INSTALLATION 50.0 48.5 DIMENTSION
*Unit:mm IDC TERMINATION POWER INPUT EASY TERMINATION TOOL Notes Specification One 100/1000 Gigabit Ethernet Port One 100/1000 Gigabit Ethernet Port 2.4GHz 20MHz, 40MHz HTTP Web Browser 2 LEDs Reset Button
- Capable of restoring to factory default settings, holding over 5 seconds
- Capable of resetting to system reboot holding less than 5 seconds IPEX antenna connector 2
Acess Point DHCP Client / Server / Pre-definable IP DNS Proxy or DNS Relay Dynamic IP (DHCP) / Static IP assignment Specification Feature General LAN Port WAN Port Frequency band Bandwidth Network Management Local management Hardware LED Interfaces Radio Antenna Output Power Networking Internet Access Mode DHCP DNS WAN Connection Type Wifi Standard WLAN Schedule Security QoS IEEE802.11 b/g/n
- Enable/disable wireless interface perday and timeslots base
- Activate/Deactivate via HTTP
- From Sunday to Saturday, 24 hours wireless operation can be timer programmable. WPA-PSK / WPA2-PSK WMM Auto Channel Selection, User Selectable Scan Interval Programmable Channel Operational Temperature Ambient temperature Operating Humidity Storage Humidity Storage Temperature IDC Connect Connect Type Power Power input DAN-CHIEF reserves the right to modify and change technical specification.
-20~50 C 10 to 90% RH (non-condensing) 5 to 90% RH (non-condensing)
-20~70 C AC power adaptor: 100-240 VAC50/60Hz 110/KRONE TERMINAL BLOCK with 22~23AWG Solid Cable You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.7KHGLVWDQFHEHWZHHQXVHUDQGSURGXFWVVKRXOGEHQROHVV
WKDQFP
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.