly) A 7. P l e a s e d i s c o n n e c t B l u e t o o t h , re s t a r t B l u e t o o t h t o reconnect App, or restart the App directly. MUNBYN provides 18 months warranty and lifetime free service. If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement. Email: support@munbyn.com (24-7 online support) Website: www.munbyn.com (how-to videos) WhatsApp: +8617817881067 Phone+14034771911 Version 1.00 IMP032B Page 8 of 10 Version 1.00 IMP032B Page 10 of 10 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction