FCC ID: 2AKDT-IT1060B-C Graphic Drawing Tablet

User Manual Graphic Drawing Tablet 1 Content I. Overview ............................................................................................................................... 3 II. Accessories ............................................................................................................................ 4 III. Connection ............................................................................................................................ 4 IV. Support system ..................................................................................................................... 5 V. Download .............................................................................................................................. 5 VI. Installation ............................................................................................................................. 5 VII. Introduction to Driver ........................................................................................................... 6 1. Work area .............................................................................................................................. 6 2. Application ............................................................................................................................ 8 3. Pen settings ........................................................................................................................... 9 4. Express keys ........................................................................................................................ 11 5. Roller/ Touch ....................................................................................................................... 11 Settings ................................................................................................................................ 12 6. 2 I. Overview 1. Lanyard hole 2. Power key (Only for Bluetooth models): Press and hold for 3 seconds to turn on or off 3. USB-C 4. Shortcut keys 5. Indicator light (Three modes) a) Flashing: The stylus is in the work area, but not touching the pen tablet b) Always On: The stylus is in contact with the work area c) Off: The stylus is outside the work area 6. Bluetooth & Power Indicator light (Only for Bluetooth models) In blue status:

a) Flashing slowly: No Bluetooth connected b) Flashing quickly: Waiting for pairing with Bluetooth connection (Press the shortcut key on the top left for 3 seconds) c) Always On: Successfully paired In red status:

a) Flashing: Low battery (20%) b) Always On: Charging c) Off: Fully charged A purple color indicates that the red and the blue indicator are both On simultaneously 7. Work area

* All descriptions and pictures shown are for reference only and may differ from the actual 3 II. Accessories StylusNibNib extractorCable A-COTG AdapterBluetooth receiver

* All descriptions and pictures shown are for reference only and may differ from the actual products. III. Connection Wired Connection Connect the pen tablet to your computer. And make sure you can use the stylus to control the cursor. Wireless Connection (Only Bluetooth) A. Connection to the Bluetooth receiver Plug the Bluetooth receiver into the computer. Press and hold the power key for 3 seconds to turn on. B. Direct Bluetooth connection (Windows 10 orlater/Mac OS 10.10 or later) 1. Press and hold the power key for 3 seconds to turn on. Then press the shortcut key on the top left for 3 seconds to enter Bluetooth pairing (with the blue indicator flashingquickly) 2. Turn on the Bluetooth on the computer, set up and add Bluetooth device search for device name and complete Bluetooth pairing by clicking the device name

(with the blue indicator always on). 3. Press and hold the power key for 3 seconds to turn off. 4 IV. Support system Windows 7 or later Mac OS 10.10 or later Android 6.0 or later Chrome OS 88 or later Linux V. Download Please download the corresponding driver according to the model from the XP-PEN official website (https://www.xp-pen.com). VI. Installation After downloading is completed, please unzip the folder and operate the .exe file

(Windows) or .dmg (Mac) file, and then follow the prompts until installation is completed. Notes:

1. Before installation, please temporarily close the antivirus software and firewall, and all opened software. 2. 3. If other drivers have been installed on the computer, please uninstall them first. It is recommended to restart the computer after installation is completed. 5 4. In order to make your pen display the best performance, it is recommended that you regularly check the official website driver update. VII. Introduction to Driver After the driver is installed, connect your device to your computer, and then open the driver to start customizing your device. Notes:

This document describes all the functions of the driver, but the functions in the actual use process will vary due to different connected devices. Please refer to the device you actually used for specific functions. Save settings:

Please click the OK button on the left side of the driver interface to save the settings after changing the configuration; otherwise, the changed settings will be valid only when it is currently used. 1. Work area 1.1 Screen If multiple monitors are used in duplicate mode (i.e. All monitors display the same picture), the work area of the device will be mapped to all monitors. When the pen moves in the work area, the cursor on all monitors will move at the same time. If multiple monitors are used in extended mode,on the driver page, select which display the device work area is mapped to. The driver provides three modes to set the display area of the screen:

(1) Set full screen: Set the screen area of the selected monitor to the maximum.

(2) Set screen area: Use the mouse to manually set the display area of the screen. Click the first position (top left) of the display area of the screen with the mouse, and then click the second position (bottom right). 6

(3) Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W and H to customize the size of the display area of the screen, or use the mouse to drag on the screen icon of the driver interface to adjust the display area of the screen. Calibrate:

Calibrate the offset between the stylus and the cursor. Show display number:

Identify all connected monitors, and numeric identifiers will be displayed in the lower- left corner of each monitor. 1.2 Pen tablet/display Set the work area of the device to be mapped as the display area of the screen. The driver provides four modes for selection:

(1) Full tablet area: Maximize the work area of the device.

(2) Tablet proportion: Scales the work area of the device to the entire display area of the selected monitor.

(3) Set tablet area: Use the stylus to click the "upper left corner" position and the

"lower right corner" position on the pen tablet to select the work area of the device.

(4) Customize: Manually enter coordinates in the corresponding input boxes below X, Y, W and H to determine the size of the work area of the device, or use the stylus to drag on the device icon on the driver interface to set the size of the work area. Rotation setting:

You may set the device to 0, 90, 180 & 270. After finishing the setting, you also need to rotate the device to the corresponding direction. Rotating 180 means to change to the left-handed mode. Display setting:

Set the "color temperature ", "Brightness" and "contrast" of the pen display. 7 2. Application After selecting the application, set the function you want for this application. a. Click the + on the top right of the application bar to open the application selection interface. b. Select application to be added from the running program or click the browse button to add from the installed software; after the application is selected, the path of the selected application will be displayed at the bottom. c. Click the OK button at the bottom of the interface, and the application just selected will be added to the application bar. 8 3. Pen settings When the pen is in the work area, it is automatically added to the drive, multiple pens are supported, and each pen can be configured differently. (For different pen models only) Pen keys:

Click the drop-down menu to "Customize" the pen button function. Notes:

When the pen is within the working range of the device, singly click the key to switch the pen or eraser mode. After switching the mode, the current mode will be displayed at the bottom of your screen. Selecting Use mouse control and input from keyboard in the customize function allows you to customize functions of the combination key. Mouse control:

Set Shortcut keys. With the Keyboard Shift and Left Click selected, shortcut actions are enabled in software that supports such combination key. Keyboard:

You may configure keyboard shortcuts here, for example, set it as Alt+A in 3D MAX software, and an alignment tool can be used. 9 You may set multiple sets of keyboard shortcut here. When you press the button on the pen, all the shortcuts functions you set will run again. The functions displayed in the red box will be different upon different devices. Precision mode:

Precision mode is to limit the work area of the device to a certain area, and more detailed drawing can be made in this area. Pressure adjustment The sensitivity of pressure can be adjusted by adjusting the output and pen pressure curve or moving the slider on the progress bar. Current pressure can test your current pen pressure. Mouse mode The mouse uses the absolute mode by default. Check this to use the relative mode. After selecting it, you can adjust the speed of the cursor. Absolute coordinate (pen mode): Map the work area to the display area. Relative coordinate (mouse mode): The operation method of this mode is the same as that of a normal mouse. Windows Ink Some drawing software can support Windows Ink pen pressure, and you can select or cancel Windows Ink to open or close this function which is opened by default. 10 4. Express keys ForproductswithExpresskeys To use the express key of the device, set the input method to English mode. Setting to another mode may not function correctly. The express key of the device is the command key of Photoshop as the default value. You can customize express keys according to your personal needs, different devices have different numbers of express keys. If the device has a roller or a touch, it is recommended that you set one of the express keys to Switch Ring function(if applicable), so that to switch roller or touch control function. Customize express key:

Select customize from the drop-down menu to customize the function of each express key. The setting steps are the same as those of pen keys (see 3. Pen settings). 5. Roller/ Touch ForproductswithRoller/Touch 5.1 Roller Select the function you want to use from the default four groups of functions. You can customize or set this function to invalid. Customize 11 In the custom settings, you can set KL and KR to corresponding key combinations and custom name them. 5.2 Touch Roller mode: Thesetup steps is the same as the Roller (see 5.1 Roller). Mouse mode: Use the touchpad as a mouse. 6. Settings Disable Express Key:

12 Close functions of all express keys. Disable Message:

When using the express keys, no prompt message will be displayed at the bottom of the screen. Disable Pressure:

You will not feel the pressure of the stylus when using the stylus. Disable tilt:

