5G IP Camera User Manual 5G IP Camera Document Version User Manual V1.1.0 Pages 25 5G IP Camera XTEE50216 User Manual Provided by Xingtera Inc. Santa Clara USA Qualcomm Smart City Accelerator Program Member 5G IP Camera User Manual FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. 5G IP Camera User Manual CONTENT Chapter 1 Brief Introduction of Product ................................................................... 1 1.1 General ..................................................................................................................... 1 1.2 Word Definition ......................................................................................................... 2 Chapter 2 IP Camera System .................................................................................... 3 2.1 Features ................................................................................................................................... 3 2.1.1 Network ..................................................................................................................................... 3 2.1.2 System ...................................................................................................................................... 3 2.1.3 External Interface ...................................................................................................................... 3 2.1.4 Cloud Platform .......................................................................................................................... 3 2.1.5 Other Web Functions ................................................................................................................ 4 2.2 Performance ............................................................................................................................ 4 2.2.1 Streaming Concurrency ............................................................................................................ 4 2.3.1 Video Storage ........................................................................................................................... 4 Chapter 3 Operating Environment ............................................................................ 5 3.1 3.2 Computer requirement ........................................................................................................... 5 Connection .............................................................................................................................. 5 3.2.1 Equipment power supply .......................................................................................................... 5 3.2.2 Network connection .................................................................................................................. 7 3.2.3 Access to devices ..................................................................................................................... 7 3.2.4 Device login .............................................................................................................................. 9 Chapter 4 Main Function .......................................................................................... 11 4.1 Local Web Management Portal ............................................................................................ 11 4.1.1 Login ....................................................................................................................................... 11 4.1.2 Configuration .......................................................................................................................... 12 4.1.3 Display Setting ........................................................................................................................ 12 4.1.4 Video Setting........................................................................................................................... 13 4.1.5 Real-time Video ...................................................................................................................... 13 4.1.6 Video Playback ....................................................................................................................... 18 4.1.7 Video Record Schedule .......................................................................................................... 19 4.1.8 Alarm ....................................................................................................................................... 20 4.1.9 Storage Configuration ............................................................................................................. 20 4.1.10 Network Configuration ............................................................................................................ 21 5G IP Camera User Manual 4.1.11 4G/5G Configuration .............................................................................................................. 22 4.1.12 Cloud Platform Configuration ................................................................................................. 22 4.1.13 SMTP .................................................................................................................................... 23 4.1.14 RTMP Configuration .............................................................................................................. 24 4.1.15 Device Upgrade .................................................................................................................... 24 4.2 Video Stream RTSP Connection ......................................................................................... 25 5G IP Camera User Manual Chapter 1 Brief Introduction of Product 1.1 General IP Camera series provides a comprehensive range of security and surveillance solution to meet users requirement. The cameras can be set up in a network and controlled or managed locally and remotely. Users can use it as an independent monitoring camera or connect to an NVR to build a surveillance system. With the APP and cloud platform, users will be able to access the camera on a mobile phone and other computer devices. IP cameras use the high-performance CPU and other industrial-grade units, with the embedded real-time operating system as the software support platform. The cameras support H.265/H.264/MJPEG video compression algorithm and industry-leading HD dual-stream technology to achieve the highest level of video image quality under the limited network resources. It is fully functional, supporting for flexible and comprehensive alarm linkage mechanism, day and night auto switch, smart PTZ control and privacy masking, etc.*
