FCC ID: 2A6FW-Y50P Thermal Printer

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Xiamen Print Future Technology Co.,Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: Xiamen Print Future Technology Co.,Ltd. Address:No.17-502,KengPing Road, GuanKou Town,Jimei District Xiamen City,Fujian China Product Name:Thermal Printer FCC ID:2A6FW-Y50P Model(s):Y50P, Y50Pro, Y50, A50, B50, C50, D50, E50, F50, G50, H50, J50, K50, L50, M50, N50, P50, Q50, R50, S50 2.911(d)(5)(i) Equipment Type We, Xiamen Print Future Technology Co.,Ltd. (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name:Eddie Chou Date:2024.3.15 Title and Company name:Manager/Xiamen Print Future Technology Co.,Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Xiamen Print Future Technology Co.,Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Xiamen Print Future Technology Co.,Ltd. Address:No.17-502,KengPing Road, GuanKou Town,Jimei District Xiamen City,Fujian China Product Name:Thermal Printer FCC ID:2A6FW-Y50P Model(s):Y50P, Y50Pro, Y50, A50, B50, C50, D50, E50, F50, G50, H50, J50, K50, L50, M50, N50, P50, Q50, R50, S50 2.911(d)(5)(ii) Applicant filing We, Xiamen Print Future Technology Co.,Ltd. (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:Eddie Chou Date:2024.3.15 Title and Company name:Manager/Xiamen Print Future Technology Co.,Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Xiamen Print Future Technology Co.,Ltd. Agent Authorization Company:Xiamen Print Future Technology Co.,Ltd. Address:No.17-502,KengPing Road, GuanKou Town,Jimei District Xiamen City,Fujian China Product Name:Thermal Printer Model Number(s):Y50P, Y50Pro, Y50, A50, B50, C50, D50, E50, F50, G50, H50, J50, K50, L50, M50, N50, P50, Q50, R50, S50 Product Description:Thermal Printer We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Company: Xiamen Print Future Technology Co.,Ltd. Eddie Chou Manager Date: 2024.3.15

Xiamen Print Future Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A6FW-Y50P To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Date: 2024.3.15 These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Eddie Chou Title:Manager

Xiamen Print Future Technology Co.,Ltd. Model Difference Product description: Thermal Printer Model name: Y50P Y50Pro, Y50, A50, B50, C50, D50, E50, F50, G50, H50, J50, K50, L50, M50, N50, P50, Q50, R50, S50 Trade Name: N/A Only the appearance color is different, the internal structure is the same. Regards Sincerely Clients signature:

Clients name / title :Eddie Chou/Manager Contact information / address: No.17-502,KengPing Road,GuanKou Town,Jimei District,Xiamen City

Xiamen Print Future Technology Co.,Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: Xiamen Print Future Technology Co.,Ltd. Address:No.17-502,KengPing Road, GuanKou Town,Jimei District Xiamen City,Fujian China Product Name:Thermal Printer FCC ID:2A6FW-Y50P Model(s):Y50P, Y50Pro, Y50, A50, B50, C50, D50, E50, F50, G50, H50, J50, K50, L50, M50, N50, P50, Q50, R50, S50 2.911(d)(7) USA Designated Agent for Service of Process We, Xiamen Print Future Technology Co.,Ltd. (the applicant) designate [Stone Trading Limited the applicant.

] NOTE1 for the purpose of accepting service of process on behalf of Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited USA Address: 6547 N Academy Blvd

#2266,Colorado Springs,CO 80918,United States FRN Number0033401936 Contact Name:Dongmei Fang Telephone No:+12134573118 Email:compliance@c-shlink.com Signature:

Title:manager Date:2024.3.15 Applicant Company name:Xiamen Print Future Technology Co.,Ltd. Address:No.17-502,KengPing Road, GuanKou Town,Jimei District Xiamen City,Fujian China Grantee FRN Number:0032255218 FCC Grantee Code:2A6FW Contact Name:Eddie Chou Telephone No:18136659593 Email:edivista@vip.qq.com Signature:

Title: Manager Date:2024.3.15 2.911 (d)(7)USA Agent v1.4 Xiamen Print Future Technology Co.,Ltd. NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4