XT-4860G2 User Guide Model: XT-4860G2 FCC ID: GKM-XT4820 IC ID: IC: 10281A-XT4820 Version 1.0 1 2 Table of Contents Document Change History .......................................................................................... 4 1 Introduction ............................................................................................................ 5 1.1 Feature Matrix ................................................................................................................................................................................. 5 2 Hardware Description .............................................................................................. 6 2.1 Hardware Specifications ............................................................................................................................................................. 7 2.2 Cable Harness Description ......................................................................................................................................................... 8 2.3 LED Description .............................................................................................................................................................................. 8 3 Device Mounting Options ........................................................................................ 9 3.1 Screw Mounting .............................................................................................................................................................................. 9 3.2 Magnetic Mounting ........................................................................................................................................................................ 9 3.3 Optional Cradle Mounting ........................................................................................................................................................ 10 4 Quick Start Guide ................................................................................................... 11 4.1 Device Wakeup ............................................................................................................................................................................. 11 4.2 Configuring the Device via SMS .............................................................................................................................................. 12 3 Document Change History Revision 1.0 Date Author 10/02/2014 N Barakat Changes Document Initial Release 4 1 Introduction XT-4860G2 is an energy harvesting global multi-band 3G Dual Band platform supporting long term, remote deployments without the need to replace the self-charging battery. This installation guide describes the physical hardware, associated parts, the different mounting options available, and a quick start-up procedure. 1.1 Feature Matrix Feature Description Base Unit Zigbee Upgrade 3G Communication Module with 2G fallback GPS Receiver for Tracking Applications Supports SMS, TCP, UDP, FTP Over-the-air Configuration and FW Upgrade Location Polling Periodic Reporting Wired or Virtual Ignition On/Off Reporting Direction Change Alerts Speed Threshold Alerts Mileage Threshold Alerts Main Battery Disconnect Alerts Heartbeat and Power-up/Reset Alerts Ignition Idle Alert (wired ignition only) Towing Start/Stop Alerts(wired ignition only) Movement Start/Stop Alerts (wired ignition only) 2 Digital Inputs Park Time Alerts (wired ignition only) Virtual Odometer Motion Sleep/Wake Configuration Settings Geofence (Radial, Rectangular, and Polygonal) Device Diagnostics (Battery voltage, connectivity, etc.) Wireless Sensor Connectivity Inter-device Communication 5 2 Hardware Description Below is a depiction of key interfaces of the XT-4860G2:
Wake-up/
Zigbee Pairing Button Zigb Device Label Solar Panel LED Indicators 7-Pin Bayonet Connector The Associated Cable Harness that interfaces with the unit is shown below:
6 2.1 Hardware Specifications 3G UMTS/HSDPA/HSUPA XT-4860G2 Dual-band Support Band II 1900 MHz Band V 850 MHz 50 channels
-161 dBm
+/- 2.5m CEP (50% , -130 dBm, > 6 Satellites)
<33 sec
< 1 sec 8-24V, 12 V nominal Internal 6600mAh rechargeable Li-Ion 8-pin attached harness Serial (UART Logic Level) Internal Internal ABS plastic with weather-proofing for outdoor use 7.6 X 4.9 X 1.4
< 18 oz. (Estimated)
-30C to +70C PTCRB ATT IC IP67 AT&T Technology Model Frequency Band GPS Specification Receiver 50 channels Receiver tracking Sensitivity Accuracy Cold Start Hot Start Power Requirements D.C. Power Battery Physical Connection Interface Connector Cellular/GPS Antenna SIM Access Programming Mechanical Case Material Dimension Weight Operating Temperature Certifications Product Carrier 7 2.2 Cable Harness Description Pin #
Wire Color Pin Name Functional Description Port Characteristic White Yellow IN1 IN2 Ignition Sense Input port Black Green Ground Out Ground Output Port (Defaulted open circuit) External battery negative terminal Blue UART-Rx Brown UART-Tx 8v to 24v, Internally pulled low 2.4 to 24V, < 0.2 V Note: Internally pulled high 3.3V Logic Interface Com Port Settings:
Baud rate: 115200 bps; Flow control:
None; 8N1 3.3V Logic Interface Com Port Settings:
Baud rate: 115200 bps; Flow control:
None;8N1 Red Orange VBATT Main battery voltage, DC ADC Analog Input 8-24 V 8-24 V 1 2 3 4 5 6 7 8 2.3 LED Description LED Description Cellular (Blue) GPS (Green) Zigbee (Aurburn) Searching for Cellular Network Cellular Carrier Lock Searching for satellite GPS Lock TBD Status LED OFF Fast Blinking once every 1 second Solid Blinking TBD 8 3 Device Mounting Options 3.1 Screw Mounting The XT-4860G2 has two flanges (two holes per) at each end of the housing for screw mounting the device to the mounting surface. 3.2 Magnetic Mounting The XT-4860G2 can also be equipped with magnets which support a load up to 10kg. 9 3.3 Optional Cradle Mounting An optional mounting cradle can be purchased for easy snap-on/snap-off device mounting for the XT-4860G2. The cradle will need to be screw-mounted on to the position desired. 10 4 Quick Start Guide 4.1 Device Wakeup To start up the device, simply hold the black button located near the circular connector on the side panel of the device for 3 seconds. You should see the blue C LED light up and then fade out. The LED will fast-blink when the device is successfully connected to the network. Wake up Button 11 4.2 Configuring the Device via SMS 1) Ensure your device is active on your cellular account. 2) Awaken device from sleep XT-4860G2 via the wake-up button. 3) If the device needs more power, then supply 12V DC via the red wire of the cable harness. 4) Ensure device cellular LED is blinking based on LED definition in this document. 5) Using your mobile phone or SMS gateway send +XT:1008 command to the device MDN 6) Command: +XT:1008,<SM>- Sets SMS Number 7) Response (via SMS): $$<UID>,<1008>,<SM>##
8) Once you have set SMS to reply to your mobile or gateway, you can now send other commands to device via SMS per device protocol documentation. a. Command +XT:1010 configures network settings b. Command +XT:3040 and +XT:3042 configure alert and threshold settings 9) +XT:7008 save device configuration to permanent memory 12 FCC/IC:
REGULATORY COMPLIANCE INFORMATION This equipment with FCC-ID: GKM-XT4820 and IC-ID: 10281A-XT-4820, Model: XT-4860G2 is subject to the Federal Communications Commission (FCC) and Industry Canada (IC) rules. NOTICE:
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and with license exempt Radio Standard Specifications of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Les changements ou modifications non expressment approuvs par la partie responsable de la conformit pourraient annuler l'autorit de l'utilisateur utiliser l'quipement. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le onctionnemen Radio frequency radiation exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 13