Disable the tilt function of the stylus. Diagnostic tool:

If there is any problem while using the driver, you can use a diagnostic tool. Import & export config:

You can import and export the configured express keys and other functions to store and read their settings. Notes:

When you need to import & export the changed functions, please click the OK button on the left side of the driver interface first to save the configuration. FCC regulatory conformance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

instructions, may cause harmful in accordance with the

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help 13 NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. RF Exposure The device has been evaluated to meet general RF exposure requirement. The devi ce can be used in portable exposure condition without restriction If you need any further assistance, please contact us at:

Website : www.xp-pen.com Email: service@xp-pen.com 14

XPPEN Technology CO. Agent Authorization y CO. Company: XPPEN Technolog Address: 15350 Fairfield R anch Road, Chino Hills, CA, 91709, US Product Name: Graphic Drawing Tablet Model Number(s):

fT851B, JT12808-E, IT852B-E, ITI 060B, IT I 060B-E, ITl281B, fT85IB -E, ITI061B,ITl0618-E, IT853B, ITl 280B, ITl281B-E, IT853B-E IT 12828, ITI 2828-E, lTI 062B, ITI 0628-E, lT850B-E, lT1060B, lT850B, IT852B, Product Description: Graphic Drawing Tablet We authorize to act on oubehalfon all matters equipment MiCOM Labs Inc., 575 Boulder Court, Pleasanton, concerning the certcation California of above named 94566, USA, that MiCOM Labs Inc. is allowed We declare approval discuss MiCOM Labs on our behalf shall have the same effect all information to the regulatory agencies out by Any and all acts carried related to the and to as required any issues concerning application. and certcation of equipment the approval as acts of our own to forward Signature:

Name: Tiaer Li Title: general manager Company: XPPEN Technology CO. Date: 2022.04.24

XPPEN Technology CO. Technology of Engineering Office Federal Communications 7435 Oakland Mills Road Columbia, USA MD 2'1046 Commission Subject;

FCC ID: 2AKDT-IT1060B-C Request for Confidentiality Date: 2022/04/24 To Whom It May Concern, Pursuant are requesting documents from public to the provisions of the Commission's rules Title 47 Sections0.457 attachment(s) the following as confidential and0.459, we the Commission to withhold disclosure indefinitely These documents contain proprietary information might be hamfulto our company and would give competitors system and equipment of the equipment. detailed in operation The public disclosure of these documents in the market an unfair advantage descriptions and are considered as Schematic Diagram BlockDiagram PartsList Operational Description SOFTWARESECURITY REQUIREMENTS FOR U-NII DEVICES lU ctUUV Ill11tiu11 111 c1uuitiu11c1i in Title 47 CFR2.803 and the importation business authorized information we request sensitive devices, remains Short Term Confidentiality confidential UUUGUIIIC:lll:,j, i11 u1ue1 lU GUlllfJiy rules in Title 47 CFR2.1204, that while ensuring until the actual marketing of newly of the following attachment(s), vvitil ll flldl K 11\,j \,jUldtiUll::i ExternalPhotos TestSetup Photos Internal UserManual Photos For45 days, pursuant to Public Notice DA 04-1705 OR For180 days pursuantto KDB 726920 001 It is our understanding correspondence documents is issued authorization Sincerely, __. Signature: L1v Name: Tiger L Title:

Email: lsb@ugee.com.cn manager general that all measurement test reports, FCC ID label format and during the certcation review process and this information will be available for public cannot be granted as confidential review once the grant of equipment

XPPEN Technology CO. Family models declaration letter. 2022-4-25 We Company: XPPEN Technology CO. Address: 15350 Fairfield Ranch Road, Chino Hills, CA, 91709, US Product: Graphic Drawing Tablet Model Name: IT1060B Family Model: [T850B, IT850B-E, ITLO60B, ITLO60B-E, IT1280B, IT1280B-E, IT851B, IT851B-E, IT1061B, IT1061B-E, IT1281B, IT1281B-E, IT852B, IT852B-E, IT1062B, IT1062B-E, IT1282B, IT1282B-E, IT853B, IT853B-E All models are the same circuit and RF module, except the Model name. Thanks Sincerely, Signature Tage by

[Name] Tiger Li

[Title] general manager VDDENI Tashnalaay OM oy