The product has been widely used in the M2M industry of the IoT industrial chain, such as smart grid, intelligent transportation, smart home, finance, mobile POS terminals, supply chain automation, industrial automation, intelligent building, fire protection, public safety, environmental protection, meteorology, digital medical, telemetry, agriculture, forestry, water, coal, petrochemical and other related fields. 5G IP Camera Page 1 of 25 1.2 Word Definition 5G IP Camera User Manual Word IPC H.264 H.265 MJPEG SIP WDR RTSP Explanation IP Camera Advanced Video Coding (MPEG-4 AVC) is a block-oriented motion-compensation-based video compression standard. High Efficiency Video Coding(HEVC), also known as H.265 and MPEG-H Part 2, is a video compression standard, designed as a successor to the widely used AVC
(H.264 or MPEG-4 Part 10). Motion JPEG (M-JPEG or MJPEG) is a video compression format in which each video frame or interlaced field of a digital video sequence is compressed separately as a JPEG image. The Session Initiation Protocol (SIP) is a signaling protocol used for initiating, maintaining, and terminating real-time sessions that include voice, video and messaging applications. Wide Dynamic Range (WDR) is a term used in the surveillance camera industry to refer to high-dynamic-range imaging. The Real Time Streaming Protocol (RTSP) is a network control protocol designed for use in entertainment and communications systems to control streaming media servers. 5G IP Camera Page 2 of 25 Chapter 2 IP Camera System 5G IP Camera User Manual 2.1 Features 2.1.1 Network Ethernet: 1*RJ45 10M/100M Ethernet Port Network Storage: NFSCIFS/SMB Protocol: IPv4/IPv6, TCP, UDP, RTP, RTSP, RTCP, HTTP, HTTPS, DNS, DDNS, DHCP, FTP, NTP, SMTP 2.1.2 System Service Management Audio
Video Storage: Support Micro SD/SDHC/SDXC Card Local Storage, up to 128G ervice Advanced Function: Motion Detection, Privacy Masking, Backlight Compensation, HLC, 2D DNR, 3D DNR, ROI, Anti-fog, White Balance, EIS, IP Address Filtering Event Trigger: Motion Detection, Network Disconnection, External Input, Audio Alarm, etc. Event Action: FTP Upload/SMTP Upload/SD Card Record or Snapshot System Compatibility: Onvif Profile S, GB/T28181 2.1.3 External Interface Power: DC-12v or POE Audio: 1*
Alarm: 1 Alarm In+1 Alarm Out (Port can Drive 12V or 5V Relay)*
Relay Out: 1 Relay OUT*
ADC In: 1 8bit IN*
UART Port: TTL@115200bps Or Expansion for RS485*
* = Optional 2.1.4 Cloud Platform 5G IP Camera Page 3 of 25 5G IP Camera User Manual Remote web server device management cloud platform for user to do remote status monitoring, configuration and update, etc. 2.1.5 Other Web Functions Local web server for device configuration, system maintenance, storage management, video monitoring, etc. Video Playback: Support video playback on web browser NTP: NTP with RTC, support timed reboot, scheduled power on or off Internet: Support IPv4 & IPv6, including static IP and DHCP. External PTZ: RS232/RS485 + Pelco-D 2.2 Performance 2.2.1 Streaming Concurrency Support maximum 10 ways video real-time streaming when all 3 stream types are on.
(Primary, Secondary and Tertiary stream. 2 ways 1080P, 1 way D1 30fps, using H264/H265/MJPEG) 2.3.1 Video Storage Support 1 way SD card scheduled video recording & image capture, multi-way SD card alarm recording & capture. 5G IP Camera Page 4 of 25 Chapter 3 Operating Environment 5G IP Camera User Manual 3.1 Computer requirement Recommended Windows 8 and above. IE 11 or above. 3.2 Connection 3.2.1 Equipment power supply IP camera supports PoE power supply and DC 9-60V wide voltage power supply. Users can choose one of the power supply modes to power the equipment. The power supply and network interface can be seen at the end of the camera after the screws around the cover plate are removed. Power interface diagram:
5G IP Camera Page 5 of 25 Terminal Interface:
5G IP Camera User Manual When the device is normally powered on, the infrared light at the front of the camera will flash quickly, and there will be a slight clicking sound inside the lens. At the same time, when the back cover is opened, it can be seen that there are lights inside. 5G IP Camera Page 6 of 25 5G IP Camera User Manual 3.2.2 Network connection The camera can be connected to the computer for debugging and configuration in the following ways:
1. Direct computer connection 2. Connect through a switch or router 3.2.3 Access to devices Factory default configuration page address of IPC is http://192.168.1.100. Default user name is admin, the password is admin. If the computer and the camera are in a different network segment so that customer cannot directly access the camera from the computer. In the case of a direct computer connection, it is necessary to set a fixed IP address for the computer first. The specific operation is as follows:
1. Open the Network Connections page of the computer and right-click the Ethernet and choose properties. 5G IP Camera Page 7 of 25 5G IP Camera User Manual 2. Modify IPv4. 5G IP Camera Page 8 of 25 3. Set the COMPUTER IP to any address in 192.168.1.x network segment. 5G IP Camera User Manual 4. Try to access the IP camera configuration web page http://192.168.1.100 from Internet Explorer. 3.2.4 Device login 1. Open IE browser (IE 8.0 or above) and enter the IP address of IPC. 2. Enter ID and password to login. Notice:
