FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF Exposure Compliance and Control Guidelines and Operating Instructions adhere to the following procedures. This equipment complies with FCC radiation exposure limits set forth for a controlled environment . To control your exposure and ensure compliance with the occupational/controlled environment exposure limits always Guidelines:
Do not remove the RF Exposure Label from the device. User awareness instructions should accompany device when transferred to other users. Do not use this device if the operational requirements described herein are not met. Operating Instructions:
Transmit no more than the rated duty factor of 50% of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT Transmitting 50% of the time, or less, is important because this radio measurable RF energy exposure only when transmitting (in terms of standards compliance). button. generates measuring for Hold the radio in a vertical position in front of face with the microphone (and the other a parts of the radio, Keeping the distance from the antenna. Antenna should be kept away from eyes. including the antenna) at least one inch (2.5 cm) away from the nose. exposures decrease with radio at the proper distance is important because RF When worn on the body, always place the radio in a Xiamen Puxing Electronics Science&
Technology Co., Ltd is important because approved body-worn accessories approved clip, holder, holster, case, or body harness for this product. non-approved may result in exposure levels, which exceed the FCCs occupational/controlled Technology Co., Ltd Using Puxing Electronics Science&
accessories environment RF exposure limits. position in If you are not using a body-worn accessory and are not using the radio in the front of the face, then ensure the antenna and the radio are kept at least 2.5 cm (one inch) om the body when transmitting. Keeping the radio at the proper distanc fr because RF exposures decrease with increasing distance from the antenna. or other manufacturer s the use of e is important Xiamen Use only Xiamen Puxing Electronics Science&Technology Co., Ltd approved supplied or replacement antennas, batteries, and accessories. Use of non-
Science&Technology Co., Ltd the FCC RF exposure guidelines. approved antennas, Xiamen Puxing Electronics batteries, and accessories may exceed