Light Up Logo Deskstop Speaker FCC ID:2ALCFXO-9742-1 o LED light o Power Button o Micro-USB Charging Port o LED Indicator o Mic o Whats included:
1 x Speaker 1 x USB to Micro-USB charging cable 1 x Instruction Manual Tech Specifications o Input: DC 5V/350mA o Paring name :
o Bluetooth version: 5.0 o Rated output power: 3W o Battery type: Li-Polymer o Battery Capacity:800MAH o Instructions:
Using the LED light:
Press the button,turn on the light, the LED will light in colorful ;press the button again, the LED will light in white;press the button again to turn off the LED. Pairing the speaker:
Press and hold the Power Button to turn speaker ON/OFF. The Blue LED Indicator will flash to indicate pairing mode. Select "Light Up BT Speaker " on your device with computer or mobile to pair, Charging the speaker:
a. Using a regulated USB adapter. Connect a USB cable to a USB adapter. Using the Micro-USB connector, connect the other end of the USB cable to the charging port on the speaker. Plug the USB adapter into the outlet to begin charging. The LED will light up in red while in charging, turns o when fully charged. b. Using your computer. Connect a USB cable to a USB outlet on your computer. Using the Micro-USB connector, connect the other end of the USB cable to an charging port on the speaker. Make sure the computer is on to begin charging the speaker. c. There's a wireless receiver at the bottom of the speaker, the speaker can be wireless charged by a wireless charging device Using the speaker:
When receiving a phone call, the speaker will pause the current audio. Press the Play/Answer button to answer the call, press this button again to end the call. Short press Long press Short press Long press Short press
: next track
: volume increase
: previous track
: volume decrease
: play/pause the audio NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.