1. Initial account of standard version: admin; Password: admin. 5G IP Camera Page 9 of 25 2. The user needs to install the video plug-in when the user login to IE for the first time. Click and download the video player plug-in. 5G IP Camera User Manual 3. After finish downloading, install the video plug-in. 4. After finish installing the video plug-in, refresh the IE. Users can check real-time video monitoring on IE and user can operate different functions of IPC on this web interface. 5G IP Camera Page 10 of 25 5G IP Camera User Manual Chapter 4 Main Function 4.1 Local Web Management Portal We recommend using Windows Internet Explorer to get the best user experience. You may require installing some plug-ins before you use the web portal. 4.1.1 Login The default login credential is printed on a tag on your camera. The login IP address is 192.168.1.100, username is admin, and password is admin unless you have changed them before. Type in the address and user info, click login to enter the management portal. 5G IP Camera Page 11 of 25 5G IP Camera User Manual 4.1.2 Configuration Click the Configuration tab on the top menu, user can manage the IPC from the following page. The side menu has list out all the items that user can configure. User can do detail configuration on the right side of the side menu after clicking the related item. 4.1.3 Display Setting Support web video image adjustment, including Basic Settings, Day & Night Switch, OSD, Private Mask, ROI, etc. 5G IP Camera Page 12 of 25 5G IP Camera User Manual 4.1.4 Video Setting Support video configuration, including Stream Type, Video Format, Resolution, Quality, Time, Bit Rate, CBR/VBR Type, etc. 4.1.5 Real-time Video Real-time video is supported in IPC web interface and user can control the IPC remotely at the same time. Processes:
1. Login the IPC web interface. 5G IP Camera Page 13 of 25 2. Click preview option on the top of the menu. At the lower right corner, user can remote control IPC such as play/stop live video, snapshots, video recording. Some cameras can support lens zoom, focus and other features. 5G IP Camera User Manual 3. On the video preview interface, the recording videos and snapshot are stored on the local disk. After finish record the video or snapshot, the system will automatically pop up the local disk window of the recording video/snapshot so that users can view it at the same time. 5G IP Camera Page 14 of 25 4. User can setting the record video storage path on the IPC web interface. 5G IP Camera User Manual 5G IP Camera Page 15 of 25 Buttons of image setting:
5G IP Camera User Manual Button Description Primary stream Secondary stream Window size Real size Full scream size Protocol setting Play Stop Snapshot Brightness Contrast Sharpness Noise reduction level Default Video recording Saturation 5G IP Camera Page 16 of 25 Buttons of IPC remote control:
5G IP Camera User Manual Button Description Len configuration Zoom in Zoom out Focus increase Focus reduce Iris increase Iris reduce Focus speed Lens initialization Auxiliary focus Auto iris 5G IP Camera Page 17 of 25 5G IP Camera User Manual 4.1.6 Video Playback The IPC web interface supports video playback function. User can use the IPC web interface to play the recorded video from the IPC storage directly. You may require to install plug-ins before you use this function. Processes:
1. Click the playback on the top of menu. 2. Select the date and time on the right side. 3. Click the play button to playback the video. 5G IP Camera Page 18 of 25 5G IP Camera User Manual 4.1.7 Video Record Schedule User can set the recording schedule so that the IP camera can record automatically at regular intervals. Processes:
1. Click the configuration on the top of menu. 2. Select the storage option on the left side. 3. Choose record schedule on the top. 4. Enable the record schedule. 5. Choose the disk. 6. Select the recording day & time period and save. 5G IP Camera Page 19 of 25 5G IP Camera User Manual 4.1.8 Alarm The product supports various event alarm functions, by setting up some trigger conditions and the related actions to inform user to check and take action. 4.1.9 Storage Configuration The product support storage management, storage configuration, file search, scheduled recording, scheduled image capture, etc. 5G IP Camera Page 20 of 25 5G IP Camera User Manual 4.1.10 Network Configuration The communication port used by the device to transmit data can be configured on the port setting page. The default port numbers used by http/https/rtsp are 80/443/554. If you want to use RTSP to connect, please try to fill in the target address in the following format, rtsp://user:pass@192.168.1.100:554/main
(user:pass needs to be replaced with the username and password of the system. Default admin:admin) The IPC device supports two types of IP address configuration methods: fixed IP, or DHCP Client. The configuration interface is shown in the figure below. 5G IP Camera Page 21 of 25 5G IP Camera User Manual 4.1.11 4G/5G Configuration 1. Insert the SIM card to the IPC. Click the Network option on the left side of the IPC Web interface and choose 4G/5G on the top of the menu. Enable the 4G/5G Notice:
1. Make sure the network state is connected, has an IP address and the signal value is above 15. 2. The network state is at least 4G or LTE. 4.1.12 Cloud Platform Configuration 1. Click the Cloud on the top of the menu, enable it and save. Check the status and copy the device registration ID. (The cloud server address and server port may change by the customers local server and local port) Notice: This Cloud Platform Configuration is just for Xingtera private cloud platform. 5G IP Camera Page 22 of 25 5G IP Camera User Manual 4.1.13 SMTP 5G IP Camera Page 23 of 25 5G IP Camera User Manual 4.1.14 RTMP Configuration 1. Setup RTMP client related parameters, include IP Address / Port / Stream Name /
Stream Path. Click Enable and then save configuration. 2. The current connection status of RTMP can be displayed on the current page. 4.1.15 Device Upgrade 3. Remote Upgrade: Upload the new firmware through the cloud server API, click the upgrade button on the related web page. The cloud server will automatically send the firmware to the IPC to finish the upgrade. After the upgrade, it will return the result to the web server. 4. Local Upgrade: Select the new firmware from the local web portal, the web page will send the firmware to the IPC to finish the upgrade. After the upgrade, it will return the result to the page. 5G IP Camera Page 24 of 25 5G IP Camera User Manual 4.2 Video Stream RTSP Connection IPC system provides RTSP protocol to streaming video through network. By typing the RTSP address and port, verify the username and password, user will be able to watch the real-time video streaming on web page, VLC or network video players. If you want to use RTSP to connect, please try to fill in the target address in the following format, rtsp://user:pass@192.168.1.100:554/main
(user:pass needs to be replaced with the username and password of the IPC system. Default admin:admin) It also supports video streaming through cloud server or from APP. Contact your sales for cloud server license. 5G IP Camera Page 25 of 25