IRZ1ZT92
ZETA Motion Sensor
1
IRZ1ZT92
Copyright Statement
ZiFiSense owns the copyright on this specification. No part of
this specification may be reproduced in any form or means,
without the prior written consent of ZiFiSense.
Disclaimer
This specification is preliminary and is subject to change at any
time without prior notice. ZiFiSense assumes no responsibility
for any errors contained herein. ZiFiSense is not responsible for
any patent infringement of third party on its use or as a result
of its uses. Other products/services not certified by the patent
license, shall be deemed within patent ownership of ZiFiSense.
2
IRZ1ZT92
Table of Contents
1. Product Description.........................................................................................................................4
2. Applications....................................................................................................................................... 4
3. Appearance........................................................................................................................................ 4
4. Features.............................................................................................................................................. 4
5. Product parameters......................................................................................................................... 5
6. Packing List....................................................................................................................................... 5
7. Installation..........................................................................................................................................6
7.1. Screw...................................................................................................................................... 6
7.2. Adhesive 3M.......................................................................................................................... 8
7.3. Cable Ties.............................................................................................................................. 9
8. Use of Device...................................................................................................................................12
8.1. Power on.............................................................................................................................. 12
8.2. Support function.................................................................................................................. 12
9. Common faults and handling......................................................................................................12
3
1. Product Description
IRZ1ZT92
ZETA Motion Sensor is a low power infrared sensor which can sense
human movements with its high-sensitivity amplifiers, anti-jamming
devices, and differential inputs, so that the false detection is avoided.
2. Applications
Rooftops, computer rooms,
detection, operating position detection.
3. Features
important equipment rooms,
illegal entry
Wireless transmission
Battery-powered, low power consumption
Easy to install, high sensitivity
Reliable detection
Real-time transmission
4
4. Product parameters
IRZ1ZT92
Product No.
IRZ1ZT92
Transmission protocol
ZETA
Wireless Features
Frequency band
Output power
Sub-GHz, adjustable according to
local regulations
20dBm max, adjustable according
to local regulations
Electrical Features
Power supply
Battery, 2*ER14505
Battery capacity
2*2700 mAh
Stand-by current
≤ 10 μA
Working current
≤ 70 mA
Size
66*55*36 mm
Physical Features
Enclosure material
Waterproof level
ABS
IP30
Antenna
External glue stick antenna
Sensor
Characteristics
Working
Environment
Sensing distance
°
3~5m
Sensing angle
120
℃
℃
Operating temperature
℃
-20
~+75
℃
Storage temperature
-30
~+85
5. Packing List
Motion Sensor
Battery
1
2
5
6. Installation
IRZ1ZT92
There are three installation methods: Screw, 3M Adhesive and cable ties.
6.1. Screw
6.1.1.Auxiliary material
No. Materials
1
2
self tapping screw (M3*20)
#4 expanded plastic pipe
,
,
3
4
Percussion drill
#4 drill bit
hammer
slotted screwdriver, cross screwdriver
6.1.2.Installation instructions
Use a slotted screwdriver to open the top cover from the bottom edge.
Open the device case
Quantity
2/device
2
1
1
opening
Place the device in the mounting position, punch and insert the expanded
plastic pipe.
Punching
Fixation
6
IRZ1ZT92
Use the self-tapping screws to secure the device in the mounting position.
mounting hole
mounting hole
Power on
Insert the power plug into the upper power socket, install two 14505
batteries (remove the insulation sheet for the existing battery), and close
the upper cover.
power socket
7
6.2. Adhesive 3M
6.2.1.Auxiliary material
IRZ1ZT92
No. Materials
Quantity
3M seamless thickened double-sided adhesive
5CM
Slotted screwdriver, utility knife
2
1
2
6.2.2.Installation instructions
Installation position
Select a flat mounting position, and clean it up.
Open the device case
Use a slotted screwdriver to open the top cover from the bottom edge.
opening
Power on
Insert the power plug into the upper power socket, install two 14505
batteries (remove the insulation sheet for the existing battery), and close
the upper cover.
8
IRZ1ZT92
power socket
Adhesive device
Take the appropriate amount of 3M adhesive, attach it to the back of the
sensor, remove the protective film of the 3M adhesive, and install the
device to the specified position.
6.3. Cable Ties
6.3.1.Auxiliary material
No. Materials
(
1
2
Metal cable ties
5*300mm)
Slotted screwdriver, utility knife
6.3.2.Installation instructions
Quantity
2
Open the device case
Use a slotted screwdriver to open the top cover from the bottom edge.
9
IRZ1ZT92
opening
Fixation
Pass the 2 cable ties through the device and secure to the installation rod
Installation position
10
IRZ1ZT92
Power on
Insert the power plug into the upper power socket, install two 14505
batteries (remove the insulation sheet for the existing battery), and close
the upper cover.
power socket
11
7. Use of Device
IRZ1ZT92
The sensor detection distance is about about 3 meters without occlusion.
The detection is based on the amount of change in infrared detection to
determine whether there is the motion, so it is unable to detect a
stationary person.
7.1. Power on
Place the device within the coverage of the ZETA network, install the
battery, and wait for the device to go online. After the device is online, the
current device status is reported. You can set the threshold for motion
detected and the threshold for no motion detected according to the usage
scenario.
7.2. Support function
Status report: Reports motion/no motion detected status.
Set threshold for motion detected: within the detection time range, the
sensor reaches the required number of triggers is determined as
motion detected. (Default setting for motion detected is: triggered 2
times in 5 seconds.)
Set threshold for no motion detected: When the current status is
Motion Detected, and if the number of triggers is 0 within the detection
time range, it will be determined as No Motion. (Default setting for no
motion detected is, triggered 0 times in 20 seconds.)
Query device status:Query the current threshold status for motion
detected/no motion set by the device.
8. Common faults and handling
Ensure ZETA signal coverage
Ensure that the device is powered on, and the ZETA network device
management platform can observe that the ZETA module is on line
Check the battery usage of the device. When the battery is low, replace
the battery in time.
12
FCC WARNING
Any Changes expressly or modifications not approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
IRZ1ZT92
13