Wireless charging with clock FCC ID: 2ADK3-XO-9757 Using the Clock
- Connect the provided charging cable to a power source and to the micro USB port on
-
-
the clock. (The clock display will show time and the backlight will light up.) Tap the top of clock to temporarily turn on the backlight. Press the [ ] button to toggle between the clock time and the alarm time. The clock display will show the [ ] icon when in time mode, and the [ ] icon when in alarm mode.
- When in time mode, press the [ button to toggle between the 12-hour and the 24-
hour clock. Setting the Time and Date To set the clock time, first make sure you are in time mode. 1. Press the [ ] button, the hour digit will flash. Adjust the hour using the [ ] button and [ ] buttons. The clock will show [ ] when in PM time. 2. Press the [ ] button to confirm the hour and set the minute. 3. Continue the above steps to set the year, month and day. Setting the Alarm Time To set the clock time, first make sure you are in alarm mode. 1. Press the [ ] button, the hour digit will flash. Adjust the hour using the [ ] button and [ ] buttons. The clock will show [ ] when in PM time. 2. Press the [ ] button to confirm the hour and set the minute. 3. Continue the above steps to set the snooze interval and alarm tone choice. Turning the Alarm ON/OFF When in alarm mode, press either the [ ] button or the [
] button to enable the alarm. The [ ] icon will appear in the lower right corner of the display, indicating that the alarm is enabled. Press again to enable the alarm and custom snooze function. The [ ] icon and the [ ]
icon will both appear in the lower right corner of the display, indicating that the alarm and custom snooze are both enabled. Press a third time to disable these functions. Neither the The [ ] icon and the [ ] icon will appear in the lower right corner of display. Setting temperature :
To set the temperature , first make sure you are in time mode.
- When in time mode, press the[ ]button to toggle between Celsius to Fahrenheit. NOTE: You must be in alarm mode to turn the alarm and custom snooze ON or OFF. Snoozing the Alarm Note: The snooze function must be ON in order to snooze the alarm. When the alarm is ringing, tap the top of clock or press the [ ] button or the [ ] button to snooze the alarm. When the snooze function is on, the the [ ] icon will flash. To completely disable the alarm until the next day, press the [ ] button. Wireless Charging Connect the provided charging cable to a 5V/2A power source and to the micro USB port on the clock. Please Qi wireless charging enabled devices on top of the clock, the devices will be charged automatically. LED indicator will turn blue when charging. LED indicator will flash in red and blue alternatively when put non wireless charging enabled devices on top of the clock. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.