FCC ID: 2BCQ2-S60 remote control aircraft

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

LABEL AND LOCATION remote control aircraft Model: S60 Input: DC 4.5V by AA*2 FCC ID: 2BCQ2-S60

(Size: L5.00cm x 2.00cm) Label Location _____________________________________________________________________________________________________

Date: 0915/2028 Federal Communications Commissions Authorization and Evalation Dion 77435 Oakland Nils Road Columbia, MD 21046 RE: CFR 47 2.911 ()(7) FCC US Agent Letter of Attestation Grantee Code:28002 To whom itmay concern:

FCC US Agent Agent Company Name-VISHTEC LLC FOCFRN: oosaart contact Person: Alan Graham Agent US Address: Room 1050, 6888, Belleview Ave Sie 2142 Demer, CO #0123, Agent Emad: Address.alongraham@vehec.con This ltteris to confirm that we have accepted the resporsbilly to act as US Agent on behall of XiaWWei Tectndtogy Co.,Ltd Regarding this FCC ID-28Ca2-$60 Term: 2028.00.15-2024.00.14 We are aware of tie requirements and resporsibiltes ofthe applicant's agent for service of process as outlined in the FCC section 291 1(d)(7) and Report and Order FCC 22-84 paragraph 63.

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BCQ2-S60 Model name S60, S601, S602, S603, S604, S605, S606, S607, S608, S609, S610, S611, S612, E58, E88, E99, G801, G802, G803, G804, G805 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-09-20 Name / Title: Weimao Hong / CEO Company: XiaWei Technology Co., Ltd. Address: Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Phone: +86-13825860878 Fax Number: N/A E-Mail: 924248283@qq.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: XiaWei Technology Co., Ltd. Address:

Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Phone: +86-13825860878 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. FCC ID: 2BCQ2-S60 If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-09-20 Name / Title: Weimao Hong / CEO Company: XiaWei Technology Co., Ltd. Address: Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Phone: +86-13825860878 Fax Number: N/A E-Mail: 924248283@qq.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BCQ2-S60 We, applicant Model name S60, S601, S602, S603, S604, S605, S606, S607, S608, S609, S610, S611, S612, E58, E88, E99, G801, G802, G803, G804, G805 Company Name: XiaWei Technology Co., Ltd. Address:

Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Phone: +86-13825860878 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-09-20 Name / Title: Weimao Hong / CEO Company: XiaWei Technology Co., Ltd. Address: Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Phone: +86-13825860878 Fax Number: N/A E-Mail: 924248283@qq.com

XiaWei Technology Co., Ltd. Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China. Date: September 20, 2023 FCC ID: 2BCQ2-S60 Model Number: S60, S601, S602, S603, S604, S605, S606, S607, S608, S609, S610, S611, S612, E58, E88, E99, G801, G802, G803, G804, G805 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, XiaWei Technology Co., Ltd. hereby declare that our product (remote control aircraft) Model Number: S60, S601, S602, S603, S604, S605, S606, S607, S608, S609, S610, S611, S612, E58, E88, E99, G801, G802, G803, G804, G805 board, Schematic, Hardware version, Software version, structure and internal photos are same, named and appearance differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Wei Mao Hong / CEO Company: XiaWei Technology Co., Ltd. Address: Room 110, Building 6, Baiyue Spring Garden, No. 106 Changjiang Road, Longhu District, Shantou City, Guangdong Province, China Phone: +86-13825860878 Fax Number: N/A E-Mail: 924248283@qq.com