FCC ID: 2AY22-APTG-MO01 ZETA AP

ZETA AP Micro ZETA AP Micro 1 ZETA AP Micro Copyright Statement ZiFiSense owns the copyright on this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of ZiFiSense. Disclaimer This specification is preliminary and is subject to change at any time without prior notice. ZiFiSense assumes no responsibility for any errors contained herein. ZiFiSense is not responsible for any patent infringement of third party on its use or as a result of its uses. Other products/services not certified by the patent license, shall be deemed within patent ownership of ZiFiSense. 2 ZETA AP Micro Table of Contents 5. ................................................................................................ ....................................................................................... Table of Contents 3 2. Applications..................................................................................................... 1. Product Description 4 3. Appearance & Interface................................................................................ 4 Installation........................................................................................................ 5

..................................................................... 6

.......................................................... 5.1. Installation safety notice 6 5.3. Installation tool.................................................................................... 5.2. 6 5.4. Installation steps................................................................................. 6 6. System Testing............................................................................................... 7 7. Common faults and handling....................................................................... 8 8 environment check Installation 3 1. Product Description ZETA AP Micro AP Micro is a new generation of ZETA gateway for logistics, asset management and other fields. Support ZETA-G protocol of ZETag access, can effectively supplement mobile scene coverage. Support periodic GPS pointing, track upload, remote upgrade and other functions. Combined with a cloud-based management platform, it provides a everywhere network and uninterrupted operation supervision for logistics management and asset tracking. 2. Applications GPS pointing, track upload Rechargeable battery for extended life Very low cost, coverage supplementary 3. Device Specifications Model No. APTG-MO01 Protocol ZETA Frequency band 920-925 Output power No Tx Number of channels 61 Wireless Electrical Power supply Rechargeable battery: 5000mAh DC 5V Power Size 5W 110*117*28.5 mm Physical Enclosure material SPCC Antenna Monopole antenna

-20~+75 Environmental Operating temperature

-30~+85 Storage temperature 4 4. Appearance & Interface ZETA AP Micro 5 ZETA AP Micro 5. Installation 5.1. Installation safety notice It is forbidden to operate with electricity when installing, wiring and dismantling the equipment. Place the equipment in a ventilated place to ensure that the equipment is installed in a dry environment. Avoid placing the equipment in a high temperature or low temperature environment. The installation location of the equipment should be far away from high-voltage cables to avoid electromagnetic interference during operation. The equipment should be far away from the environment of strong thunderstorm and strong electric field. Please fix the equipment firmly. 5.2. Installation environment check The RF antenna is installed vertically, and there should be no large metal shields such as metal pillars, large metal boxes, etc. within 1 meter around (the upper and lower metal will not affect it). The installation location needs to consider the power supply of the equipment. This equipment uses AC100 ~ 240V, a 2-hole power adapter, and the power cord is 3 meters in length. 5.3. Installation tool Before installing the equipment, prepare the following installation tools Name and auxiliary materials:

No. Use Case Screwdriver Wrench(#10) For AP bracket, antenna, hoop and other screws For fixing screw nuts Expansion screw few Used for equipment installation Electric percussion drill Tool pliers For wall turning for the expansion screw Used to screw the ground wire Strapping tape few For wire fixing 1 1 1 1 6 ZETA AP Micro 5.4. Installation steps 1) Confirm the installation hole spacing: the four-corner hole can be used 2) Use the supporting expansion screws to fix the equipment on the wall for fixed installation. of the building. Figure 2: Installation diagram 3) Connect the RF antenna and the 4G antenna. The GPS antenna may not be connected when it is installed in a fixed place in the indoor environment. Figure 3: RF antenna installation 4) Arrange the cables and confirm that corresponding cable laying specifications. they comply with the 7 6. System Testing ZETA AP Micro Three minutes after the gateway is powered on, the online information of the gateway can be seen on the IoT platform;

After the gateway is online, it can be connected to the lower-level network element equipment, and the data of the lower-level network element equipment is uploaded to the platform for display through the gateway route;

7. Common faults and handling Check the power supply to ensure that the gateway is powered normally. Check the antenna, whether the antennas are connected correctly, and whether they are properly tightened. Check the network cable and check if the network cable is properly connected. Check the status light to check whether the two status lights on the gateway core board are normal (one is always on, and one flashes twice in one second) View the platform device status. In the (Management Platform -

Gateway Management) list, check whether the current device status is

"Online". Check whether the heartbeat packet of the gateway (once per minute) is normal. If it still does not work, you can power it on again, start the gateway device, and check to see if it is restored. Contact ZiFiSense for more solutions. 8 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC PART15 Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. ZETA AP Micro 9

Label location Size:15*10mm M/N: APTG-MO01 FCC ID: 2AY22-APTG-MO01 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Xiamen ZiFiSense InfoTech Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021-03-17 Subject: Request for Confidentiality FCC ID: 2AY22-APTG-MO01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Long-Term Confidentiality Short-Term Confidentiality NOTE 2 Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info No No No No No No No No No No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Paul Li Title: Manager 1/1

Xiamen ZiFiSense InfoTech Co., Ltd Model Difference Product Name: ZETA AP Model Number: APTG-MO01, APTG-MO10 FCC Identifier: 2AY22-APTG-MO01 All the models are the same circuit and RF module, except the model names and outlook color. Regards Sincerely Clients signature Clients name / title : Paul Li / Manager Contact information / address: Room 803, Building A-05, Software Park Phase III, Jimei District, Xiamen, China

Xiamen ZiFiSense InfoTech Co., Ltd Letter of Authorization Company: Xiamen ZiFiSense InfoTech Co., Ltd Address: Room 803, Building A-05, Software Park Phase III, Jimei District, Xiamen, China Product Name: ZETA AP Model Number: APTG-MO01, APTG-MO10 FCC Identifier: 2AY22-APTG-MO01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Date: 2021-03-17 Name:

Title: Manager Signature of applicant: Paul Li 1/1